Effects of Photobiomodulation on Root Resorption Induced by Orthodontic Tooth Movement and RANKL/OPG Expression in Rats

The aim of this study was to evaluate the effects of photobiomodulation on the repair of induced root resorption (RR) after orthodontic tooth movement. Twenty male rats were used in this study. Forty right and left upper first molars were evaluated and divided into four groups (n = 10): negative control group (NC), no tooth movement or irradiation; positive control group (PC), induced tooth movement and root resorption; conventional treatment group (CT), force was removed after 7 days; and photobiomodulation group (PBM) after force removal molars were irradiated every 48 h for 7 days using GaAlAs diode laser (810 nm). Energy per point was 1.5 J (100 mW, 15 s, 75 J cm^?2). NC and PC were euthanized on day 7; CT and PBM on day 14. Histomorphometric and immunohistochemsitry analyses showed increase in area of root resorption in all groups (P < 0.05) compared to NC. RR lacunae were larger in CT compared to PC and PBM at the compression side of the distal root. OPG was higher in PBM group (P < 0.05). PBM group showed low expression of RANKL compared to PC and CT on the tension side. PBM can potentially affect RR progression by increasing OPG expression in the compression area and decreasing number of clastic cells in the root surface.     

Photooxidation of glycated and non‐glycated phosphatidylethanolamines monitored by mass spectrometry

Phosphatidylethanolamines (PE) are one of the major components of cells membranes, namely in skin and in retina, that are continuously exposed to solar UV radiation being major targets of photooxidation damage. In addition, due to the presence of the free amine group, PE can also undergo glycation, in hyperglycemic conditions which may increase the susceptibility to oxidation. The aim of this study is to develop a model, based on mass spectrometry (MS) analysis, to identify photooxidative degradation of selected PE (POPE: PE 16:0/18:1, PLPE: PE 16:0/18:2, PAPE: PE 16:0/20:4) and glycated PEs due to UV irradiation. Photooxidation products were analysed by electrospray ionization MS (ESI‐MS) and tandem MS (ESI‐MS/MS) in positive and negative mode. Emphasis is placed in the influence of glycation in the generation of distinct photooxidation products. ESI‐MS spectra of PE after UV photo‐irradiation showed mainly hydroperoxy derivatives, due to oxidation of unsaturated fatty acyl chains. Glycated PE gave rise to several new photooxidation products formed due to oxidative cleavages of the glucose moiety, namely between C1 and C2, C2 and C3, and C5 and C6 of this sugar unit. These new products were identified by ESI‐MS/MS in positive mode showing distinct neutral loss depending on the different structure of the polar head group. These new identified advanced glycated photooxidation products may have a deleterious role in the etiology of diabetic retinopathy and in diabetic retinal microvascular complications. Copyright © 2013 John Wiley & Sons, Ltd.     

The Crucial Role of Sb2F10 in the Chemical Synthesis of F2

The purely chemical synthesis of fluorine is a spectacular reaction which for more than a century had been believed to be impossible. In 1986, it was finally experimentally achieved, but since then this important reaction has not been further studied and its detailed mechanism had been a mystery. The known thermal stability of MnF₄ casts serious doubts on the originally proposed hypothesis that MnF₄ is thermodynamically unstable and decomposes spontaneously to a lower manganese fluoride and F₂. This apparent discrepancy has now been resolved experimentally and by electronic structure calculations. It is shown that the reductive elimination of F₂ requires a large excess of SbF₅ and occurs in the last reaction step when in the intermediate [SbF₆][MnF₂][Sb₂F₁₁] the addition of one more SbF₅ molecule to the [SbF₆]⁻ anion generates a second tridentate [Sb₂F₁₁]⁻ anion. The two tridentate [Sb₂F₁₁]⁻ anions then provide six fluorine bridges to the Mn atom thereby facilitating the reductive elimination of the two fluorine ligands as F₂.     

Tuning the magnetic and electric behavior of lithium ferrite using an eco-friendly pectin sol-gel route

Journal of Sol-Gel Science and Technology - Lithium ferrite (LiFe5O8) in the cubic crystal system is a very important and versatile material for several technological applications as it possesses...     

Relevance of gaseous flows in electrochemically assisted soil thermal remediation

Treatment of polluted soil is one of the priorities in the search of a more sustainable planet. Electrochemically assisted soil remediation has been considered a good option for removing organic contaminants contained in soil, including the removal of volatile organic compounds, associated with gaseous streams produced during the treatment. Also, recently, electrochemical gas treatment technologies have been appointed as promising for the treatment of volatile organic compounds. In this work, we review the current opinion about the most recent studies in both areas. The first section focuses on the production of gaseous compounds during soil remediation by conventional and electrochemical systems. The second section describes the recent progress in the integration of adsorption and absorption with electrochemical processes. Finally, we discuss the holistic application of assisted electrochemical technologies in soil remediation, considering also emerging processes recently published in the literature.     

Effects of Adsorbed Polyaniline on Redox Process on MoO3 Surface

The effects exhibited by adsorbed conducting polyaniline on the redox process on a molybdenum oxide surface were studied. Thermogravimetric results indicate a 4% polyaniline deposition. Cyclic voltammograms of the adsorbed polymer on MoO3 show that polyaniline exerts remarkable effects on the molybdenum blue oxidation-reduction process, with oxidation and reduction potentials of 0.33 and 0.18 V, respectively. This effect strongly enhances the electrode response, and can be used as an important tool in qualitative and/or quantitative determinations of molybdenum in solution as well as in any substrate. Copyright 1999 Academic Press.     

Optimization and characterization of a biosensor assembly for detection of <Emphasis Type="Italic">Salmonella</Emphasis> Typhimurium

The performance of biosensors depends directly on the strategies adopted during their development. In this paper, a fast and sensitive biosensor for Salmonella Typhimurium detection was assembled by using optimization studies in separate stages. The pre-treatment assays, biomolecular immobilization (primary antibody and protein A concentrations), and analytical response (hydroquinone and hydrogen peroxide concentrations) were optimized via voltammetric methods. In the biosensor assembly, a gold surface was modified via the self-assembled monolayer technique (SAM) using cysteamine thiol and protein A for immobilization of anti-Salmonella antibody. The analytical response of the biosensor was obtained through the use of a secondary antibody labeled with a peroxidase enzyme, and the signal was evaluated by applying the chronoamperometry technique. The biosensor was characterized by infrared spectroscopy and cyclic voltammetry. Optimization of protein A and primary antibody concentrations enabled higher analytical signals of 7.5 and 75 mg mL^?1, respectively, to be achieved. The hydroquinone and H₂O₂ concentrations selected were 3 and 300 mM, respectively. The biosensor developed attained a very low detection limit of 10 CFU mL^?1 and a fast response with a final detection time of 125 min. These results indicate that this biosensor is very promising for the food safety and emergency response applications.     

The search for a new model structure of β-Factor XIIa

We present the search for a new model of -factor XIIa, a blood coagulation enzyme, with an unknown experimental 3D-structure. We decided to build not one but three different models using different homologous proteins as well as different techniques and different modellers. Additional studies, including extensive molecular dynamics simulations on the solvated state, allowed us to draw several conclusions concerning homology modelling, in general, and -factor XIIa, in particular.     

Effectiveness of Photodynamic Therapy in Elimination of HPV‐16 and HPV‐18 Associated with CIN I in Mexican Women

This study aimed to determine the effectiveness of photodynamic therapy (PDT), using δ‐aminolevulinic acid (5‐ALA), in the elimination of premalignant cervical lesions in Mexican patients with human papillomavirus (HPV) infection and/or cervical intraepithelial neoplasia (CIN). Thirty women diagnosed with CIN I and/or positive for HPV participated in the study. Topical 6% 5‐ALA in gel form was applied to the uterine cervix; after 4 h, the lesion area was irradiated with a light dose of 200 J cm^?2 at 635 nm. This procedure was performed three times at 48‐h intervals. Clinical follow‐up was performed at 3, 6, and 12 months after the initial PDT administration, by colposcopy, cervical cytology, histopathological analysis, polymerase chain reaction, and hybrid capture. Of HPV‐infected patients without evidence of CIN I, 80% cleared the infection, while HPV associated with CIN I was eliminated in 83% of patients (P < 0.05). At 12 months, CIN I had regressed in 57% of patients, although this response was not statistically significant. PDT using 6% 5‐ALA is concluded to be effective in eliminating HPV infection associated or not with CIN I.     

An efficient heuristic approach for a multi-period logistics network redesign problem

In this paper, a multi-period logistics network redesign problem arising in the context of strategic supply chain planning is studied. Several aspects of practical relevance are captured, namely, multiple echelons with different types of facilities, product flows between facilities in the same echelon, direct shipments to customers, and facility relocation. A two-phase heuristic approach is proposed to obtain high-quality feasible solutions to the problem, which is initially modeled as a large-scale mixed-integer linear program. In the first phase of the heuristic, a linear programming rounding strategy is applied to find initial values for the binary location variables. The second phase of the heuristic uses local search to correct the initial variable choices when a feasible solution is not identified, or to improve the initial feasible solution when its quality does not meet given criteria. The results of a computational study are reported for randomly generated instances comprising a variety of logistics networks.