Uranium analysis in urine by inductively coupled plasma dynamic reaction cell mass spectrometry

Urine uranium concentrations are the best biological indicator for identifying exposure to depleted uranium (DU). Internal exposure to DU causes an increased amount of urine uranium and a decreased ratio of ²³⁵U/²³⁸U in urine samples, resulting in measurements that vary between 0.00725 and 0.002 (i.e., natural and depleted uraniums ²³⁵U/²³⁸U ratios, respectively). A method based on inductively coupled plasma dynamic reaction cell mass spectrometry (ICP-DRC-MS) was utilized to identify DU in urine by measuring the quantity of total U and the ²³⁵U/²³⁸U ratio. The quantitative analysis was achieved using ²³³U as an internal standard. The analysis was performed both with and without the reaction gas oxygen. The reaction gas converted ionized ²³⁵U⁺ and ²³⁸U⁺ into ²³⁵UO₂⁺ (m/z=267) and ²³⁸UO₂⁺ (m/z=270). This conversion was determined to be over 90% efficient. A polyatomic interference at m/z 234.8 was successfully removed from the ²³⁵U signal under either DRC operating conditions (with or without oxygen as a reaction gas). The method was validated with 15 urine samples of known uranium compositions. The method detection limit for quantification was determined to be 0.1 pg U mL^–1 urine and an average coefficient of variation (CV) of 1–2% within the sample measurements. The method detection limit for determining ²³⁵U/²³⁸U ratio was 3.0 pg U mL^–1 urine. An additional 21 patient samples were analyzed with no information about medical history. The measured ²³⁵U/²³⁸U ratio within the urine samples correctly identified the presence or absence of internal DU exposure in all 21 patients.The opinions and assertions expressed herein are those of the authors and are not to be construed as official or as representing the views of the Armed Forces Institute of Pathology, the Department of the Army, or the Department of Defense     

A new thermoelectric material: CsBi4Te6

The highly anisotropic material CsBi(4)Te(6) was prepared by the reaction of Cs/Bi(2)Te(3) around 600 degrees C. The compound crystallizes in the monoclinic space group C2/m with a = 51.9205(8) A, b = 4.4025(1) A, c = 14.5118(3) A, beta = 101.480(1) degrees, V = 3250.75(11) A(3), and Z = 8. The final R values are R(1) = 0.0585 and wR(2) = 0.1127 for all data. The compound has a 2-D structure composed of NaCl-type [Bi(4)Te(6)] anionic layers and Cs(+) ions residing between the layers. The [Bi(4)Te(6)] layers are interconnected by Bi-Bi bonds at a distance of 3.2383(10) A. This material is a narrow gap semiconductor. Optimization studies on the thermoelectric properties with a variety of doping agents show that the electrical properties of CsBi(4)Te(6) can be tuned to yield an optimized thermoelectric material which is promising for low-temperature applications. SbI(3) doping resulted in p-type behavior and a maximum power factor of 51.5 microW/cm.K(2) at 184 K and the corresponding ZT of 0.82 at 225 K. The highest power factor of 59.8 microW/cm.K(2) at 151 K was obtained from 0.06% Sb-doped material. We report here the synthesis, physicochemical properties, doping characteristics, charge-transport properties, and thermal conductivity. Also presented are studies on n-type CsBi(4)Te(6) and comparisons to those of p-type.     

Enzymatic synthesis of medium chain monoglycerides in a solvent-free system

The synthesis of monocaprin, monolaurin, and monomyristin in a solvent-free system was conducted by mixing a commercial immobilized lipase with the organic reactants (glycerol and fatty acids) in a 20-mL batch reactor with constant stirring. The effects of temperature, fatty acid/glycerol molar ratio, and enzyme concentration on the reaction conversion were determined. The addition of molecular sieves in the assays of monomyristin synthesis was also evaluated. The reactions were carried out for 5 to 6 h and the nonpolar phase was analyzed by gas chromatography. The best results in terms of selectivity and conversion (defined as the percentage of fatty acid consumed) were achieved when the stoichiometric amount of reagents (molar ratio=1) and 9% (w/w) commercial enzyme were used and the reaction was performed at 60°C. The addition of molecular sieves did not improve the synthesis of monomyristin. Conversions as high as 80%, with monoglycerides being the major products, were attained. After 5 h of reaction, the concentration of monoglyceride was about twice that of diglyceride, and only trace amounts of triglyceride were found. The results illustrate the technical possibility of producing medium chain monoglycerides in a solvent-free medium using a simple batch reactor.     

The combinatorial game Nofil played on Steiner triple systems

We introduce an impartial combinatorial game on Steiner triple systems called Next One to Fill Is the Loser (Nofil ). Players move alternately, choosing points of the triple system. If a player is forced to fill a block on their turn, they lose. By computing nim-values, we determine optimal strategies for Nofil on all Steiner triple systems up to order 15 and a sampling for orders 19, 21 and 25. The game Nofil can be thought of in terms of play on a corresponding hypergraph which will become a graph during play. At that point Nofil is equivalent to playing the game Node Kayles on the graph. We prove necessary conditions and sufficient conditions for a graph to reached playing Nofil. We conclude that the complexity of determining the outcome of the game Nofil on Steiner triple systems is PSPACE-complete for randomized reductions.     

Suppression of non-specific adsorption using sheath flow

The use of a confining sheath fluid within a microfluidic channel in order prevent non-specific adsorption of analytes to the walls of microchannels is demonstrated. A sheath-flow channel fabricated using laser cutting of Mylar films is developed. Numerical simulations of convective and diffusive mass transport within the channel are presented. The device is characterized experimentally using epifluorescence microscopy. It is demonstrated that the device is capable of preventing the adsorption of Rhodamine B to the walls of the channel for a period that would allow for adsorption-free T-sensor measurements to be made within the core of the flow channel. Generalized scaling rules based on the diffusion coefficient, sheath thickness and affinity of the potential adsorbant for the surface material are discussed. The controlled adsorption of the protein bovine serum albumin (BSA) to a gold surface is also demonstrated using SPR microscopy.     

Micellar electrokinetic capillary chromatography and data alignment analysis: a new tool in urine profiling

The complex nature of biofluids demands efficient, sensitive and high-resolution analytical methodologies to examine how the 'metabolic fingerprint' changes during disease. This paper describes how sulphated beta-cyclodextrin-modified micellar electrokinetic capillary chromatography (SbetaCD-MECC) has been combined with data alignment analysis and may prove a useful new tool in urine profiling, allowing for separation of over 80 urinary analytes in under 25 min. The optimised and validated SbetaCD-MECC methodology combined with data alignment analysis provides rapid identification of 'mismatches' between urine profiles which are not easily detected with the naked eye as well as a 'similarity score' which indicates the total sum of differences between one profile and another. The combination of SbetaCD-MECC with data alignment software should prove a useful alternative tool in metabonomic studies for rapid comparison of urine profiles.     

Recent advances in micellar electrokinetic chromatography

This review contains nearly 200 reference citations, and covers advances in electrokinetic capillary chromatography based on micelles, including stabilized micelle complexes, polymeric and mixed micelles from 2003-2004. Detection strategies, analyte determinations, and applications in micellar electrokinetic capillary chromatography (MEKC) are discussed. Information regarding methods of analyte concentration, analyte specific analyses, and nonstandard micelles has been summarized in tabular form to provide a means of rapid access to information pertinent to the reader.     

Synthesis and properties of new ditertiary stibines based upon o-, m- or p-xylyl and m- or p-phenylene backbones and their complexes with tungsten, iron and nickel carbonyls

High yield syntheses for 1,2-, 1,3-, and 1,4-xylyl distibines (1,2-C6H4(CH2SbMe2)2, 1,3-C6H4(CH2SbMe2)2, 1,4-C6H4(CH2SbMe2)2, respectively) from Me2SbCl (conveniently made in situ from Me2PhSb and HClgas) and the appropriate di-Grignard are reported. The 1,3- and 1,4-phenylene distibines, 1,3-C6H4(SbMe2)2 and 1,4-C6H4(SbMe2)2, were made similarly. The new ligands have been characterised by mass spectrometry, 1H and 13C[1H] NMR spectroscopy, and by the preparation of methiodide derivatives. The crystal structures of 1,4-C6H4(CH2SbMe2)2 and [1,3-C6H4(CH2SbMe3)2]I2 have been determined. The synthesis of 1,2-C6H4(CH2SbPh2)2 has been achieved similarly in modest yield and the distibine converted into the tetra-iodo-derivative 1,2-C6H4(CH2SbPh2I2)2. The coordination modes available to these ligands have been probed by the synthesis and characterisation of complexes with nickel, iron and tungsten carbonyls. The crystal structure of [[Fe(CO)4]2[micro-1,3-C6H4(CH2SbMe2)2]] has been determined. The spectroscopic properties of these carbonyl derivatives have been compared with those of complexes of other antimony ligands, and in some cases with diphosphine and diarsine complexes, to probe the electronic properties of the new ligands.     

Flame ionization detection after splitting the water effluent in subcritical water chromatography

The coupling of subcritical water separation with flame ionization detection (FID) in the split mode has been investigated in this study. In order to keep the FID system stable during subcritical water separation, a Tee union was connected between the separation column and the FID system to split the water flow. The ratio of the water flow to the FID system over the flow-rate to a waste bottle varied depending on the dimension of capillary tubings and the total water flow-rate used. Separations of several carbohydrates, carboxylic acids, and amino acids were performed on commercially available columns using a laboratory-made subcritical water chromatography-FID system. The FID system was very stable in this split mode even at total flow-rate as high as 1.24 ml/min. The linear dynamic range was up to three orders of magnitude and the limit of detection (LOD) ranged from 38 to 111 ng (306-925 ng/microl injected) with split ratios of approximately 1:10 to approximately 1:17 (FID/waste bottle) for several analytes studied. However, the LOD can be significantly lowered by adjusting the dimensions of the restrictors to allow a higher percentage of the total flow to the FID system.     

Electrochemistry of niobium(V) in sulfuric and methanesulfonic acids: formation of the Nb3O2(SO4)6(H2O)(3)(5-) cluster and designed electrochemical generation of "Nb3O2" core clusters by double potential pulse electrolysis

The electrochemical and spectroelectrochemical properties of niobium(V) and the Nb(3)O(2)(SO(4))(6)(H(2)O)(3)(5-) cluster in sulfuric acid and methanesulfonic acid were investigated using cyclic voltammetry, constant potential electrolysis, and spectroelectrochemistry. These chemical systems were suitable to probe the formation of "Nb(3)O(2)" core trinuclear clusters. In 9 M H(2)SO(4) the cluster Nb(3)O(2)(SO(4))(6)(H(2)O)(3)(5-) exhibited a reversible 1-electron reduction peak at E(pc) = -1.30 V vs Hg/Hg(2)SO(4) electrode, as well as a 4-electron irreversible oxidation peak at E(pa) = -0.45 V. Controlled potential reduction at E = -1.40 V produced the green Nb(3.33+) cluster anion Nb(3)O(2)(SO(4))(6)(H(2)O)(3)(6-). In 12 M H(2)SO(4) Nb(V) displayed two reduction peaks at E(pc) = -1.15 V and E(pc) = -1.30 V. It was determined that the first process involves a quasi-reversible 2-electron reduction. After reduction of Nb(V) to Nb(III) the following chemical step involves formation of [Nb(III)](2) dimer, which further reacts with Nb(V) to produce the Nb(3)O(2)(SO(4))(6(H(2)O)(3)(5-) cluster (ECC process). The second reduction peak at E(pc) = -1.30 V corresponds to further 2-electron reduction of Nb(III) to Nb(I). The electrogenerated Nb(I) species also chemically reacts with starting material Nb(V) to produce additional [Nb(III)](2). In 5 M H(2)SO(4), the rate of the second chemical step in the ECC process is relatively slower and reduction of Nb(V) at E = -1.45 V/-1.2 V produces a mixture of Nb(3)O(2)(SO(4))(6)(H(2)O)(3)(5-) and [Nb(III)](2) dimer. [Nb(III)](2) can be selectively oxidized by two 2-electron steps at E = -0.65 V to Nb(V). However, if the oxidation is performed at E = -0.86 V, the product is Nb(3)O(2)(SO(4))(6)(H(2)O)(3)(5-). A double potential pulse electrolysis waveform was developed to direct the reduction of Nb(V) toward selective formation of the Nb(3)O(2)(SO(4))(6)(H(2)O)(3)(5-) cluster. Proper application of dc-voltage pulses alternating between E(1) = -1.45 V and E(2) = -0.86 V yields only the target trinuclear cluster. Analogous double potential pulse electrolysis of Nb(V) in methanesulfonic acid generates the "Nb(3)O(2)" core cluster Nb(3)O(2)(CH(3)SO(3))(6)(H(2)O)(3)(+).