Chemical Reactions and Kinetics of the Carbon Monoxide Coupling in the Presence of

The chemical reactions and kinetics of the catalytic coupling reaction of carbon monoxide to diethyl oxalate were studied in the presence of hydrogen over a supported palladium catalyst in the gaseous phase at the typical coupling reaction conditions. The experiments were performed in a continuous flow fixed-bed reactor. The results indicated that hydrogen only reacts with ethyl nitrite to form ethanol, and kinetic studies revealed that the rate-determining step is the surface reaction of adsorbed hydrogen and the ethoxy radical (EtO-). A kinetic model is proposed and a comparison of the observed and calculated conversions showed that the rate expressions are of rather high confidence.     

离子型溶液聚合化工操作的程序设计

离子型溶液聚合速度方程式一般可写成: r=-dM/dθ=kM~mC~n式中M,C分别代表溶液中单体与催化剂的浓度,m,n是两个动力学参数。为了控制聚合过程或设计适当的反应器,必须考虑体系的动力学特性与传热特性的紧密联系。本文 对恒温下分批式聚合操作的各种实施方案进行了讨论。     

Advanced Current Collectors for Alkali Metal Anodes

High-energy-density batteries are in urgent need to solve the ever-increasing energy storage demand for portable electronic devices, electric vehicles, and renewable solar and wind energy systems. Alkali metals, typically lithium(Li), sodium(Na) and potassium(K), are considered as the promising anode materials owing to their low electrochemical potential, low density, and high theoretical gravimetric capacities. However, the problem of dendrite growth of alkali metals during their plating/stripping process will lead to low Coulombic efficiencies, a short lifespan and huge volume expansion, eventually hindering their practical commercialization. To resolve this issue, a very effective approach is engineering the anodes on structured current collectors. This review summarizes the development of the alkali metal batteries and discusses the recent advances in rational design of anode current collectors. First, the challenges and strategies of suppressing alkali-metal dendrite growth are presented. Then the special attention is paid to the novel current collector design for dendrite-free alkali metal anodes. Finally, we give conclusions and perspective on the current challenges and future research directions toward advanced anode current collectors for alkali metal batteries.     

聚二甲基硅氧烷分子在溶液中的扩张

高分子溶液性质依赖于在溶液中的形态,高分子-良溶剂溶液由于高分子链段与溶剂分子间相互作用使末端矩h~2~(1/2)大于θ-条件下末端矩h_0~2~(1/2),一维扩张因子α以下式表示     

Synthesis and mesomorphic properties of n-butyl-4- [4-((4-n-alkoxyl-tetrafluorophenyl)ethynyl)benzyloxy]benzoates

A homologous series of n-butyl-4-[4-((4-n-alkoxyl-tetrafluorophenyl)ethynyl)benzyloxy]benzoates have been synthesized.Their phase transition temperatures have also measured by polarizing textural observation and confirmed by DSC.     

Ca(1)(-)(x)Na(2)(x)Al(2)B(2)O(7): a structure with tunable density of Na(+) vacancies

A series of samples with the composition Ca(1)(-)(x)Na(2)(x)Al(2)B(2)O(7) (0 < x < or = 1) was investigated and a hexagonal structure with unusually large range of homogeneity (at least from x = 0.01 to 0.95) was revealed. The hexagonal phase consists of [Al(2)B(2)O(7)](infinity)(2)(-) lamellae stacked along the c axis, as in CaAl(2)B(2)O(7) and Na(2)Al(2)B(2)O(7). Nevertheless, the configuration and stacking sequence of the [Al(2)B(2)O(7)](infinity)(2)(-) lamellae are different in these three structures. In the hexagonal structure of Ca(1)(-)(x)()Na(2)(x)()Al(2)B(2)O(7), Ca and half Na cations (Na1) statistically occupy the same crystallographic site which is located between the [Al(2)B(2)O(7)](infinity)(2)(-) lamellae, the other half Na cations (Na2) distribute in the planes bisecting the [Al(2)B(2)O(7)](infinity)(2)(-) lamellae. Depending on the composition, the site occupation factor of Na2 site can vary in the same range as x, leading to a tunable density of Na(+) vacancies in the structure. The AlO(4) tetrahedra and BO(3) triangles in the structure tilt in appropriate ways to improve the bond valence sum of Na2 cations which are not sufficiently bonded to the anions.     

用电子散斑干涉法测量材料热膨胀系数

 利用双光束电子散斑干涉法（ESPI）对试件受热变形进行了实时观测，针对一次实验过程中得到的图片较多（300～500幅）的特点，在图像处理时摒弃了以往的手动识别等位移线的办法，用MATLAB语言编写了批处理程序，能够在采集的大量散斑图片中自动快速准确地标定等位移线，得到相应的位移和应变，并结合实时测量的温度值，获得了45钢和LY12铝合金在不同温升率下的热膨胀系数及其随温度的变化。实验结果表明，在涉及的温升率范围内，温升率的改变对材料热膨胀系数的影响不明显，材料的热膨胀系数随温度的升高略有上升。     

激光通道传输热特性对远场光束质量的影响

 通过仿真计算分析了激光在光束控制系统通道内传输所产生的热效应及其对远场光束质量的影响。激光传播由近轴波方程描述，用快速傅里叶变换技术求解；激光热效应引起的流场密度变化采用完全Navier-Stokes方程计算。计算给出了不同波长、不同吸收系数条件下的远场光斑情况。计算结果表明，在典型的工作条件和状态下，较高能量激光在光束控制系统通道内产生的热效应影响不容忽视，它会明显降低远场目标处的能量集中度，增大光斑的发散。     

脉冲泄流时土壤条件对冲击接地阻抗的影响

 为了探寻电流脉冲泄流时，设备的接地是否有效可靠，用FDTD法分析了脉冲泄流时均一土壤、分层土壤及局部改善土壤的电导率对冲击接地阻抗（TGR）的影响。结果表明：大地电导率对冲击接地阻抗的影响很大；对均一土壤，TGR随大地电导率的增大而减小，大地电导率越大，TGR对接地体的埋深越不敏感。对分层土壤，接地体要埋在大地电导率大的土壤层中，且不要靠近交界面；局部改善大地导电性能对降低TGR效果明显，TGR对改善区域的体积非常敏感，而当电导率大于一定值时，大地电导率的再增加，对TGR的影响不明显。