Metal-Assisted and Microwave-Accelerated Evaporative Crystallization

We describe a platform technology, called metal-assisted and microwave-assisted evaporative crystallization (MA-MAEC), based on the combined use of silver nanoparticles and microwave heating for selective and rapid crystallization of small molecules. In this regard, the crystallization of a model small molecule (glycine) was achieved in several seconds. Glycine crystals grown on silver nanostructures with and without microwave heating were found to be larger than those grown on blank glass slides. The MA-MAEC technique has the potential to selectively grow the desired polymorphs of small molecules "on-demand" in a fraction of the time as compared to the conventional evaporative crystallization.     

Quantitation of acrylamide in food products by liquid chromatography/mass spectrometry

A simple and inexpensive liquid chromatography/mass spectrometry (LC/MS) method was developed for the quantitation of acrylamide in various food products. The method involved spiking the isotope-substituted internal standard (1-C13 acrylamide) onto 6.00 g of the food product, adding 40 mL distilled/deionized water, and heating at 65 degrees C for 30 min. Afterwards, 10 mL ethylene dichloride was added and the mixture was homogenized for 30 s and centrifuged at 2700 x g for 30 min, and then 8 g supernatant was extracted with 10, 5, and 5 mL portions of ethyl acetate. The extracts were combined, dried with sodium sulfate, and concentrated to 100-200 microL. Acrylamide was determined by analysis of the final extract on a single quadrupole, bench-top mass spectrometer with electrospray ionization, using a 2 mm id C18 column and monitoring m/z = 72 (acrylamide) and m/z = 73 (internal standard). For difficult food matrixes, such as coffee and cocoa, a solid-phase extraction cleanup step was incorporated to improve both chromatography and column lifetime. The method had a limit of quantitation of 10 ppb, and coefficients of determination (r2) for calibration curves were typically better than 0.998. Acceptable spike recovery results were achieved in 11 different food matrixes. Precision in potato chip analyses was 5-8% (relative standard deviation). This method provides an LC/MS alternative to the current LC/MS/MS methods and derivatization gas chromatography/mass spectrometry methods, and is applicable to difficult food products such as coffee, cocoa, and high-salt foods.     

Micellar electrokinetic capillary chromatography and data alignment analysis: a new tool in urine profiling

The complex nature of biofluids demands efficient, sensitive and high-resolution analytical methodologies to examine how the 'metabolic fingerprint' changes during disease. This paper describes how sulphated beta-cyclodextrin-modified micellar electrokinetic capillary chromatography (SbetaCD-MECC) has been combined with data alignment analysis and may prove a useful new tool in urine profiling, allowing for separation of over 80 urinary analytes in under 25 min. The optimised and validated SbetaCD-MECC methodology combined with data alignment analysis provides rapid identification of 'mismatches' between urine profiles which are not easily detected with the naked eye as well as a 'similarity score' which indicates the total sum of differences between one profile and another. The combination of SbetaCD-MECC with data alignment software should prove a useful alternative tool in metabonomic studies for rapid comparison of urine profiles.     

Anomalous absorption of bulk shear sagittal acoustic waves in a layered structure with viscous fluid

It is demonstrated theoretically that the absorptivity of bulk shear sagittal waves by an ultra-thin layer of viscous fluid between two different elastic media has a strong maximum (in some cases as good as 100%) at an optimal layer thickness. This thickness is usually much smaller than the penetration depths and lengths of transverse and longitudinal waves in the fluid. The angular dependencies of the absorptivity are demonstrated to have significant and unusual structure near critical angles of incidence. The effect of non-Newtonian properties and non-uniformities of the fluid layer on the absorptivity is also investigated. In particular, it is shown that the absorption in a thin layer of viscous fluid is much more sensitive to non-zero relaxation time(s) in the fluid layer than the absorption at an isolated solid-fluid interface.     

Continuous-Wave Operation of a 460-GHz Second Harmonic Gyrotron Oscillator

We report the regulated continuous-wave (CW) operation of a second harmonic gyrotron oscillator at output power levels of over 8 W (12.4 kV and 135 mA beam voltage and current) in the TE(0,6,1) mode near 460 GHz. The gyrotron also operates in the second harmonic TE(2,6,1) mode at 456 GHz and in the TE(2,3,1) fundamental mode at 233 GHz. CW operation was demonstrated for a one-hour period in the TE(0,6,1) mode with better than 1% power stability, where the power was regulated using feedback control. Nonlinear simulations of the gyrotron operation agree with the experimentally measured output power and radio-frequency (RF) efficiency when cavity ohmic losses are included in the analysis. The output radiation pattern was measured using a pyroelectric camera and is highly Gaussian, with an ellipticity of 4%. The 460-GHz gyrotron will serve as a millimeter-wave source for sensitivity-enhanced nuclear magnetic resonance (dynamic nuclear polarization) experiments at a magnetic field of 16.4 T.     

Cyclization of Propargylic Amides: Mild Access to Oxazole Derivatives

The substrate scope, the mechanistic aspects of the gold‐catalyzed oxazole synthesis, and substrates with different aliphatic, aromatic, and functional groups in the side chain were investigated. Even molecules with several propargyl amide groups could easily be converted, delivering di‐ and trioxazoles with interesting optical properties. Furthermore, the scope of the gold(I)‐catalyzed alkylidene synthesis was investigated. Further functionalizations of these isolable intermediates of the oxazole synthesis were developed and chelate ligands can be obtained. The use of Barluenga’s reagent offers a new and mild access to the synthetically valuable iodoalkylideneoxazoles from propargylic amides, this reagent being superior to other sources of halogens.     

Separation by hydrophobic interaction chromatography and structural determination by mass spectrometry of mannosylated glycoforms of a recombinant transferrin-exendin-4 fusion protein from yeast

Obtaining sufficient amounts of pure glycoprotein variants to characterize their structures is an important goal in both functional biology and the biotechnology industry. We have developed preparative HIC conditions that resolve glycoform variants on the basis of overall carbohydrate content for a recombinant transferrin-exendin-4 fusion protein. The fusion protein was expressed from the yeast Saccharomyces cerevisiae from high density fermentation and is post-translationally modified with mannose sugars through O-glycosidic linkages. Overall hydrophobic behavior appeared to be dominated by the N-terminal 39 amino acids from the exendin-4 and linker peptide sequences as compared to the less hydrophobic behavior of human transferrin alone. In addition, using LC techniques that measure total glycans released from the pure protein combined with new high resolution technologies using mass spectrometry, we have determined the locations and chain lengths of mannose residues on specific peptides derived from tryptic maps of the transferrin-exendin-4 protein. Though the protein is large (80,488 kDa) and contains 78 possible serine and threonine residues as potential sites for sugar addition, mannosylation was observed on only two tryptic peptides located within the first 55 amino acids of the N-terminus. These glycopeptides were highly heterogeneous and contained between 1 and 10 mannose residues scattered among the various serine and threonine sites which were identified by electron transfer dissociation mass spectrometry. Glycan sequences from 1 to 6 linear mannose residues were detected, but mannose chain lengths of 3 or 4 were more common and formed 80% of the total oligosaccharides. This work introduces new technological capabilities for the purification and characterization of glycosylated variants of therapeutic recombinant proteins.     

Ferrihydrite modification by boron doping

Application of the electrostatic ion storage ring ELISA to studies of clusters and biomolecules is discussed. Ions injected from a plasma source or a sputter source are hot, and at short times the yield of neutrals is usually dominated by decay of metastable ions. We have demonstrated that the decay function is close to a 1/t dependence when the internal energy of the ions is conserved, i.e., when photon emission can be ignored. Deviations from a 1/t distribution therefore gives information about the radiative lifetime or, for larger systems, about the intensity of the emitted radiation. Systematic measurements have been carried out for fullerene anions C _N ^?, for even values of N from 36 to 96, to test a classical dielectric model. Recently we have installed an electrospray ion source with a Paul trap for bunching, which can be used to inject biomolecular ions from solution, and the first experiments on laser spectroscopy of biomolecules have been carried out. Also lifetimes of excited states have been measured for stored biomolecular ions excited by a laser pulse.

     

Controlling influences in bisspiroketal formation: synthesis of the ABC ring system of azaspiracid

Substitution effects on the stereochemical outcome of bisspiroketalization on the C₁-C₁₇ carbon backbone of azaspiracid is presented. A possible explanation is offered to explain the observed stereochemical outcome.