Ultrasound-assisted pseudodigestion for toxic metals determination in fish muscles followed by electrothermal atomic absorption spectrophotometry: multivariate strategy

A simple and efficient procedure for the determination of arsenic (As), cadmium (Cd), and lead (Pb) in the edible parts of freshwater fish by ultrasonic-assisted acid pseudodigestion (USD) was developed. A Plackett-Burman experimental design was used as a multivariate strategy for the evaluation of the effects of several variables at once. Five variables--sonication time, sample mass of muscle tissue, temperature of the ultrasonic bath, mL of nitric acid, and mL of a mixture of acid and oxidant--were regarded as factors. From these studies, certain variables showed up as significant, and they were optimized by a 23+star central composite design, which involved 16 experiments. Optimum values of the variables were selected for the development of USD to determine the contents of As, Cd, and Pb in fish muscles used as pollution bioindicators from Lake Manchar (Sindh, Pakistan). The determination of the 3 toxic metals under study was performed by electrothermal atomic absorption spectrometry. The accuracy of the optimized procedure was evaluated by analysis of certified reference materials BCR 185R bovine liver and by comparison with conventional wet acid digestion methodology. The result obtained by the optimized method showed good agreement with the certified values and sufficiently high recovery. No significant differences were observed for P = 0.05. Relative standard deviation values (average of 10 separate determinations) were 1.21, 5.52, and 5.32% for As, Cd, and Pb, respectively.     

The removal efficiency of chestnut shells for selected pesticides from aqueous solutions

The removal of selected pesticides such as carbofuran (CF) and methyl parathion (MP) using low-cost abundant sorbent chestnut shells from aqueous solutions has been investigated in the present study. The sorption parameters, i.e., contact time, pH, initial pesticide solution concentration and temperature have been studied. Maximum percent sorption (99+/-1%) was achieved for (0.38-3.80) x10(-4) and (0.45-4.5) x10(-4) mol dm(-3) of MP and CF pesticide solutions respectively, using 0.4 g of sorbent in 100 ml of solution for 30 min agitation time at pH 6. The Freundlich, Langmuir and Dubinin-Radushkevich (D-R) models have been applied, and their constants for methyl parathion and carbofuran, sorption intensity 1/n (0.55+/-0.02 and 0.54+/-0.04), multilayer sorption capacity C(m) (28.3+/-0.5 and 16.4+/-0.7) x10(-3) mol l(1-1/n)dm(3/n)g(-1), monolayer sorption capacity Q (22.5+/-0.5 and 10.8+/-0.3) x10(-6) mo lg(-1), binding energy, b (2.9+/-0.2 and 5.2+/-0.5) x10(4) dm(3)mol(-1), and sorption energy E (11.2+/-0.1 and 11.5+/-0.2 kJ mol(-1)) have been evaluated respectively. Lagergren, Morris-Weber and Reichenberg equations were employed to study kinetics of sorption process. Thermodynamic parameters DeltaH (-5.09+/-0.1 and 22.8+/-0.4 kJ mol(-1)), DeltaS (-4.33+/-0.0003 and 0.09+/-0.001 kJ mol(-1)K(-1)) and DeltaG((303K)) (-2.9 and -3.8 kJ mol(-1)) have been calculated for methyl parathion and carbofuran, respectively. The developed sorption procedure has been employed to environmental samples.     

The GC determination of cisplatin as platinum(II) from pharmaceutical preparations and blood sample of cancer patients

Summary A capillary gas chromatographic method is described for the determination of cisplatin based on the complexation of platinum(II) with bis(isovalerylacetone) ethylenediimine (H₂IVA₂en) and extraction in chloroform. The chromatography was carried out on a BP1 or a BP5 column with an FID. Copper(II), nickel (II) and palladium(II) separated completely and did not affect the determination of platinum(II). The method was applied of the determination of cisplatin in a pharmaceutical preparation and blood samples of cancer patients after infusion of cisplatin. The amounts of cisplatin in blood were found to be within 246–283 ng mL⁻¹ with a C.V. of 2.35–4.26%.     

Rheological properties and the interface in polycarbonate/impact modifier blends: Effect of modifier shell molecular weight

Core-shell impact modifiers are used to enhance the impact strength of thermoplastics such as polycarbonate. The shell of the modifier is designed specifically to interact with the matrix polymer because interfacial adhesion between the modifier and matrix is important in improving the impact strength. Several methods have been proposed to study the interactions at the modifier/matrix interface. One measure of this interaction is the strength of lap joints. The degree of interactions at the interface can be characterized as the thickness of the interfacial region where the chains of the two polymers mix. Yet another aspect is related to the effect of interfacial interactions on the dynamic mechanical properties of the blend. Previous studies have shown that the viscoelastic properties of these blends deviate from the emulsion models that have been proposed for such blends. The deviation of the measured viscoelastic behavior of these blends compared to that predicted by the models has been attributed to the formation of network structure of particles in the blend. The formation of the network structure is a consequence of larger effective volumes of the particles due to interactions at the interface with the matrix. This study provides a means of using rheological properties and the emulsion models to estimate the extent of interaction at the modifier/matrix interface. In blends used in this study it can be shown that the interactions between the modifier and matrix extend far beyond the boundary between the two and the estimated effective volume fraction of modifier is much larger than the actual modifier content in the blend. The effective volume fraction is frequency dependent and decreases with increasing frequency. The data suggest that beyond certain frequencies the modifier no longer interacts with the matrix and the system has properties similar to the matrix with holes. The data are presented which indicate that, within the range studied, lower modifier shell molecular weight results in a higher level of interaction with polycarbonate. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1095–1105, 1998     

Evaluation of sorption of uranium onto metakaolin using X-ray photoelectron and Raman spectroscopies

Metakaolin prepared from a natural clay mineral ore of aluminium kaolinite is a promising low cost and high activity aluminosilicate material that has been investigated for studying the sorption behavior of uranium. Here, metakaolin was characterized using X-ray photoelectron spectroscopy (XPS) and the effects of pH, contact time and initial metal ion concentration on its sorption behavior were studied. The sorption process was found to initially be rapid (∼60% at time 0 min) but became slower with time; equilibrium was established within 24 h (∼80% sorption). The data were applied to study the kinetics of the sorption process. The Langmuir and Dubinin-Radushkevich (D-R) sorption isotherms were used to describe partitioning behavior for the system at room temperature. The binding of metal ions was found to be pH dependent, with optimal sorption occurring at pH 5. The retained metal ions were eluted with 5 mL of 0.1 M HNO₃. Raman spectroscopy and XPS were used to evaluate the sorption mechanism of U(VI).     

LESSER KNOWN MIRACLES OF BURGERS EQUATION Dedicated to Professor Constantine M. Dafermos on the occasion of his 70th birthday

This article is a short introduction to the surprising appearance of Burgers equation in some basic probabilistic models.     

Method Development for Determination of Antibiotic Drugs Using Newly Prepared <Emphasis Type="Italic">p</Emphasis>-Morpholinomethylcalix[4]arene Mesoporous Silica-Based HPLC Column

Mesoporous materials are described by their relatively high surface areas and pore volumes. They possess uniform channels within nanometer range. These materials have numerous applications in catalysis, separation and many other fields. The qualitative and quantitative determination of antibiotic drugs, i.e., ciprofloxacin and cefixime has clinical and analytical importance due to their broad spectrum of antimicrobial activity and stability. Both antibiotic drugs are orally active and have excellent activity against different pathogens. It is for the first time that we have developed an analytical method for the simultaneous analyses of both drugs using a newly developed p-morpholinomethylcalix[4]arene (p-MC4) mesoporous silica-based HPLC column (15?×?3 mm I.D.). Furthermore, separation of these two components was carried out using isocratic elution of methanol and 0.1% aqueous formic acid (70:30 v/v) with flow rate of 1 ml min^?1 at retention time of 2.71 and 4.21 min and retention factor 1.85 and 1.19 for ciprofloxacin and cefixime, respectively; while total run time was 5 min. The developed method was repeatable with a relative standard deviation (RSD) of 0.90–2.08% for antibiotic drugs. The limits of detection and quantification of ciprofloxacin and cefixime were obtained within the range of 0.152–0.801 and 0.40–1.23 µg mL^?1, respectively. The method is highly applicable, rapid, simple, very reproducible and accurate for the separation and determination of antibiotic drugs.     

HPLC determination of copper(II), cobalt(II) and iron(II) in pharmaceutical preparations using 2-acetylpyridine-4-phenyl-3-thiosemicarbazone derivatizing agent

Summary Cu(II) Co(II) and Fe(II) in pharmaceutical preparations were determined using precolumn derivatization and solvent extraction with 2-acetylpyridine-4-phenyl-3-thiosemicarbazone (APPT) as complexing reagent. Liquid chromatography (LC) was carried out on a reversed phase C-18, column. The complexes were eluted isocratically with acetonitrile-water containing sodium acetate and tetrabutyl ammonium bromide as ion-pairing agents. The results obtained were compared with those using atomic absorption.     

Schiff base-functionalised styrofoam resin for preconcentration of metal ions in wastewater and wastewater-irrigated vegetables samples

Polystyrene (PS) was extracted from styrofoam waste and functionalised with schiff base, N,N-bis(salicylidene)cyclohexanediamine (SCHD) through an azo spacer. The resin was characterised and used for preconcentration of Pb(II), Ni(II) and Cd(II) ions prior to their trace determinations by microsample injection system–coupled flame atomic absorption spectrometry (MIS-FAAS). The recoveries of studied metal ions were achieved ≥96.0% with relative standard deviation (RSD) ≤4.5 at optimum parameters: pH 8; resin amount 300 mg; flow rates 3.0 mL min^?1 of sample solution; and 2.0 mL min^?1 of eluent (2.0 mol L^?1 HNO₃). The limits of detection (LODs) and limits of quantification (LOQs) were found to be 0.32, 0.23 and 0.21 and 1.10, 0.78 and 0.69 μg L^?1, respectively, with preconcentration factors (PFs) of 500, 800 and 1000, respectively. The linear ranges of the method were 1–40, 1–25 and 1–20 μg L^?1 for Pb(II), Ni(II) and Cd(II) ions, respectively. The accuracy and validation of the method were evaluated by analysis of certified reference materials (CRMs). The method was successfully applied for preconcentration of studied metal ions in wastewater and wastewater-irrigated vegetable samples.