Spectroscopic studies of bridged binuclear complexes of Co(II), Ni(II), Cu(II) and Zn(II)

Binuclear cobalt(II), nickel(II), copper(II) and zinc(II) complexes of general composition [M₂L^1-2(μ-Cl)Cl₂] · nH₂O with the Schiff-base ligands (where L¹H and L²H are the potential pentadentate ligands derived by condensing 2,6-diformyl-4-methylphenol with 4-amino-3-antipyrine and 2-hydroxy-3-hydrazinoquinoxiline, respectively) have been synthesized and characterized. Analytical and spectral studies support the above formulation. ¹H-NMR and IR spectra of the complexes suggest they have an endogenous phenoxide bridge, with chloride as the exogenous bridge atom. The electronic spectra of all the complexes are well characterized by broad d–d and a high intensity charge-transfer transitions. The complexes are chloro-bridged as evidenced by two intense far-IR bands centered around 270–280 cm⁻¹. Magnetic susceptibility measurements show that complexes are antiferromagnetic in nature. The compounds show significant growth inhibitory activity against fungi Aspergillus niger and Candida albicans and moderate activity against bacteria Bacillus cirroflagellosus and Pseudomonas auresenosa.     

Novel Pb(II), Zn(II), and Cd(II) coordination polymers constructed from ferrocenyl-substituted carboxylate and bipyridine-based ligands

Treatment of two kinds of ferrocenyl-substituted carboxylate ligands (3-ferrocenyl-2-crotonic acid, HOOC-CH=(CH(3))CFc (Fc=(eta(5)-C(5)H(5))Fe(eta(5)-C(5)H(4))) or O-ferrocecarbonyl benzoic acid, o-HOOCC(6)H(4)COFc with Pb(OAc)(2).3H(2)O, Zn(OAc)(2).2H(2)O, or Cd(OAc)(2).2H(2)O) resulted in four novel ferrocene-containing coordination polymers [[Pb(mu(2)-eta(2)-OOCCH=(CH(3))CFc)(2)].MeOH](n) (1), [[Zn(o-OOCC(6)H(4)COFc)(2)(4,4'-bipy)(H(2)O)(2)].2MeOH.2H(2)O](n) (4,4'-bipy = 4,4'-bipyridine) (2), [[Cd(o-OOCC(6)H(4)COFc)(2)(bpe)(MeOH)(2)].2H(2)O](n) (bpe = 1,2-bis(4-pyridyl)ethene) (3), and [Pb(o-OOCC(6)H(4)COFc)(eta(2)-o-OOCC(6)H(4)COFc)(bpe)](n)() (4). Their crystal structures have been characterized by single X-ray determinations. In polymer 1, Pb(II) ions are bridged by tridentate FcC(CH(3))=CHCOO(-) anions, forming an infinite chain [Pb(mu(2)-eta(2)-OOC=CH(CH(3))CFc)(2)](n). In polymers 2-4, there are three kinds of components, metal ions, o-FcCOC(6)H(4)COO(-) units, and organic bridging ligands. The bipyridine-based ligands connect metal ions leading to a one-dimensional chain with o-FcCOC(6)H(4)COO(-) units acting as monodentate or chelate ligands in the side chain. Such coordination polymers containing ferrocenyl-substituted carboxylate and bipyridine-based ligands are very rare. The solution-state differential pulse voltammetries of polymers 1-4 were determined. The results indicate that the half-wave potential of the ferrocenyl moieties is influenced by the Pb(II) ions in polymer 1 and strongly influenced by Zn(II), Cd(II), or Pb(II) ions in polymers 2-4. The thermal properties of the four polymers were also investigated.     

2-Amino-4-bromobutanoic Acid

(2S)- and (2R)-2-Amino-4-bromobutanoic acid were prepared starting from N-Boc-glutamic acid α tert-butyl ester. The double tert-butyl protection was necessary to prevent a partial racemisation during Barton’s radical decarboxylation used to transform the γ-carboxylic group into a bromide. This bromide reacted with different nitrogen, oxygen and sulphur nucleophiles to give nonnatural amino acids characterised by basic or heterocyclic side chains. The title compound was also used to prepare a conformationally constrained peptidomimetic.     

Ca(1)(-)(x)Na(2)(x)Al(2)B(2)O(7): a structure with tunable density of Na(+) vacancies

A series of samples with the composition Ca(1)(-)(x)Na(2)(x)Al(2)B(2)O(7) (0 < x < or = 1) was investigated and a hexagonal structure with unusually large range of homogeneity (at least from x = 0.01 to 0.95) was revealed. The hexagonal phase consists of [Al(2)B(2)O(7)](infinity)(2)(-) lamellae stacked along the c axis, as in CaAl(2)B(2)O(7) and Na(2)Al(2)B(2)O(7). Nevertheless, the configuration and stacking sequence of the [Al(2)B(2)O(7)](infinity)(2)(-) lamellae are different in these three structures. In the hexagonal structure of Ca(1)(-)(x)()Na(2)(x)()Al(2)B(2)O(7), Ca and half Na cations (Na1) statistically occupy the same crystallographic site which is located between the [Al(2)B(2)O(7)](infinity)(2)(-) lamellae, the other half Na cations (Na2) distribute in the planes bisecting the [Al(2)B(2)O(7)](infinity)(2)(-) lamellae. Depending on the composition, the site occupation factor of Na2 site can vary in the same range as x, leading to a tunable density of Na(+) vacancies in the structure. The AlO(4) tetrahedra and BO(3) triangles in the structure tilt in appropriate ways to improve the bond valence sum of Na2 cations which are not sufficiently bonded to the anions.     

Determination of the Dissociation Constants of Urocanic Acid Isomers in Aqueous Solutions

Summary. (E)- and (Z)-Urocanic acids are endogenous chemicals in the normal mammalian skin. The first and the second thermodynamic dissociation constants (pK _a1 and pK _a2) of urocanic acid isomers were determined using UV spectrophotometry in aqueous solutions. The values with standard deviation (pK _a1 = 3.43 ± 0.12 and pK _a2 = 5.80 ± 0.04) and (pK _a1 = 2.7 ± 0.3 and pK _a2 = 6.65 ± 0.04) were obtained to (E)- and (Z)-urocanic acids, respectively. The second dissociations were studied also by potentiometric titration in aqueous sodium chloride solutions up to the isotonic salt concentration (0.154 mol dm⁻³), and the second thermodynamic dissociation constants as well as activity parameters for both isomers were determined at temperature 25°C and for (E)-urocanic acid also at 37°C. The obtained pK _a2 values were close to those found by UV spectrophotometry. The equations for the calculation of the second stoichiometric dissociation constants of urocanic acid isomers on molality and molarity scale in aqueous sodium chloride solutions were derived. The obtained pK _a1 and pK _a2 values for (Z)-urocanic acid appear to be essentially lower than some previously reported values in literature. An erratum to this article is available at .     

Conductivity Studies of <Emphasis Type="Italic">n</Emphasis>-Tetrabutylammonium Tetraphenylborate in 3-Pentanone in the Temperature Range from 283.15 to 329.15 K

The molar conductivities (Λ) of solutions of n-tetrabutylammonium tetraphenylborate (NBu₄BPh₄) in 3-pentanone have been measured in the temperature range from 283.15 to 329.15 K. The conductance data have been analyzed using the Lee-Wheaton conductivity equation with the distance parameter (a) set at Bjerrum’s pairing distance, and the limiting molar conductivities (Λ_o) and the association equilibrium constants (K _A) have been derived. The limiting ion conductivities (λ_±^o) have been evaluated according to the method of Krumgalz. The λ₊ ^o values have been compared with λ₊ ^o values calculated from the empirical equation of Gill. The thermodynamic functions, Gibbs energy (Δ G _A ^o), enthalpy (Δ H _A ^o) and entropy (Δ S _A ^o) for the process of ion-pair formation as well as the activation energy of the ionic movement (ΔH ^∗) have been evaluated. The obtained results are discussed in terms of ion-ion and ion-solvent interactions.     

Quantum wells micro-ring resonator laser emitting at 1746 nm for gas sensing

Gas sensing for measurement of gas components, concentrations, and other parameters plays an important role in many fields. In this Letter, a micro-ring resonator laser used for gas sensing is experimentally demonstrated. The multi-quantumwells micro-ring laser based on whispering-gallery modes with an annular resonator and an output waveguide was fabricated. A single-mode laser with a wavelength of 1746.4 nm was fabricated for the first time, to the best of our knowledge,experimentally. The output power of 1.65 m W under 40 m A injection current was obtained with a side-mode suppression ratio over 33 d B.     

三重四极杆电感耦合等离子体质谱(ICP-MS)法测定氧化铕中13种稀土杂质元素

稀土杂质元素直接影响高纯单金属稀土材料的整体性能,是高科技领域许多材料的重要组成部分。通过考察最佳的消解酸量、温度、时间、氧气反应气流量、稀释气流量,建立了基于三重四极杆电感耦合等离子体质谱仪(ICP-MS/MS)直接测定氧化铕中13种稀土杂质元素分析方法。该方法采用0.1%基体直接进样,可以很大程度提高前处理分析效率。利用碰撞模式测定氧化铕稀土中的Y、La、Pr、Nd、Sm、Gd、Tb、Dy、Ho、Er、Yb、Lu元素,氧气质量转移模式测定氧化铕中的Tm,两种模式结合可以有效去除多原子干扰,实现氧化铕的稳定测试分析。通过对氧化铕标准物质（GBW02902）直接测定分析,结果表明,在碰撞和氧气质量转移模式下,各元素线性相关系数（r）均大于 0.9999,方法检出限为0.001~0.023 mg/kg,测试精密度优于1.99%,13种元素的测试值都在认定值的不确定度范围之内。该分析方法操作简单,测试稳定,效率高,为实验室进行氧化铕材料中REE杂质的准确测试分析提供思路和借鉴。     

Joint Optimization of Control Strategy and Energy Consumption for Energy Harvesting WSAN

With the rapid development of wireless sensor technology, recent progress in wireless sensor and actuator networks (WSANs) with energy harvesting provide the possibility for various real-time applications. Meanwhile, extensive research activities are carried out in the fields of efficient energy allocation and control strategy design. However, the joint design considering physical plant control, energy harvesting, and consumption is rarely concerned in existing works. In this paper, in order to enhance system control stability and promote quality of service for the WSAN energy efficiency, a novel three-step joint optimization algorithm is proposed through control strategy and energy management analysis. First, the optimal sampling interval can be obtained based on energy harvesting, consumption, and remaining conditions. Then, the control gain for each sampling interval is derived by using a backward iteration. Finally, the optimal control strategy is determined as a linear function of the current plant states and previous control strategies. The application of UAV formation flight system demonstrates that better system performance and control stability can be achieved by the proposed joint optimization design for all poor, sufficient, and general energy harvesting scenarios.     

In vivo mechanical study of helical cardiac pacing electrode interacting with canine myocardium

Cardiac pacing is a medical device to help human to overcome arrhythmia and to recover the regular beats of heart. A helical configuration of electrode tip is a new type of cardiac pacing lead distal tip. The helical electrode attaches itself to the desired site of heart by screwing its helical tip into the myocardium. In vivo experiments on anesthetized dogs were carried out to measure the acute interactions between helical electrode and myocardium during screw-in and pull-out processes. These data would be helpful for electrode tip design and electrode/myocardium adherence safety evaluation. They also provide reliability data for clinical site choice of human heart to implant and to fix the pacing lead. A special design of the helical tip using strain gauges is instrumented for the measurement of the screw-in and pull-out forces. We obtained the data of screw-in torques and pull-out forces for five different types of helical electrodes at nine designed sites on ten canine hearts. The results indicate that the screw-in torques increased steplike while the torque–time curves presente saw-tooth fashion. The maximum torque has a range of 0.3–1.9 N mm. Obvious differences are observed for different types of helical tips and for different test sites. Large pull-out forces are frequently obtained at epicardium of left ventricle and right ventricle lateral wall, and the forces obtained at right ventricle apex and outflow tract of right ventricle are normally small. The differences in pull-out forces are dictated by the geometrical configuration of helix and regional structures of heart muscle.