Development, validation and transfer of a hydrophilic interaction liquid chromatography/tandem mass spectrometric method for the analysis of the tobacco-specific nitrosamine metabolite NNAL in human plasma at low picogram per milliliter concentrations

A highly sensitive bioanalytical method based on a simple liquid/liquid extraction and hydrophilic interaction liquid chromatography with tandem mass spectrometry (HILIC/MS/MS) analysis has been developed, validated and transferred for the determination of 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol (NNAL), a tobacco-specific nitrosamine metabolite. Deuterated NNAL (NNAL-d(4)) was synthesized and used as the internal standard. This method can be used for the analysis of free and total NNAL (free NNAL plus NNAL-gluc) in K(3)-EDTA human plasma. Free NNAL and NNAL-d(4) are extracted from human plasma by liquid/liquid extraction. To analyze for total NNAL and the internal standard, a separate aliquot of the K(3)-EDTA human plasma is treated with beta-glucuronidase to deconjugate the NNAL-gluc; the total NNAL and internal standard are then extracted using liquid/liquid extraction. After drying down under nitrogen, the residue is reconstituted with acetonitrile and analyzed using positive ion electrospray and HILIC/MS/MS at a flow rate of 1.0 mL/min. The chromatographic run time is 1.0 min per injection, with retention time for both NNAL and NNAL-d(4) of 0.75 min with a capacity factor (k') of 2. The standard curve range for this assay is from 5.00-1000 pg/mL for both free and total NNAL, using a total plasma sample volume of 1.0 mL. The interday precision and accuracy of the quality control (QC) samples demonstrated <7.6% relative standard deviation (RSD) and <3.3% relative error (RE) for free NNAL. For total NNAL, the interday precision and accuracy of the QC samples demonstrated <11.7% RSD and <2.8% RE. Optimization of enzyme hydrolysis of NNAL-gluc is discussed in detail. The overall recoveries for free and total NNAL and IS were 68.2 and 71.5% (free) and 70.7 and 65.5% (total). No adverse matrix effects were noticed for this assay.     

Turbulence in microfluidics: Cleanroom-free,fast, solventless,and bondless fabrication and application in high throughput liquid-liquid extraction

This paper addresses an important breakthrough in the deployment of ultra-high adhesion strength microfluidic technologies to provide turbulence at harsh flow rate conditions. This paper is only, to our knowledge, the second reporting on the generation of high flow rate-assisted turbulence in microchannels. This flow solves a crucial bottleneck in microfluidics: the generation of high throughput homogeneous mixings. We focused on the fabrication of bulky polydimethylsiloxane (PDMS) microchips (without any interfaces) rather than the laborious surface modifications that were employed in the first reporting about turbulence-assisted microfluidics. The fabrication is cleanroom-free, simple, low-cost, fast, solventless, and bondless requiring only a laboratory oven. More specifically, our method relies on the shaping of a nylon scaffold, cure of PDMS with embedded nylon, and removal of this scaffold. The scaffold was obtained by manually wrapping nylon threads. The withdrawing out of the scaffold was completed in few seconds using only a plier. Such microchannels endured flow rates of up to 60.0 mL min⁻¹ with a strikingly low elastic deformation. The importance in producing turbulence into microscale channels was successfully shown in liquid-liquid extractions. The great energy dissipation rate relative to the turbulence created high throughput and efficient extractions in microfluidics for the first time. The residence time was only 0.01 s at 25.0 mL min⁻¹ (total flow rate of the immiscible phases). In addition, the partition coefficient determined in a single run was similar to that obtained by the conventional batch shake-flask method that was realized in triplicate.     

Influence of Gold Nanoparticle Film Porosity on the Chemiresistive Sensing Performance

The porosity of 1‐hexanethiol‐functionalised gold nanoparticle films was assessed and utilised as chemiresistor sensors. Electrochemical capacitance measurements showed that the accessibility of electrolytes of different ionic strengths into the pores depended on the thickness of the electric double layer formed. A large variation in capacitance was measured in 0.01–1000 mM NaClO₄, implying a wide pore size distribution. The change in morphology of the nanoparticle films upon storage in air, water and ethanol for two weeks was investigated. There was a significant decrease in the electrochemical capacitance at high electrolyte concentrations for the ethanol‐stored films compared to the freshly‐prepared films suggesting a decrease in the number of small pores of radii in the range of 0.3–3 nm. This was further supported by optical topographical measurements where a decrease in the thickness of ethanol‐stored films was observed relative to the freshly‐prepared films. The porous nature of the nanoparticle films was found to have an effect on the chemical sensing behaviour. When used as chemiresistor sensors, for the detection of heptane in water, the ethanol‐stored films provided larger resistance changes and longer response times. This suggests that the more densely packed ethanol‐stored films provided more sites that enabled film swelling, and that diffusion of the analyte occurred through the narrower water‐filled pores. This demonstrates the effect of different storage conditions on film morphology and subsequently sensor response.     

Solid-phase extraction of triazole fungicides from water samples using disks impregnated with carbon nanotubes followed by GC-MS analysis

Triazole fungicides are pesticides widely employed in the cultivation of fruits, vegetables and grains. However, their ability to change the steroid hormone biosynthesis may result in endocrine complications for mammals, as well as changes in cholesterol and triglyceride levels and hepatotoxicity. The analysis of the triazole fungicides in superficial waters is important in order to monitor the risk for the biota. However, the use of efficient extraction procedures has been necessary in order to concentrate these pesticides before the analysis. In-disk solid-phase extraction (SPE) can be highlighted as a potential pre-concentration technique, mainly because the possibility to extract the analytes from a large sample volume, increasing the method detectability. Carbon nanotubes (CNTs) have been often used as solid extraction phase due to their high sorption capacity, surface area and internal volume, as well as mechanical, chemical and thermal stability. In this paper, we proposed the preparation of a new SPE disk impregnated with CNTs for the extraction of triazole fungicides from environmental water samples. The disks were obtained by acid corrosion of a cellulose membrane followed by its impregnation with CNTs. The developed method was validated for the analysis of triadimenol, tebuconazole and epoxiconazole, according to international validation protocols. The limits of quantification obtained for triadimenol, tebuconazole and epoxiconazole were 0.1, 0.1 and 0.05 µg L^?1, respectively. The linearity ranged from 0.05 to 10.00 µg L^?1 for epoxiconazole and from 0.1 to 10.00 µg L^?1 for triadimenol and tebuconazole, with correlation coefficients higher than 0.999 for all of them. The precisions, expressed as relative standard deviation, were lower than 12%. The accuracies were within ?12.07% to 17.7% (expressed as relative error).     

99Tc NMR as a promising technique for structural investigation of biomolecules: theoretical studies on the solvent and thermal effects of phenylbenzothiazole complex

The phenylbenzothiazole compounds show antitumor properties and are highly selective. In this paper, the ⁹⁹Tc chemical shifts based on the (^99mTc)(CO)₃(NNO) complex conjugated to the antitumor agent 2‐(4′‐aminophenyl)benzothiazole are reported. Thermal and solvent effects were studied computationally by quantum‐chemical methods, using the density functional theory (DFT) (DFT level BPW91/aug‐cc‐pVTZ for the Tc and BPW91/IGLO‐II for the other atoms) to compute the NMR parameters for the complex. We have calculated the ⁹⁹Tc NMR chemical shifts of the complex in gas phase and solution using different solvation models (polarizable continuum model and explicit solvation). To evaluate the thermal effect, molecular dynamics simulations were carried, using the atom‐centered density matrix propagation method at the DFT level (BP86/LanL2dz). The results highlight that the ⁹⁹Tc NMR spectroscopy can be a promising technique for structural investigation of biomolecules, at the molecular level, in different environments. Copyright © 2014 John Wiley & Sons, Ltd.     

Efficient Detection of Phthalate Esters in Human Saliva via Fluorescence Spectroscopy

The detection of phthalates in human biologic fluids remains an important research objective because it provides an important measure of an individual’s exposure to this class of compounds, which have known deleterious health effects. Moreover, the ability to accomplish such detection in fluids that are easy to collect, such as saliva and urine, provides additional practical advantages. Reported herein is the application of cyclodextrin-promoted fluorescence energy transfer and fluorescence modulation to accomplish precisely such detection: the development of sensitive and selective florescence-based detection methods for phthalates in saliva, an easily collectable human biologic fluid. Such saliva-based detection methods occur with high levels of selectivity (100% differentiation) and sensitivity (limits of detection as low as 0.089?µM), and provide significant potential in the development of practical phthalate detection devices.