A study of frost growth and densification on flat surfaces

The present study advances a theoretical and experimental investigation of the frost growth and densification on flat surfaces. This study focuses on the most important factors affecting the frost formation process, i.e. the surrounding air temperature, humidity and velocity, and the surface temperature. The processes of frost growth and densification were investigated experimentally in order to provide a physical basis for the development of a theoretical model to predict the variation of the frost layer thickness and mass with time. The mathematical model was based on mass and energy balances within the frost layer, assuming the frost as a porous medium and accounting for the supersaturation of the moist air on the frost surface. The governing equations for mass and heat diffusion were integrated analytically, giving rise to a semi-algebraic formulation which requires numerical integration of only one time dependent ordinary differential equation. When compared with experimental data, the model predictions of the frost thickness as a function of time agreed to within ±10% error bands. The experimentally-validated model was then used to predict the frost layer growth and densification with respect to the operation conditions such as plate surface temperature, air stream temperature, humidity and velocity.     

Prediction of vapor–liquid and liquid–liquid equilibria for polymer systems: Comparison of activity coefficient models

A large number of equations of state and activity coefficient models capable of describing phase equilibria in polymer solutions are available today, but only a few of these models have been applied to different systems. It is therefore useful to investigate the performance of existing thermodynamic models for complex polymer solutions which have not yet been widely studied. The present work studies the application of several activity coefficient models [P.J. Flory, Principles of Polymer Chemistry, Cornell University Press, New York, NY, 1953; T. Oishi, J.M. Prausnitz, Estimation of solvent activities in polymer solutions using a group-contribution method, Ind. Eng. Chem. Process Design Dev. 17 (1978) 333; H.S. Elbro, A. Fredenslund, P. Rasmussen, A new simple equation for the prediction of solvent activities in polymer solutions, Macromolecules 23 (1990) 4707; G.M. Kontogeorgis, A. Fredenslund, D. Tassios, Simple activity coefficient model for the prediction of solvent activities in polymer solutions, Ind. Eng. Chem. Res. 32 (1993) 362; C. Chen, A segment-based local composition model for the Gibbs energy of polymer solutions, Fluid Phase Equilib. 83 (1993) 301; A. Vetere, Rules for predicting vapor–liquid equilibria of amorphous polymer solutions using a modified Flory–Huggins equation, Fluid Phase Equilib. 97 (1994) 43; C. Qian, S.J. Mumby, B.E. Eichinger, Phase diagrams of binary polymer solutions and blends, Macromolecules 24 (1991) 1655; Y.C. Bae, J.J. Shim, D.S. Soane, J.M. Prausnitz, Representation of vapor–liquid and liquid–liquid equilibria for binary systems containing polymers: applicability of an extended Flory–Huggins equation, J. Appl. Polym. Sci. 47 (1993) 1193; G. Bogdanic, J. Vidal, A segmental interaction model for liquid–liquid equilibrium calculations for polymer solutions, Fluid Phase Equilibria 173 (2000) 241] and activity coefficient from equations of state [F. Chen, A. Fredenslund, P. Rasmussen, Group-contribution Flory equation of state for vapor–liquid equilibria en mixtures with polymers, Ind. Eng. Chem. Res. 29 (1990) 875; M.S. High, R.P. Danner, Application of the group contribution lattice—fluids EOS to polymer solutions, AIChE J. 36 (1990) 1625]. The evaluation of these models was carried out both at infinite dilution and at finite concentrations and the results compared to experimental data. Furthermore, liquid–liquid equilibrium predictions for binary polymer solutions using six activity coefficient models are compared in this work. The parameters were estimated for all the models to achieve the best possible representation of the reported experimental equilibrium behavior.     

Photodegradation of the pharmaceuticals amoxicillin, bezafibrate and paracetamol by the photo-Fenton process—Application to sewage treatment plant effluent

Photodegradation of the pharmaceuticals amoxicillin (AMX), bezafibrate (BZF) and paracetamol (PCT) in aqueous solutions via the photo-Fenton process was investigated under black-light and solar irradiation. The influences of iron source, initial H₂O₂ concentration and matrix (distilled water and sewage treatment plant effluent) on degradation efficiency were discussed in detail. The results showed that (i) the degradation of the drugs was favored in the presence of potassium ferrioxalate (FeOx) in comparison to Fe(NO₃)₃; (ii) the increase of the H₂O₂ concentration improved the efficiency of AMX and BZF oxidation; however, the same was not observed for PCT; (iii) the influence of the matrix was observed for the degradation of BZF and PCT; (iv) under solar irradiation, the oxidation of the BZF and PCT is faster than under black-light irradiation. All these pharmaceuticals can be efficiently degraded employing the process evaluated.     

Electrical conductivity in very anisotropic conductors and semiconductors

Summary For very anisotropic metallic and semiconducting systems it is shown that the electrical conductivity in the direction of high effective mass decreases as the number of electrons in the conduction band grows. In the other directions the conductivity behaves normally.

---

Riassunto Si mostra che, per sistemi semiconduttori e metallici anisotropi, la conduttività elettrica nella direzione di massa altamente efficace diminuisce all'aumentare del numero di elettroni nella banda di conduzione. Nelle altre direzioni la conduttività si comporta normalmente.

---

Резюме Для очень анизотропных металлических и полупроводниковых систем показывается, что электропропроводность в направлении большой эффективной массы уменьшается, когда число электронов в зоне проводимости увеличивается. В других направлениях проводимость ведет себя нормальным образом.

     

Effectiveness of Photodynamic Therapy in Elimination of HPV‐16 and HPV‐18 Associated with CIN I in Mexican Women

This study aimed to determine the effectiveness of photodynamic therapy (PDT), using δ‐aminolevulinic acid (5‐ALA), in the elimination of premalignant cervical lesions in Mexican patients with human papillomavirus (HPV) infection and/or cervical intraepithelial neoplasia (CIN). Thirty women diagnosed with CIN I and/or positive for HPV participated in the study. Topical 6% 5‐ALA in gel form was applied to the uterine cervix; after 4 h, the lesion area was irradiated with a light dose of 200 J cm^?2 at 635 nm. This procedure was performed three times at 48‐h intervals. Clinical follow‐up was performed at 3, 6, and 12 months after the initial PDT administration, by colposcopy, cervical cytology, histopathological analysis, polymerase chain reaction, and hybrid capture. Of HPV‐infected patients without evidence of CIN I, 80% cleared the infection, while HPV associated with CIN I was eliminated in 83% of patients (P < 0.05). At 12 months, CIN I had regressed in 57% of patients, although this response was not statistically significant. PDT using 6% 5‐ALA is concluded to be effective in eliminating HPV infection associated or not with CIN I.     

Sensitive Determination of the Diquat Herbicide in Fresh Food Samples on a Highly Boron‐Doped Diamond Electrode

The highly boron‐doped diamond electrode (HBDD) combined with square wave voltammetry (SWV) was used in the development of an analytical procedure for diquat determination in potato and sugar cane samples and lemon, orange, tangerine and pineapple juices. Preliminary experiments realised in a medium of 0.05 mol L^?1 Na₂B₄O₇ showed the presence of two voltammetric peaks around ?0.6 V and around ?1.0 V vs. Ag/AgCl/Cl^? 3.0 mol L^?1, where the first peak could be successfully used for analytical proposes due the facility in the electrode surface renovation. After the experimental and voltammetric optimisation, the calculated detection and quantification limits were 1.6×10^?10 mol L^?1 and 5.3×10^?10 mol L^?1 (0.057 µg L^?1 and 0.192 µg L^?1, respectively), which are lower than the maximum residue limit established for fresh food samples by the Brazilian Sanitary Vigilance Agency. The proposed methodology was used to determine diquat residues in potato and sugar cane samples and lemon, orange, tangerine and pineapple juices and the calculated recovery efficiencies indicated that the proposed procedure presents higher robustness, stability and sensitivity, good reproducibility, and is very adequate for diquat determination in complex samples.     

Antiproliferative activity, antioxidant capacity and tannin content in plants of semi-arid northeastern Brazil

The objective of this study was to evaluate antiproliferative activity, antioxidant capacity and tannin content in plants from semi-arid northeastern Brazil (Caatinga). For this study, we selected 14 species and we assayed the methanol extracts for antiproliferative activity against the HEp-2 (laryngeal cancer) and NCI-H292 (lung cancer) cell lines using the (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazole) (MTT) method. In addition, the antioxidant activity was evaluated with the DPPH (2,2-diphenyl-2-picrylhydrazyl) assay, and the tannin content was determined by the radial diffusion method. Plants with better antioxidant activity (expressed in a dose able to decrease the initial DPPH concentration by 50%, or IC50) and with higher levels of tannins were: Poincianella pyramidalis (42.95±1.77 μg/mL IC50 and 8.17±0.64 tannin content), Jatropha mollissima (54.09±4.36μg/mL IC50 and 2.35±0.08 tannin content) and Anadenanthera colubrina (73.24±1.47 μg/mL IC50 and 4.41±0.47 tannin content). Plants with enhanced antiproliferative activity (% living cells) were Annona muricata (24.94±0.74 in NCI-H292), Lantana camara (25.8±0.19 in NCI-H292), Handroanthus impetiginosus (41.8±0.47 in NCI-H292) and Mentzelia aspera (45.61±1.94 in HEp-2). For species with better antioxidant and antiproliferative activities, we suggest future in vitro and in vivo comparative studies with other pharmacological models, and to start a process of purification and identification of the possible molecule(s) responsible for the observed pharmacological activity. We believe that the flora of Brazilian semi-arid areas can be a valuable source of plants rich in tannins, cytotoxic compounds and antioxidant agents.     

Characterization of the Excited States of Indigo Derivatives in their Reduced Forms

A comprehensive characterization of the electronic spectral and photophysical properties of the leuco (reduced) form of several indigo derivatives, including indigo and Tyrian Purple, with di‐, tetra‐, and hexa‐substitution, was obtained in solution. The characterization involves absorption, fluorescence, and triplet–triplet absorption spectra, together with quantitative measurements of quantum yields of fluorescence, ?_F (0.46–0.04), intersystem crossing, ?_T (0.013–0.034), internal conversion, ?_IC, and the corresponding lifetimes. The position and degree of substitution promote differences in the spectral and photophysical properties displayed by the investigated leuco derivatives. The ?_F values are about two orders of magnitude higher than those previously obtained for the corresponding keto forms. Also in contrast with the behavior found for the keto forms, the S₁～～→T₁ intersystem crossing is an efficient route for the excited‐state deactivation channel. These findings strengthen the fact that, in contrast to keto indigo where the internal conversion dominates the deactivation of the excited‐state, with leuco indigo (and derivatives), the excited state deactivation involves competition between internal conversion, triplet state formation, and fluorescence. A time‐resolved investigation of one of the compounds in glycerol showed the presence of a photoisomerization process.     

Quantification of endocrine disruptors and pesticides in water by gas chromatography–tandem mass spectrometry. Method validation using weighted linear regression schemes

A multi-residue methodology based on a solid phase extraction followed by gas chromatography–tandem mass spectrometry was developed for trace analysis of 32 compounds in water matrices, including estrogens and several pesticides from different chemical families, some of them with endocrine disrupting properties. Matrix standard calibration solutions were prepared by adding known amounts of the analytes to a residue-free sample to compensate matrix-induced chromatographic response enhancement observed for certain pesticides. Validation was done mainly according to the International Conference on Harmonisation recommendations, as well as some European and American validation guidelines with specifications for pesticides analysis and/or GC–MS methodology. As the assumption of homoscedasticity was not met for analytical data, weighted least squares linear regression procedure was applied as a simple and effective way to counteract the greater influence of the greater concentrations on the fitted regression line, improving accuracy at the lower end of the calibration curve. The method was considered validated for 31 compounds after consistent evaluation of the key analytical parameters: specificity, linearity, limit of detection and quantification, range, precision, accuracy, extraction efficiency, stability and robustness.     

A heuristic algorithm based on multi-assignment procedures for nurse scheduling

This paper tackles a Nurse Scheduling Problem which consists of generating work schedules for a set of nurses while considering their shift preferences and other requirements. The objective is to maximize the satisfaction of nurses’ preferences and minimize the violation of soft constraints. This paper presents a new deterministic heuristic algorithm, called MAPA (multi-assignment problem-based algorithm), which is based on successive resolutions of the assignment problem. The algorithm has two phases: a constructive phase and an improvement phase. The constructive phase builds a full schedule by solving successive assignment problems, one for each day in the planning period. The improvement phase uses a couple of procedures that re-solve assignment problems to produce a better schedule. Given the deterministic nature of this algorithm, the same schedule is obtained each time that the algorithm is applied to the same problem instance. The performance of MAPA is benchmarked against published results for almost 250,000 instances from the NSPLib dataset. In most cases, particularly on large instances of the problem, the results produced by MAPA are better when compared to best-known solutions from the literature. The experiments reported here also show that the MAPA algorithm finds more feasible solutions compared with other algorithms in the literature, which suggest that this proposed approach is effective and robust.