Characterization of the nanostructure of complexes formed by a redox-active cationic lipid and DNA

We report characterization of the nanostructures of complexes formed between the redox-active lipid bis(n-ferrocenylundecyl)dimethylammonium bromide (BFDMA) and DNA using small-angle neutron scattering (SANS) and cryogenic transmission electron microscopy (cryo-TEM). A particular focus was directed to the influence of lipid oxidation state (where reduced BFDMA has a net charge of +1 and oxidized BFDMA has a charge of +3) on the nanostructures of the solution aggregates formed. Complexes were characterized over a range of charge ratios of reduced BFDMA to DNA (1.1:1, 2.75:1, and 4:1) in solutions of 1 mM Li2SO4. For these complexes, a single peak in the SANS data at 1.2 nm(-1) indicated that a nanostructure with a periodicity of 5.2 nm was present, similar to that observed with complexes of the classical lipids DODAB/DOPE and DNA (multilamellar spacing of 7.0 nm). The absence of additional Bragg peaks in all the SANS data indicated that the periodicity did not extend over large distances. Both inverse Fourier transform analysis and form factor fitting suggested formation of a multilamellar vesicle. These results were confirmed by cryo-TEM images in which multilamellar complexes with diameters between 50 and 150 nm were observed with no more than seven lamellae per aggregate. In contrast to complexes of reduced BFDMA and DNA, Bragg peaks were absent in SANS spectra of complexes formed by oxidized BFDMA and DNA at all charge ratios investigated. The low-q behavior of the SANS data obtained using oxidized BFDMA and DNA complexes suggested that large, loose aggregates were formed, consistent with complementary cryo-TEM images showing predominantly loose disordered aggregates. Some highly ordered spongelike and cubic phase nanostructures were also detected in cryo-TEM images. We conclude that control of BFDMA oxidation state can be used to manipulate the nanostructures of lipid-DNA complexes formed using BFDMA.     

Novel polyisobutylene/poly(dimethylsiloxane) bicomponent networks. I. Synthesis and characterization

The synthesis of novel polyisobutylene (PIB)/poly(dimethylsiloxane) (PDMS) bicomponent networks is described. The synthesis strategy (see Figure 1) was to prepare well-defined and -characterized allyl-tritelechelic polyisobutylenes [ϕ(PIB—C—C=C)₃] and SiH-ditelechelic poly(dimethylsiloxanes) (HSi–PDMS–SiH) and then crosslink these moieties by hydrosilation. The ϕ(PIB—C—C=C)₃ was prepared by living isobutylene polymerization followed by end-quenching with allyltrimethylsilane, whereas the HSi–PDMS–SiH was obtained by equilibrium polymerization of octamethylcyclotetrasiloxane and tetramethyldisiloxane. The detailed structures of the starting polymers were characterized by GPC and ¹H-NMR spectroscopy. A series of PIB/PDMS bicomponent networks of varying compositions and average molecular weights between crosslinks (M _c) of ∼ 20,000 g/mol were assembled. Optimum crosslinking conditions were defined in terms of H₂PtCl₆ catalyst concentration, nature of solvent, time, temperature, and stoichiometry of ∼ CH₂CH=CH₂/∼SiH groups, allowing for the convenient synthesis of well-defined model bicomponent networks. Swelling studies and elemental analysis confirm the correctness of the synthetic strategy. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1891–1899, 1998     

Antimicrobial Polyketide Metabolites from Penicillium bissettii and P. glabrum

Screening of several fungi from the New Zealand International Collection of Microorganisms from Plants identified two strains of Penicillium, P. bissettii and P. glabrum, which exhibited antimicrobial activity against Escherichia coli, Klebsiella pneumoniae, and Staphylococcus aureus. Further investigation into the natural products of the fungi, through extraction and fractionation, led to the isolation of five known polyketide metabolites, penicillic acid (1), citromycetin (2), penialdin A (3), penialdin F (4), and myxotrichin B (5). Semi-synthetic derivatization of 1 led to the discovery of a novel dihydro (1a) derivative that provided evidence for the existence of the much-speculated open-chained form of 1. Upon investigation of the antimicrobial activities of the natural products and derivatives, both penicillic acid (1) and penialdin F (4) were found to inhibit the growth of Methicillin-resistant S. aureus. Penialdin F (4) was also found to have some inhibitory activity against Mycobacterium abscessus and M. marinum along with citromycetin (2).     

Synthesis and structural characterization of heterometallic thorium aluminum polynuclear molecular clusters

Aluminum can undergo hydrolysis in aqueous solutions leading to the formation of soluble molecular clusters, including polynuclear species that range from 1 to 2 nm in diameter. While the behavior of aluminum has been extensively investigated, much less is known about the hydrolysis of more complex mixed-metal systems. This study focuses on the structural characteristics of heterometallic thorium-aluminum molecular species that may have important implications for the speciation of tetravalent actinides in radioactive waste streams and environmental systems. Two mixed metal (Th(4+)/Al(3+)) polynuclear species have been synthesized under ambient conditions and structurally characterized by single-crystal X-ray diffraction. [Th(2)Al(6)(OH)(14)(H(2)O)(12)(hedta)(2)](NO(3))(6)(H(2)O)(12) (ThAl1) crystallizes in space group P2(1)/c with unit cell parameters of a = 11.198(1) ?, b = 14.210(2) ?, c = 23.115(3) ?, and β = 96.375° and [Th(2)Al(8)(OH)(12)(H(2)O)(10)(hdpta)(4)](H(2)O)(21) (ThAl2) was modeled in P1? with a = 13.136(4) ?, b = 14.481(4) ?, c = 15.819(4) ?, α = 78.480(9)°, β = 65.666(8)°, γ = 78.272(8)°. Infrared spectra were collected on both compounds, confirming complexation of the ligand to the metal center, and thermogravimetric analysis indicated that the thermal degradation of these compounds resulted in the formation of an amorphous product at high temperatures. These mixed metal species have topological relationships to previously characterized aluminum-based polynuclear species and may provide insights into the adsorption of tetravalent actinides on colloidal or mineral surfaces.     

Identification of the pathological prion protein allotypes in scrapie-infected heterozygous bank voles (Clethrionomys glareolus) by high-performance liquid chromatography-mass spectrometry

Cerebral formation of the pathological isoform of the prion protein (PrP) is a crucial molecular event in prion diseases. The bank vole (Clethrionomys glareolus) is a rodent species highly susceptible to natural scrapie. The PrP gene of bank vole is polymorphic (Met/Ile) at codon 109. Here we show that homozygous 109Met/Met voles have incubation times shorter than heterozygous 109Met/Ile voles after experimental challenge with three different scrapie isolates. An HPLC-MS/MS method was optimized and applied to investigate whether in heterozygous animals both PrP allotypes are able to undergo pathological conversion. The results demonstrate that both allotypes of the prion protein participate to pathological deposition.     

Modular and tunable chemosensor scaffold for divalent zinc

A modular peptide scaffold has been developed for fluorescent sensing of divalent zinc. The signaling component of the chemosensor is the chelation-sensitive fluorophore 8-hydroxy-5-(N,N-dimethylsulfonamido)-2-methylquinoline, which is prepared as the protected amino acid derivative Fmoc-Sox-OH and integrated into peptide sequences. Nineteen synthetic peptides incorporating the signaling element exhibit a range of affinities for Zn(2+) through variation of the type and number of Zn(2+) ligands, ligand arrangement and the beta-turn sequence that acts as a preorganization element between the ligands. The stoichiometry of the peptide-Zn(2+) complexes is evaluated by several criteria. The fluorescence response of these peptides to pH and various important metal ions is reported. Eleven of these sequences form only 1:1 complexes with Zn(2+) and their affinities range from 10 nM to nearly 1 microM. When used in concert, these sensors can provide Zn(2+) concentration information in a valuable range.     

Enhanced Methylarginine Characterization by Post-Translational Modification-Specific Targeted Data Acquisition and Electron-Transfer Dissociation Mass Spectrometry

When localizing protein post-translational modifications (PTMs) using liquid-chromatography (LC)-tandem mass spectrometry (MS/MS), existing implementations are limited by inefficient selection of PTM-carrying peptides for MS/MS, particularly when PTM site occupancy is sub-stoichiometric. The present contribution describes a method by which peptides carrying specific PTMs of interest-in this study, methylarginines-may be selectively targeted for MS/MS: peptide features are extracted from high mass accuracy single-stage MS data, searched against theoretical PTM-carrying peptide masses, and matching features are subjected to targeted data acquisition LC-MS/MS. Using trypsin digested Saccharomyces cerevisiae Npl3, in which evidence is presented for 18 methylarginine sites-17 of which fall within a glycine-arginine-rich (GAR) domain spanning <120 amino acids-it is shown that this approach outperforms conventional data dependent acquisition (DDA): when applied to a complex protein mixture featuring in vivo methylated Npl3, 95% more (P=0.030) methylarginine-carrying peptides are selected for MS/MS than DDA, leading to an 86% increase (P=0.044) in the number of methylated peptides producing Mascot ion scores ≥20 following electron-transfer dissociation (ETD). Notably, significantly more low abundance arginine methylated peptides (maximum ion intensities <6×10(4) cps) are selected for MS/MS using this approach relative to DDA (50% more in a digest of purified in vitro methylated Npl3). It is also demonstrated that relative to collision-induced dissociation (CID), ETD facilitates a 586% increase (P=0.016) in average Mascot ion scores of methylarginine-carrying peptides. The present PTM-specific targeted data acquisition approach, though described using methylarginine, is applicable to any ionizable PTM of known mass.     

Lipase production by solid-state fermentation

The production of lipase by Penicillium simplicissimum in solid-state fermentation was studied using babassu cake as the basal medium. Tray-type and packed-bed bioreactors were employed. In the former, the influence of temperature; content of the medium, and medium supplementation with olive oil, sugarcane molasses, corn steep liquor, and yeast hydrolysate was studied. For all combinations of supplements, a temperature of 30°C, a moisture content of 70%, and a concentration of carbon source of 6.25% (m/m, dry basis) provided optimum conditions for lipase production. When used as single supplements olive oil and molasses also were able to provide high lipase activities (20 U/g). Using packed-bed bioreactors and molasses-supplemented medium, optimum conditions for enzyme production were air superficial velocities above 55 cm/min and temperatures below 28°C. The lower temperature optimum found for these reactors is probably related to radial heat gradient formation inside the packed bed. Maximum lipase activities obtained in these bioreactors (26.4 U/g) were 30% higher than in tray-type reactors.     

Anomalous absorption of bulk shear sagittal acoustic waves in a layered structure with viscous fluid

It is demonstrated theoretically that the absorptivity of bulk shear sagittal waves by an ultra-thin layer of viscous fluid between two different elastic media has a strong maximum (in some cases as good as 100%) at an optimal layer thickness. This thickness is usually much smaller than the penetration depths and lengths of transverse and longitudinal waves in the fluid. The angular dependencies of the absorptivity are demonstrated to have significant and unusual structure near critical angles of incidence. The effect of non-Newtonian properties and non-uniformities of the fluid layer on the absorptivity is also investigated. In particular, it is shown that the absorption in a thin layer of viscous fluid is much more sensitive to non-zero relaxation time(s) in the fluid layer than the absorption at an isolated solid-fluid interface.