Quantum Circuit Optimization for Solving Discrete Logarithm of Binary Elliptic Curves Obeying the Nearest-Neighbor Constrained

In this paper, we consider the optimization of the quantum circuit for discrete logarithm of binary elliptic curves under a constrained connectivity, focusing on the resource expenditure and the optimal design for quantum operations such as the addition, binary shift, multiplication, squaring, inversion, and division included in the point addition on binary elliptic curves. Based on the space-efficient quantum Karatsuba multiplication, the number of CNOTs in the circuits of inversion and division has been reduced with the help of the Steiner tree problem reduction. The optimized size of the CNOTs is related to the minimum degree of the connected graph.     

高性能计算机用热管复合制冷系统设计研究

根据高性能计算机全天候温控的需要,提出了综合应用蒸气压缩和动力型分离式热管制冷技术的复合冷源方案。在冬季及春、秋过渡的低温季节,运行热管循环不仅大幅降低环控装置的能耗,而且可以避免在低温环境运行压缩式制冷易发生的冷启动、回油润滑等问题。提出了蒸气压缩制冷、蒸气压缩/热管复合制冷和热管制冷的分区工作模式,引入复合制冷模式有效拓宽了热管运行温区,大幅提高了制冷系统的综合COP。模拟分析了在北京地区应用热管复合制冷技术的节能性能,相比常规的压缩制冷节能率高达40%。研究表明:热管复合制冷系统具有显著的节能减排优势,特别适用于全天候工作的机房、基站等高热密度电子集成系统的温控。     

氨吸收式串联型动力/制冷复合循环

本文提出了一种新型的采用氨水混合工质的动力／制冷复合循环,该循环以中低温工业余热或燃气轮机排气为热源,将动力、制冷子循环采用串联方式连接,基础循环工质为氨质量浓度为0．27的氨水溶液,热源为365℃／104．3 kPa 的热空气,透平进气参数为350℃／3750 kPa,,以热效率η1、(火用)效率η2作为评价准则,模拟计算表明本循环的热效率η1 为17．8％,炯效率η2为45％,通过与其它有代表性的分供系统及联供系统进行热力性能方面的比较,表明本循环η1、η2均有不同程度提高。     

离散颗粒层被横向推移过程中的力学行为研究

研究发现,颗粒物质层被匀速推移挤压过程中,所需推移力先以线性规律增加,在某一确定点后,则会以指数规律增加.而颗粒物质是由众多离散颗粒组成的软凝聚态物质,其宏观上反映的是离散颗粒的个体性质和凝聚态物质的集体效应.颗粒与颗粒之间以及颗粒与边界之间的细观尺度接触力链的构成以及演变规律将会直接影响各种宏观受力情况,其摩擦力与挤压力便是力链的主要构成形式.围绕着定量描述细观力链特征,从而揭示力的变化规律这一目标,采用计算机模拟的方法,依照球形颗粒Hertz法向接触理论和Mindlin-Deresiewicz切向接触理论,对重力作用下不同数目的三维等径球体颗粒层的推移情况进行了离散元仿真模拟,量化分析了推移力变化规律、各摩擦力变化规律以及力链分布规律,发现摩擦力与挤压力在颗粒堆积的不同阶段对力链的构成起到了不同的主次作用,使得力链发生强弱演变,从而发现了推移颗粒物质层时推移力的变化规律及原因.这些结果有利于从力链角度揭示颗粒内部和颗粒与各边界之间的受力情况.     

非等电子Sb替换Cu和Te后黄铜矿结构半导体Cu_3Ga_5Te_9的热电性能

热电材料是一类能够实现热与电相互转换的功能材料,在制冷和发电领域极具应用潜力.本文采用金属Sb元素非等电子替换Cu3Ga5Te9化学式中的Cu和Te,观察到材料Seebeck系数和电导率提升的现象.这些电学性能的改善与载流子浓度和有效质量的增大及迁移率基本维持不变有关.载流子浓度的提高是由于Sb原子占位在Te晶格位置后费米能级进入到价带所产生的空穴掺杂效应所致,同时也与Cu含量减少后铜空位(V-1Cu)浓度增大相关联.另外,非等电子替换后,阴离子(Te2-)移位导致了晶格结构缺陷参数u和η的改变,其改变量fiu和fiη与材料晶格热导率(κL)的变化密切相关.在766 K时,适量的Sb替换量使材料的最大热电优值(ZT)达到0.6,比Cu3Ga5Te9提高了近25%.因此,通过选择替换元素、被替换元素及替换量有效地调控了材料的电学及热学性能,在黄铜矿结构半导体中实现了非等电子元素替换改善热电性能的思想.     

双偏振结构保偏光纤偏振器的研制

提出了保偏光纤偏振器的一种串联结构,即双偏振结构,报道了研制的结果。并通过对单偏振结构和双偏振结构器件测试结果的比较,得出双偏振结构的保偏光纤偏振器可使器件达到高消光比,并且有稳定的温度特性。     

Bioavailability Enhancement of Cepharanthine via Pulmonary Administration in Rats and Its Therapeutic Potential for Pulmonary Fibrosis Associated with COVID-19 Infection

Cepharanthine (CEP) has excellent anti-SARS-CoV-2 properties, indicating its favorable potential for COVID-19 treatment. However, its application is challenged by its poor dissolubility and oral bioavailability. The present study aimed to improve the bioavailability of CEP by optimizing its solubility and through a pulmonary delivery method, which improved its bioavailability by five times when compared to that through the oral delivery method (68.07% vs. 13.15%). An ultra-performance liquid chromatography tandem-mass spectrometry (UPLC-MS/MS) method for quantification of CEP in rat plasma was developed and validated to support the bioavailability and pharmacokinetic studies. In addition, pulmonary fibrosis was recognized as a sequela of COVID-19 infection, warranting further evaluation of the therapeutic potential of CEP on a rat lung fibrosis model. The antifibrotic effect was assessed by analysis of lung index and histopathological examination, detection of transforming growth factor (TGF)-β1, interleukin-6 (IL-6), α-smooth muscle actin (α-SMA), and hydroxyproline level in serum or lung tissues. Our data demonstrated that CEP could significantly alleviate bleomycin (BLM)-induced collagen accumulation and inflammation, thereby exerting protective effects against pulmonary fibrosis. Our results provide evidence supporting the hypothesis that pulmonary delivery CEP may be a promising therapy for pulmonary fibrosis associated with COVID-19 infection.     

Configuration of the valence neutrons of 17B

The reaction cross section of ~(17)B on ~(12)C target at(43.7±2.4)MeV/u has been measured at the Radioactive Ion Beam Line in Lanzhou(RIBLL).The root-mean-square matter radius(R_(rms))was deduced to be(2.92±0.10)fm,while the R_(rms)of the core and the valence neutron distribution are 2.28 fm and 5.98 fm respectively.Assuming a"core plus 2n"structure in ~(17)B,the mixed configuration of(2s_(1/2))and(1d_(1/2))of the valence neutrons is studied and the s-wave spectroscopic factor is found to be(80±21)%.     

红外偏振成像对伪装目标的探测识别研究

针对目前普通光电成像系统对伪装目标的探测和识别概率较低的状况,提出伪装目标的探测识别新技术研究。介绍了红外偏振成像系统的原理、组成和特点,研制的中波/长波红外偏振成像装置,其波段范围为3 m ~5 m和8 m~12 m,线偏振度95%,消光比大于100∶1,给出了试验分析数据和偏振融合效果图。研究表明,采用红外偏振成像技术可以有效地实现对地面伪装目标的探测和识别。研究结果还可以扩展到对人工假目标、空中隐身目标等的探测和识别。     

一种改进的夜间数字能见度测量方法

为降低背景光噪声对数字摄像法夜间能见度测量的不确定性影响,对双光源法能见度测量系统进行改进。该系统利用避光筒限制CCD相机视场角,拍摄2个位于不同距离的LED背光源,然后对摄取到的图像进行处理得到光源图像的灰度值,再根据阿拉德定律求得大气消光系数,计算出大气能见度值。通过在无背景光、有背景光未加避光筒和加避光筒3种条件下的比对实验,分析光源图像的灰度信息,并将实验结果进行处理,得出有避光筒和无避光筒时测得的能见度值与无背景光下测量结果的相关系数分别是0.911 3和0.322 7,均方根相对偏差分别是6.87% 和23.38%。结果表明:系统抑制背景光噪声的能力明显增强,能较准确地测量夜间能见度。