FLAVIN-MEDIATED PRODUCTION OF HYDROGEN PEROXIDE IN PHOTOELECTROCHEMICAL CELLS

A photoelectrochemical cell for hydrogen peroxide production using flavin photosystems is described. The anodic solution, which is kept free of oxygen by passing an Ar stream through it, contains the photoreceptor (flavin mononucleotide or lumiflavin) and the electron donor (EDTA, semicarbazide or hydroxylamine), while the peroxide is formed at the electrode of the cathodic solution, whose oxygen content is increased by bubbling with pure oxygen. Among several electrode metals that have been tested (Ag, Pt and Hg), Hg is the most efficient. The pH of the anodic and cathodic solutions should be adjusted to 14 and 1, respectively, for optimum results.     

Phase transitions and hindered rotation in dimethylacetylene at high pressures probed by Raman spectroscopy

We present Raman spectroscopy experiments in dimethylacetylene (DMA) using a sapphire anvil cell up to 4 GPa at room temperature. DMA presents phase transitions at 0.2 GPa (liquid to phase I) and 0.9 GPa, which have been characterized by changes in the Raman spectrum of the sample. At pressures above 2.6 GPa several bands split into two components, suggesting an additional phase transition. The Raman spectrum of the sample above 2.6 GPa is identical to that found for the monoclinic phase II (C2/m) at low temperatures, except for an additional splitting of the band assigned to the fourfold degenerated asymmetric methyl stretch. The global analysis of the Raman spectra suggests that the observed splitting is due to the loss of degeneracy of the methyl groups of the DMA molecule in phase II. According to the above interpretation, crystal phase II of DMA extends from 0.9 GPa to pressures close to 4 GPa. Between 0.9 and 2.6 GPa, the methyl groups of the DMA molecules rotate almost freely, but the rotation is hindered on further compression.     

Ethanol production from steam-explosion pretreated wheat straw

Bioconversion of cereal straw to bioethanol is becoming an attractive alternative to conventional fuel ethanol production from grains. In this work, the best operational conditions for steam-explosion pretreatment of wheat straw for ethanol production by a simultaneous saccharification and fermentation process were studied, using diluted acid [H₂SO₄ 0.9% (w/w)] and water as preimpregnation agents. Acid-or water-impregnated biomass was steam-exploded at different temperatures (160–200°C) and residence times (5, 10, and 20 min). Composition of solid and filtrate obtained after pretreatment, enzymatic digestibility and ethanol production of pretreated wheat straw at different experimental conditions was analyzed. The best pretreatment conditions to obtain high conversion yield to ethanol (approx 80% of theoretical) of cellulose-rich residue after steam-explosion were 190°C and 10 min or 200°C and 5 min, in acid-impregnated straw. However, 180°C for 10 min in acid-impregnated biomass provided the highest ethanol yield referred to raw material (140 L/t wheat straw), and sugars recovery yield in the filtrate (300 g/kg wheat straw).     

A theoretical study on the low-lying excited states of 2,2':5',2'-terthiophene and 2,2':5',2':5',2'-quaterthiophene.

The nature and properties of the low-lying singlet and triplet valence excited states of 2,2':5',2'-terthiophene (terthiophene) and 2,2':5',2':5',2'-quaterthiophene (tetrathiophene) are discussed on the basis of high-level ab initio computations. The spectroscopic features determined experimentally for short alpha-oligothiophenes are rationalised on theoretical grounds. Special attention is devoted to the nonradiative decay process through intersystem crossing (ISC) from the singlet to the triplet manifold, which is known to be relatively less efficient in tetrathiophene. Along the geometry relaxation of the S1 state of terthiophene, the S1 and T2 states become degenerate, which leads to a favourable situation for the occurrence of ISC. The parallel process is expected to be less favoured in tetrathiophene because of the less efficient spin-orbit coupling and the increase of the S1-T2 energy gap.     

Surface tension and density of mixtures of 1,3-dioxolane+alkanols at 298.15 K: analysis under the extended Langmuir model

Surface tensions (sigma) for [1,3-dioxolane+methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, 2-butanol, and 1-pentanol] and excess molar volumes (v(E)) for [1,3-dioxolane+methanol, ethanol, 1-propanol, 2-propanol, and 2-butanol] at the temperature 298.15 K and normal atmospheric pressure have been determined as a function of mole fractions. The magnitude of these experimental quantities is discussed in terms of the nature and type of intermolecular interactions in binary mixtures. In order to analyze the surface tension behavior, the extended Langmuir (EL) model was used and the results obtained for the systems containing 1,3-dioxolane were compared with those of other formerly published series: [1,4-dioxane+alkanes] and [1,4-dioxane+alcohols].     

Small-volume radial flow cell for all-solid-state ion-selective electrodes

A flow cell with a radial distribution of four all-solid-state ion selective electrodes (ISEs), or alternatively three ISEs and one reference electrode, was designed and optimized for mass production. The radial distribution of the electrodes reduces the cell volume and is expected to minimize cross-contamination between different electrodes. Two different cell prototypes were developed and tested for all-solid-state K⁺-ISEs based on a solvent polymeric ion-selective membrane (ISM) and a conducting polymer, poly(3,4-ethylenedioxythiophene), as solid internal contact. In the first prototype, PEDOT was electropolymerized from an aqueous solution of the monomer and the doping ion salt, sodium polystyrenesulfonate (NaPSS). The second prototype employed an aqueous dispersion of PEDOT(PSS) that is commercially available (Baytron P, Bayer AG). Compared to electrochemical synthesis, solution casting of the polymer dispersion was found to be a more advantageous method to deposit the conducting polymer layer aiming at mass production. The resulting prototypes of the flow cell had a small volume (ca. 17-37 μl), which makes them suitable for application in clinical analysis.     

Assembly of a supramolecular capsule on a molecular printboard

A molecular capsule based on ionic interactions between two oppositely charged calix[4]arenes, 1 and 2, was assembled both in solution and on a surface. In solution, the formation of the equimolar assembly 1.2 was studied by (1)H NMR, ESI-MS, and isothermal titration calorimetry, giving an association constant (K(a)) of 7.5 x 10(5) M(-1). A beta-cyclodextrin self-assembled monolayer (beta-CD SAM) on gold was used as a molecular printboard to anchor the tetraguanidinium calix[4]arene (2). The binding of tetrasulfonate calix[4]arene 1 was monitored by surface plasmon resonance spectroscopy. Rinsing of the surface with a high ionic strength aqueous solution allows the removal of the tetrasulfonate calix[4]arene (1), while by rinsing with 2-propanol it is possible to achieve the complete desorption of the tetraguanidinium calix[4]arene (2) from the beta-CD SAM. The K(a) for the capsule formation on a surface is 3.5 x 10(6) M(-1), thus comparing well with the K(a) determined in solution.     

Coordination versatility of pyridine-functionalized N-heterocyclic carbenes: a detailed study of the different activation procedures. Characterization of new Rh and Ir compounds and study of their catalytic activity

Three different reaction procedures for the coordination of N-n-butyl-N'-(2-pyridylmethyl)imidazolium salt have produced new N-heterocyclic complexes of Rh and Ir. The direct reaction of the imidazolium salt with [IrCl(cod)](2) provides a NHC-Ir(III)-H complex, while transmetalation from a silver-NHC complex and deprotonation with NEt(3) give new NHC complexes of M(I) and M(III) when reacting with [MCl(cod)](2) or [MCl(coe)(2)](2) (M = Rh, Ir). The crystal structures of the biscarbene Rh(III) and Ir(III) complexes are described. The catalytic properties of the compounds obtained have been tested in the hydrosilylation of acetylenes, the cyclization of acetylenic carboxylic acids, and hydrogen transfer to ketones.     

Staphylococcus aureus bicomponent gamma-hemolysins, HlgA, HlgB, and HlgC, can form mixed pores containing all components

Staphylococcal gamma-hemolysins are bicomponent toxins forming a protein family with leucocidins and alpha-toxin. Two active toxins (AB and CB) can be formed combining one of the class-S components, HlgA or HlgC, with the class-F component HlgB. These two gamma-hemolysins form pores with marked similarities to alpha-toxin in terms of conductance, nonlinearity of the current-voltage curve, and channel stability in the open state. AB and CB pores, however, are cation-selective, whereas alpha-toxin is anion-selective. gamma-Hemolysins' pores are hetero-oligomers formed by three or four copies of each component (indicated as 3A3B and 3C3B or 4A4B and 4C4B). Point mutants located on a beta-strand of the class-S component that forms part of the protomer-protomer contact region can prevent oligomer assembly. Interestingly, these mutants inhibit growth of pores formed not only by their natural components but also by nonstandard components. This lead to the hypothesis that mixed ABC pores could also be formed. By studying the conductance of pores, assembled in the presence of all three components (in different ratios), it was observed that the magnitudes expected for mixed pores were, indeed, present. We conclude that the gamma-hemolysin/leucocidin bicomponent toxin family may form a larger than expected number of active toxins by cross-combining various S and F components.