Poly(vinyl acetate) paints in works of art: A photochemical approach. Part 1

The photochemistry of poly(vinyl acetate), PVAc, homopolymer, of PVAc mixtures with selected pigments and fillers, and of accurate historic reproductions based on the colours prepared by Portuguese artist Joaquim Rodrigo and on those supplied by the company A Favrel was studied. The systems, applied as films, were irradiated at λ ≥ 300 nm and the changes followed by size exclusion chromatography, infrared spectroscopy, and colorimetry.PVAc as homopolymer or as an emulsion paint proved to be very stable to light, and after 5000 h of irradiation no gel fraction was observed. Φ_R (λ_irr = 313 nm) for chain scission for PVAc was determined to be 7 × 10⁻⁸. This value indicates that the mechanism/s operating when irradiating at λ ≥ 300 nm are different from those previously published with irradiation involving 254 nm. No side-group scission was observed, and main chain scission is the foremost photodegradation mechanism. Also, the metal ions present in the pigments do not affect the photochemical stability of the polymer.     

Inverse photoinduced electron transfer in large betaine molecules

We have used ab initio methods to confirm the existence of an inversion in the photoinduced intramolecular electron transfer in large conjugated pyridinium betaines, by examining compounds where an imidazole ring and a pyridinic group are connected by polyenic chains of increasing size. As these intermediary conjugated bridges get longer, an unusual net charge transfer is observed. The conjugated chain becomes a channel for the photoinduced electronic density flow, and the amount of charge at the donor and acceptor groups is reduced, while an inversion in the spatial localization of the frontier orbitals occurs. We discuss the corresponding implications on the nonlinear optical, photochemical and solvatochromic properties of these molecules.     

Non-separating cocircuits in matroids

In this note, we obtain a lower bound for the number of connected hyperplanes of a 3-connected binary matroid M containing a fixed set A provided M|A is coloopless.     

A study of frost growth and densification on flat surfaces

The present study advances a theoretical and experimental investigation of the frost growth and densification on flat surfaces. This study focuses on the most important factors affecting the frost formation process, i.e. the surrounding air temperature, humidity and velocity, and the surface temperature. The processes of frost growth and densification were investigated experimentally in order to provide a physical basis for the development of a theoretical model to predict the variation of the frost layer thickness and mass with time. The mathematical model was based on mass and energy balances within the frost layer, assuming the frost as a porous medium and accounting for the supersaturation of the moist air on the frost surface. The governing equations for mass and heat diffusion were integrated analytically, giving rise to a semi-algebraic formulation which requires numerical integration of only one time dependent ordinary differential equation. When compared with experimental data, the model predictions of the frost thickness as a function of time agreed to within ±10% error bands. The experimentally-validated model was then used to predict the frost layer growth and densification with respect to the operation conditions such as plate surface temperature, air stream temperature, humidity and velocity.     

Prediction of vapor–liquid and liquid–liquid equilibria for polymer systems: Comparison of activity coefficient models

A large number of equations of state and activity coefficient models capable of describing phase equilibria in polymer solutions are available today, but only a few of these models have been applied to different systems. It is therefore useful to investigate the performance of existing thermodynamic models for complex polymer solutions which have not yet been widely studied. The present work studies the application of several activity coefficient models [P.J. Flory, Principles of Polymer Chemistry, Cornell University Press, New York, NY, 1953; T. Oishi, J.M. Prausnitz, Estimation of solvent activities in polymer solutions using a group-contribution method, Ind. Eng. Chem. Process Design Dev. 17 (1978) 333; H.S. Elbro, A. Fredenslund, P. Rasmussen, A new simple equation for the prediction of solvent activities in polymer solutions, Macromolecules 23 (1990) 4707; G.M. Kontogeorgis, A. Fredenslund, D. Tassios, Simple activity coefficient model for the prediction of solvent activities in polymer solutions, Ind. Eng. Chem. Res. 32 (1993) 362; C. Chen, A segment-based local composition model for the Gibbs energy of polymer solutions, Fluid Phase Equilib. 83 (1993) 301; A. Vetere, Rules for predicting vapor–liquid equilibria of amorphous polymer solutions using a modified Flory–Huggins equation, Fluid Phase Equilib. 97 (1994) 43; C. Qian, S.J. Mumby, B.E. Eichinger, Phase diagrams of binary polymer solutions and blends, Macromolecules 24 (1991) 1655; Y.C. Bae, J.J. Shim, D.S. Soane, J.M. Prausnitz, Representation of vapor–liquid and liquid–liquid equilibria for binary systems containing polymers: applicability of an extended Flory–Huggins equation, J. Appl. Polym. Sci. 47 (1993) 1193; G. Bogdanic, J. Vidal, A segmental interaction model for liquid–liquid equilibrium calculations for polymer solutions, Fluid Phase Equilibria 173 (2000) 241] and activity coefficient from equations of state [F. Chen, A. Fredenslund, P. Rasmussen, Group-contribution Flory equation of state for vapor–liquid equilibria en mixtures with polymers, Ind. Eng. Chem. Res. 29 (1990) 875; M.S. High, R.P. Danner, Application of the group contribution lattice—fluids EOS to polymer solutions, AIChE J. 36 (1990) 1625]. The evaluation of these models was carried out both at infinite dilution and at finite concentrations and the results compared to experimental data. Furthermore, liquid–liquid equilibrium predictions for binary polymer solutions using six activity coefficient models are compared in this work. The parameters were estimated for all the models to achieve the best possible representation of the reported experimental equilibrium behavior.     

Photodegradation of the pharmaceuticals amoxicillin, bezafibrate and paracetamol by the photo-Fenton process—Application to sewage treatment plant effluent

Photodegradation of the pharmaceuticals amoxicillin (AMX), bezafibrate (BZF) and paracetamol (PCT) in aqueous solutions via the photo-Fenton process was investigated under black-light and solar irradiation. The influences of iron source, initial H₂O₂ concentration and matrix (distilled water and sewage treatment plant effluent) on degradation efficiency were discussed in detail. The results showed that (i) the degradation of the drugs was favored in the presence of potassium ferrioxalate (FeOx) in comparison to Fe(NO₃)₃; (ii) the increase of the H₂O₂ concentration improved the efficiency of AMX and BZF oxidation; however, the same was not observed for PCT; (iii) the influence of the matrix was observed for the degradation of BZF and PCT; (iv) under solar irradiation, the oxidation of the BZF and PCT is faster than under black-light irradiation. All these pharmaceuticals can be efficiently degraded employing the process evaluated.     

Electrical conductivity in very anisotropic conductors and semiconductors

Summary For very anisotropic metallic and semiconducting systems it is shown that the electrical conductivity in the direction of high effective mass decreases as the number of electrons in the conduction band grows. In the other directions the conductivity behaves normally.

---

Riassunto Si mostra che, per sistemi semiconduttori e metallici anisotropi, la conduttività elettrica nella direzione di massa altamente efficace diminuisce all'aumentare del numero di elettroni nella banda di conduzione. Nelle altre direzioni la conduttività si comporta normalmente.

---

Резюме Для очень анизотропных металлических и полупроводниковых систем показывается, что электропропроводность в направлении большой эффективной массы уменьшается, когда число электронов в зоне проводимости увеличивается. В других направлениях проводимость ведет себя нормальным образом.

     

Effectiveness of Photodynamic Therapy in Elimination of HPV‐16 and HPV‐18 Associated with CIN I in Mexican Women

This study aimed to determine the effectiveness of photodynamic therapy (PDT), using δ‐aminolevulinic acid (5‐ALA), in the elimination of premalignant cervical lesions in Mexican patients with human papillomavirus (HPV) infection and/or cervical intraepithelial neoplasia (CIN). Thirty women diagnosed with CIN I and/or positive for HPV participated in the study. Topical 6% 5‐ALA in gel form was applied to the uterine cervix; after 4 h, the lesion area was irradiated with a light dose of 200 J cm^?2 at 635 nm. This procedure was performed three times at 48‐h intervals. Clinical follow‐up was performed at 3, 6, and 12 months after the initial PDT administration, by colposcopy, cervical cytology, histopathological analysis, polymerase chain reaction, and hybrid capture. Of HPV‐infected patients without evidence of CIN I, 80% cleared the infection, while HPV associated with CIN I was eliminated in 83% of patients (P < 0.05). At 12 months, CIN I had regressed in 57% of patients, although this response was not statistically significant. PDT using 6% 5‐ALA is concluded to be effective in eliminating HPV infection associated or not with CIN I.     

Sensitive Determination of the Diquat Herbicide in Fresh Food Samples on a Highly Boron‐Doped Diamond Electrode

The highly boron‐doped diamond electrode (HBDD) combined with square wave voltammetry (SWV) was used in the development of an analytical procedure for diquat determination in potato and sugar cane samples and lemon, orange, tangerine and pineapple juices. Preliminary experiments realised in a medium of 0.05 mol L^?1 Na₂B₄O₇ showed the presence of two voltammetric peaks around ?0.6 V and around ?1.0 V vs. Ag/AgCl/Cl^? 3.0 mol L^?1, where the first peak could be successfully used for analytical proposes due the facility in the electrode surface renovation. After the experimental and voltammetric optimisation, the calculated detection and quantification limits were 1.6×10^?10 mol L^?1 and 5.3×10^?10 mol L^?1 (0.057 µg L^?1 and 0.192 µg L^?1, respectively), which are lower than the maximum residue limit established for fresh food samples by the Brazilian Sanitary Vigilance Agency. The proposed methodology was used to determine diquat residues in potato and sugar cane samples and lemon, orange, tangerine and pineapple juices and the calculated recovery efficiencies indicated that the proposed procedure presents higher robustness, stability and sensitivity, good reproducibility, and is very adequate for diquat determination in complex samples.