Immobilized ruthenium complexes and aspects of their reactivity

Methodologies for the immobilization and characterization of ruthenium complexes into/onto functionalized silica gel, zeolites, polymers, dendrimers, sol–gel, nano and microparticles are described. The corresponding spectroscopic, electrochemical, and photochemical properties as well as chemical reactivities are used for their characterization and study. Comparison between the reactivities of immobilized and in solution species is presented. Some biological applications are also described.     

Characterization of polyether‐poly(methyl methacrylate)‐lithium perchlorate blend electrolytes

Solid polymer electrolyte (SPE) systems based on interpenetrating blends of poly(ethylene oxide‐co‐propylene oxide) and poly(methyl methacrylate) host matrices, with lithium perchlorate as guest salt, were prepared. These electrolytes were presented as free‐standing films, and their thermal and electrochemical properties were characterized by conductivity and electrochemical stability measurements. The properties of the interpenetrating blends of poly(ethylene oxide‐co‐propylene oxide) and poly(methyl methacrylate) host matrices as the electrolyte component of a solid‐state electrochromic device are reported and the results obtained suggest that this electrolyte provides an encouraging performance in this application. The most conducting electrolyte composition of this SPE system is the formulation designated as SPE2‐0PC (5.01 × 10^?4 S cm^?1 at about 57°C). The lowest decomposition temperature was registered with the SPE6‐15PC composition (233°C). The average transmittance in the visible region of the spectrum was above 41% for all the samples analyzed. After coloration the device assembled with 71 wt% PC presented an average transmittance of 15.71% and an optical density at 550 nm of 0.61. Copyright © 2010 John Wiley & Sons, Ltd.     

Reducibly degradable hydrogels of PNIPAM and PDMAEMA: Synthesis,stimulus‐response and drug release

Reducibly degradable hydrogels of poly(N‐isopropylacrylamide) (PNIPAM) and poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) were synthesized by the combination of reversible addition‐fragmentation chain transfer (RAFT) polymerization and click chemistry. The alkyne‐pending copolymer of PNIPAM or PDMAEMA was obtained through RAFT copolymerization of propargyl acrylate with NIPAM or DMAEMA. Bis‐2‐azidyl‐isobutyrylamide of cystamine (AIBCy) was used as the crosslinking reagent to prepare reducibly degradable hydrogels by click chemistry. The hydrogels exhibited temperature or pH stimulus‐responsive behavior in water, with rapid response, high swelling ratio, and reproducible swelling/shrinkage cycles. The loading and release of ceftriaxone sodium proved the feasibility of the hydrogels as the stimulus‐responsive drug delivery system. Furthermore, the presence of disulfide linkage in AIBCy favored the degradation of hydrogels in the reductive environment. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3604–3612, 2010     

Effect of amine catalysts on preparation of nanometric SiO<Subscript>2</Subscript> particles and antireflective films via sol–gel method

SiO₂ sols were prepared by hydrolysis and condensation reactions of tetraethyl orthosilicate through a one step acid or a two step acid + base catalysis process, in the presence of nitric acid and four different base catalyzers, namely trimethylamine, triethylamine, tripropylamine and tributylamine. Hydrolysis of TEOS was followed by FT-IR analyses. Particle size distributions of the sols were evaluated after predetermined durations in 1–22 days. Particle growth was seen to be faster in amine catalyzed systems than in one step acid catalyzed system. The highest rate of growth was in triethylamine catalyzed system. Glass substrates were dip coated with the prepared SiO₂ sols. Effect of sol aging duration on film thickness and on light transmittance properties of the films was investigated with respect to type of base catalyst. Thicknesses of the films which were measured to be in the range of 100–400 nm, were seen to increase with aging duration of the sols. Triethylamine catalyzed system presented the highest film thickness. Films obtained from one step acid catalyzed system presented an increase of 4.8%; whereas acid + base catalyzed films provided an increase in the light transmittance of 5.7% in the first 4 days of aging. Surfaces of films were examined by FESEM and AFM. The antireflective character of the films was verified by diffuse reflectance analyses.     

Synthesis,microwave‐promoted catalytic activity in Suzuki–Miyaura cross‐coupling reactions and antimicrobial properties of novel benzimidazole salts bearing trimethylsilyl group

A mixture of benzimidazole salts (2–7), Pd(OAc)₂ and K₂CO₃ in DMF–H₂O catalyzes the Suzuki–Miyaura cross‐coupling reactions promoted by microwave irradiation resulting in high yield within a short time. In particular, the yield of the Suzuki–Miyaura reactions with aryl bromides was found to be nearly quantitative. The synthesized benzimidazole salts (2–7) were identified by ¹H‐¹³C, NMR, IR spectroscopic methods and microanalysis. The molecular structure of 1 was determined by X‐ray crystallography. The antibacterial and antifungal activities of the novel benzimidazole derivatives (1–7) were also tested against standard strains. Copyright © 2011 John Wiley & Sons, Ltd.     

Temperature dependent in situ doping of ALD ZnO

This study on ALD grown ZnO layers is aimed at the systematic study of the effect of incorporation of different Al contents on the properties of the layers. An alternate precursor pulse method was used for layer deposition. Optimal doping was achieved at 210 °C at 2 at% Al content. A relationship between crystalline morphology versus temperature and aluminium incorporation was established.     

Thermal analysis of hair treated with oxidative hair dye under influence of conditioners agents

This research aimed the effect on Caucasian hair tresses treated with oxidative hair dye, either incorporated or not with conditioners agents, analyzed by Differential Scanning Calorimetry (DSC) and Thermogravimetric analysis (TG). The formulations of hair dyes were emulsions oil-in-water with light blond color containing or not the conditioners agents: silanetriol and panthenol; PEG-12 dimethicone; hydrolyzed silk, hydrolyzed milk protein, and lactose. Each dye (1.5 g) was applied in the hair tress (2.0 g/20.0 cm of length of Caucasian light-brown), previously treated, more 1.5 g of hydrogen peroxide 20 vol during 40 min. Evaluation of mass loss of the different hair sample demonstrates that these chemical hair treatments impair the hair fibers, reduced their moisture content with respect to the untreated hair. The incorporation of conditioners agents (silanetriol and panthenol; PEG-12 dimethicone; hydrolyzed silk, hydrolyzed milk protein, and lactose) in oxidative hair dyes types did not decrease the damage caused on the tresses by the coloring process quantified by TG/DTG. However, the DSC curves demonstrated those conditioners agents (silanetriol and panthenol; PEG-12 dimethicone) dislocated the beginning of the third event in 20 °C and they inhibited the presence of the fourth event, having characterized thermal protection to the hair.     

Niobium oxide solid catalyst: esterification of fatty acids and modeling for biodiesel production

Biodiesel can be obtained from fatty acid raw materials through esterification. The reactivity of lauric, palmitic, stearic, oleic, and linoleic fatty acids with methanol using powdered niobic acid as a heterogeneous catalyst was investigated in this work, both experimentally (in a batch reactor) and theoretically. A 2³ experimental design was used, with methanol/fatty acid molar ratio, catalyst concentration, and temperature as main factors. An empirical model demonstrated that temperature is the most important variable. Fourteen heterogeneous and 56 homogeneous‐like kinetic models were tested. A homogeneous‐like model considering zero order for all species and inhibition by water was the most adequate for experiments without catalyst. A homogeneous‐like model considering a second‐order reaction in relation to the fatty acid and no water inhibition was the most adequate for niobic acid catalyzed reaction. Molecular modeling confirmed the experimental results showing that the reactivity is directly related to the increase of unsaturated bonds and the reduction of carbon chain length. The polarity of the fatty acid is determinant in the reactivity. At the molecular level, reaction occurs between the HOMO orbital of methanol and LUMO orbitals of fatty acids and reactivity is higher when the energy difference between these orbitals is lower. Copyright © 2010 John Wiley & Sons, Ltd.