Simulation of Organic Liquid Product Deoxygenation through Multistage Countercurrent Absorber/Stripping Using CO2 as Solvent with Aspen-HYSYS: Process Modeling and Simulation

In this work, the deoxygenation of organic liquid products (OLP) obtained through the thermal catalytic cracking of palm oil at 450 °C, 1.0 atmosphere, with 10% (wt.) Na₂CO₃ as a catalyst, in multistage countercurrent absorber columns using supercritical carbon dioxide (SC-CO₂) as a solvent, with an Aspen-HYSYS process simulator, was systematically investigated. In a previous study, the thermodynamic data basis and EOS modeling necessary to simulate the deoxygenation of OLP was presented. This work addresses a new flowsheet, consisting of 03 absorber columns, 10 expansions valves, 10 flash drums, 08 heat exchanges, 01 pressure pump, and 02 make-ups of CO₂, aiming to improve the deacidification of OLP. The simulation was performed at 333 K, 140 bar, and (S/F) = 17; 350 K, 140 bar, and (S/F) = 38; 333 K, 140 bar, and (S/F) = 25. The simulation shows that 81.49% of OLP could be recovered and that the concentrations of hydrocarbons in the extracts of absorber-01 and absorber-02 were 96.95 and 92.78% (wt.) on a solvent-free basis, while the bottom stream of absorber-03 was enriched in oxygenated compounds with concentrations of up to 32.66% (wt.) on a solvent-free basis, showing that the organic liquid products (OLP) were deacidified and SC-CO₂ was able to deacidify the OLP and obtain fractions with lower olefin contents. The best deacidifying condition was obtained at 333 K, 140 bar, and (S/F) = 17.     

Least-squares support vector machines and near infrared spectroscopy for quantification of common adulterants in powdered milk

This paper proposes the use of the least-squares support vector machine (LS-SVM) as an alternative multivariate calibration method for the simultaneous quantification of some common adulterants (starch, whey or sucrose) found in powdered milk samples, using near-infrared spectroscopy with direct measurements by diffuse reflectance. Due to the spectral differences of the three adulterants a nonlinear behavior is present when all groups of adulterants are in the same data set, making the use of linear methods such as partial least squares regression (PLSR) difficult. Excellent models were built using LS-SVM, with low prediction errors and superior performance in relation to PLSR. These results show it possible to built robust models to quantify some common adulterants in powdered milk using near-infrared spectroscopy and LS-SVM as a nonlinear multivariate calibration procedure.     

Direct observation of electron-to-hole energy transfer in CdSe quantum dots

We independently determine the subpicosecond cooling rates for holes and electrons in CdSe quantum dots. Time-resolved luminescence and terahertz spectroscopy reveal that the rate of hole cooling, following photoexcitation of the quantum dots, depends critically on the electron excess energy. This constitutes the first direct, quantitative measurement of electron-to-hole energy transfer, the hypothesis behind the Auger cooling mechanism proposed in quantum dots, which is found to occur on a 1 +/- 0.15 ps time scale.     

Transport of waves in disordered waveguides: A potential model

We study the statistical properties of wave transport in a disordered waveguide. We first derive the properties of a “building block” (BB) of length δL starting from a potential model consisting of thin potential slices. We then find a diffusion equation—in the space of transfer matrices that describe our system—which governs the evolution with the length L of the disordered waveguide of the transport properties of interest. The latter depend only on the mean free paths and on no other property of the slice distribution. The universality that arises demonstrates the existence of a generalized central-limit theorem. We have developed a numerical simulation in which the universal statistical properties of the BB found analytically are first implemented numerically, and then the various BBs are combined to construct the full waveguide. The reported results thus obtained are in good agreement with microscopic calculations, for both bulk and surface disorder.     

Numerical simulation of two-dimensional Bingham fluid flow by semismooth Newton methods

This paper is devoted to the numerical simulation of two-dimensional stationary Bingham fluid flow by semismooth Newton methods. We analyze the modeling variational inequality of the second kind, considering both Dirichlet and stress-free boundary conditions. A family of Tikhonov regularized problems is proposed and the convergence of the regularized solutions to the original one is verified. By using Fenchel’s duality, optimality systems which characterize the original and regularized solutions are obtained. The regularized optimality systems are discretized using a finite element method with (cross-grid P₁)-Q₀ elements for the velocity and pressure, respectively. A semismooth Newton algorithm is proposed in order to solve the discretized optimality systems. Using an additional relaxation, a descent direction is constructed from each semismooth Newton iteration. Local superlinear convergence of the method is also proved. Finally, we perform numerical experiments in order to investigate the behavior and efficiency of the method.     

Mass‐Spectrometric Observation of Counter Anion Production in SU‐8 Exposed to UV Light and its Use for Dill C Parameter Determination

Photopolymerization is a phenomenon that is the basis of much of today's microfabrication technology and intense research is conducted to improve its control and the characteristics of end products for a variety of applications. The design of microscopic structures often relies on the accurate knowledge and modeling of photopolymer's behavior upon exposure, i.e. the Dill parameters, for each radiation species of interest and therefore the development of flexible characterization techniques is of great importance. SU‐8 is a popular compound that is representative of a whole class that relies on cationic polymerization, where an acid is obtained via photolysis of an onium salt during exposure. Here we report on the observation of SbF₆^? via laser desorption mass spectrometry on SU‐8 exposed to UV light at the wavelength of 365 nm and demonstrate that the yield of this counter‐anion as a function of exposure is consistent with the Dill C parameter value available in the literature. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 967–972     

Development of a Neutral Diketopyrrolopyrrole Phosphine Oxide for the Selective Bioimaging of Mitochondria at the Nanomolar Level

Development of novel bioimaging materials that exhibit organelle specific accumulation continues to be at the forefront of research interests and efforts. Among the various subcellular organelles, mitochondria, which are found in the cytoplasm of eukaryotic cells, are of particular interest in relation to their vital function. To date, most molecular probes that target mitochondria utilise delocalised lipophilic cations such as triphenylphosphonium and pyridinium. However, the use of such charged motifs is known to be detrimental to the working function of the mitochondrial transmembrane potential and there remains a strong case for development of neutral mitochondrial fluorescent probes. Herein, we demonstrate for the first time the exploitation of diketopyrrolopyrrole-based chemistries for the realisation of a neutral fluorescent probe that exhibits organelle specific accumulation within the mitochondria at the nanomolar level. The synthesised probe, which bears a neutral triphenylphosphine oxide moiety, exhibits a large Stokes shift and high fluorescence quantum yield in water, both highly sought-after properties in the development of bioimaging agents. In vitro studies reveal no interference with cell metabolism when tested for the human MCF7 breast cancer cell and nanomolar subcellular organelle colocalisation with commercially available mitochondrial staining agent Mitotracker Red. In light of its novelty, neutral structure and the preferential accumulation at nanomolar concentrations we anticipate this work to be of significant interest for the increasingly larger community devoted to the realisation of neutral mitochondrial selective systems and more widely to those engaged in the rational development of superior organic architectures in the biological field.