基于随机耦合模型的系统级电磁环境效应分析

通过宽频带电磁环境下计算机机箱关键部位感应电压统计分布的实验验证和基于随机矩阵理论的耦合模型的理论计算研究,给出了随机耦合模型(RCM)的应用流程和计算方法;就散射系数、归一化散射和归一化阻抗矩阵的统计特性进行了理论和实验研究,实验测量结果与理论分析结果非常一致;针对RCM的应用进行了初步分析,验证了随机耦合模型在复杂电磁环境下系统级效应分析和预测的适用性。结果证明此方法尤其适用于大型的具有非平行面封装腔体电子设备的电磁兼容、效应及评估等研究。     

4层圆盘锥形磁绝缘传输线的电流测量

为获取PTS装置磁绝缘传输线的电流,设计、标定了微分环。探头使用镍铬合金膜屏蔽空间电子,采用在线标定。设计相应的馈入结构从负载区分别对不同层磁绝缘传输线馈入信号,在每个三平板传输线出口的板堆过渡区位置安装短路杆,能够在磁绝缘传输线上得到基本均匀的电流,实现电流探头的逐层标定。频响分析表明金属膜屏蔽效应导致探头的高频特性变差。实验表明,贴膜的探头频响上限为50.3 MHz,满足被测信号的要求。实测PTS装置磁绝缘传输线电流与负载区电流的测量结果自洽,且各层电流与总电流等结果符合理论预计。     

多层轴向绝缘堆的电压电流测量

为获取初级试验平台(PTS)装置分层真空轴向绝缘堆的电压电流,设计、标定了微分型电容分压器和微分环。探头的频响实验表明：绝缘堆电压、电流探头的频响上限分别为270 MHz和100 MHz。两种探头均采用在线标定方法来确定幅值灵敏度系数。电压探头在标定时应当保留绝缘堆外侧的水介质,以保证探头附近电场分布不发生改变。PTS装置的实验结果表明：当装置外围馈入电流基本均匀时,绝缘堆电压电流测量结果与相关测试结果自洽,与理论值基本符合;当馈入绝缘堆的电流分布不均匀时,不同角向探头测量结果的偏差导致总电流计算结果的误差较大。     

重频超宽带脉冲干扰低噪声放大器

理论分析和仿真研究了重频超宽带脉冲对低噪声放大器（LNA）的干扰特征,给出了高斯脉冲幅度、脉宽及重频等参数对LNA干扰效果的规律,对工作于40~80 MHz频段的接收机LNA开展了相关验证实验。结果表明：干扰特征主要由LNA工作频带和脉冲参数决定;不同脉冲参数对干扰的效果影响不同,脉冲幅值的影响最显著;在验证实验研究的参数范围内,增大高斯脉冲幅度、脉宽和重频均有利于增强对LNA的干扰效果。     

布里渊散射谱拟合的混合优化算法

基于布里渊光时域分析仪的全分布式光纤传感系统中,光纤沿途的探测信号含有噪声导致被测量的温度或应变信息难以识别,光谱拟合的精确度对传感信息的识别非常重要。在传感系统低信噪比的情况下,提出了一种提取高精度布里渊散射谱特征的拟合方法,利用小波去噪结合莱文伯-马奈特（LM）算法调节权值后向传输(BP)网络对布里渊散射谱进行特征提取。克服了传统BP神经网络易陷入局部极值的缺点,保证求解的精度。数值仿真表明,该方法适合不同权重比、不同线宽和低信噪比以及大测量范围的情况进行光谱拟合,并且在信噪比为10 dB的情况下得到拟合度均超过0.96。实验结果表明,该方法适用于多种泵浦功率情况下的布里渊散射谱的特征提取,优于传统BP神经网络算法且具有较高的拟合精度。     

A Fault Detection Method for Electrohydraulic Switch Machine Based on Oil-Pressure-Signal-Sectionalized Feature Extraction

A turnout switch machine is key equipment in a railway, and its fault condition has an enormous impact on the safety of train operation. Electrohydraulic switch machines are increasingly used in high-speed railways, and how to extract effective fault features from their working condition monitoring signal is a difficult problem. This paper focuses on the sectionalized feature extraction method of the oil pressure signal of the electrohydraulic switch machine and realizes the fault detection of the switch machine based on this method. First, the oil pressure signal is divided into three stages according to the working principle and action process of the switch machine, and multiple features of each stage are extracted. Then the max-relevance and min-redundancy (mRMR) algorithm is applied to select the effective features. Finally, the mini batch k-means method is used to achieve unsupervised fault diagnosis. Through experimental verification, this method can not only derive the best sectionalization mode and feature types of the oil pressure signal, but also achieve the fault diagnosis and the prediction of the status of the electrohydraulic switch machine.     

An Encryption Algorithm for Region of Interest in Medical DICOM Based on One-Dimensional eλ-cos-cot Map

Today, with the rapid development of the Internet, improving image security becomes more and more important. To improve image encryption efficiency, a novel region of interest (ROI) encryption algorithm based on a chaotic system was proposed. First, a new 1D eλ-cos-cot (1D-ECC) with better chaotic performance than the traditional chaotic system is proposed. Second, the chaotic system is used to generate a plaintext-relate keystream based on the label information of a medical image DICOM (Digital Imaging and Communications in Medicine) file, the medical image is segmented using an adaptive threshold, and the segmented region of interest is encrypted. The encryption process is divided into two stages: scrambling and diffusion. In the scrambling stage, helical scanning and index scrambling are combined to scramble. In the diffusion stage, two-dimensional bi-directional diffusion is adopted, that is, the image is bi-directionally diffused row by column to make image security better. The algorithm offers good encryption speed and security performance, according to simulation results and security analysis.     

薄层色谱-紫外可见分光光度法同时测定食品中的苏丹红Ⅰ～Ⅳ

建立了测定食品中苏丹红色素含量的新方法——薄层色谱-紫外可见分光光度法,对影响测定的因素如样品预处理方式、展开剂等进行了讨论,检测苏丹红Ⅰ~Ⅳ的线性范围分别为0.5~14μg/mL,0.5~10μg/mL,0.5~15μg/mL,0.5~15μg/mL,线性相关系数均为0.999,检出限均为0.05μg/mL。该方法测定结果与国家标准方法测定结果基本一致。     

Established Liposome-Coated IMB16-4 Polymeric Nanoparticles (LNPs) for Increasing Cellular Uptake and Anti-Fibrotic Effects In Vitro

As a global health problem, liver fibrosis still does not have approved treatment. It was proved that N-(3,4,5-trichlorophenyl)-2(3-nitrobenzenesulfonamide) benzamide (IMB16-4) has anti-hepatic fibrosis activity. However, IMB16-4 displays poor water solubility and poor bioavailability. We are devoted to developing biodegraded liposome-coated polymeric nanoparticles (LNPs) as IMB16-4 delivery systems for improving aqueous solubility, cellular uptake, and anti-fibrotic effects. The physical states of IMB16-4−LNPs were analyzed using a transmission electron microscope (TEM), high-performance liquid chromatography (HPLC), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and differential scanning calorimeter (DSC). The results show that IMB16-4−LNPs increased the drug loading compared to liposomes and enhanced cellular uptake behavior compared with IMB16-4−NPs. In addition, IMB16-4−LNPs could repress the expression of hepatic fibrogenesis-associated proteins, indicating that IMB16-4−LNPs exhibited evident anti-fibrotic effects.     

CFD-DEM-VDGM method for simulation of particle fluidization behavior in multi-ring inclined-hole spouted fluidized bed

The simulation of particle fluidization behavior in a complex geometry with a large number of particles is challenging owing to the complexity of unstructured c...