Efficient low-temperature oxidation of carbon-cluster anions by SO2

Carbon-cluster anions, CN-, are very reactive toward SO2 (sticking probability of 0.012 +/- 0.005 for C27- at 25 degrees C), in contrast to their inertness toward other common atmospheric gases and pollutants. In flow reactor experiments at ambient temperature and near atmospheric pressure, primary adsorption of SO2 by the carbon cluster anions, N = 4-60, yields CNSO2- or CN-1S-. The inferred elimination of neutral CO2 is also detected as meta-stable decay in collision-induced dissociation. At higher temperatures, the reaction of SO2 with nascent carbon clusters yields CN-1SO- as well as undetected CO. The size-dependent initial reactivity reflects the previously established structural transitions (i.e., from chain to cyclic to cage structures). Such carbon clusters are formed in sooting flames and may act as nuclei for the formation of primary soot particles and serve as models for the local structural features of active soot particle sites for black-carbon soot. The facile generation of reactive carbon-sulfide and -sulfinate units may therefore have implications for understanding the health and environmental effects attributed to the coincidence of soot and SO2.     

Conformation and luminescence of isolated molecular semiconductor molecules

In this article, we describe, for the first time, direct comparisons of the detailed structures of two small molecule organic semiconductors, oligo(phenylenvinylene) (OPV) molecules with chains of five and six phenyl rings (5R-OC(8)H(17) and 6R-OC(8)H(17)), respectively, and their luminescence properties on a single molecule level. Our data originate from a combination of two powerful diagnostic tools in physical chemistry: ion mobility and single molecule fluorescence spectroscopy. These techniques enable us to precisely determine the shapes of isolated molecules in the gas phase and to correlate these structures to the emission from single molecules supported on bare glass substrates. The principal structural uncertainty in OPVs is the (possible) presence and location of cis-vinylene linkages (cis-defects) in the oligomer. The results show that the structures observed in the gas phase are strongly correlated to the categories of molecules observed in the single molecule polarization anisotropy measurements with nearly identical distributions for the two OPV molecules studied. Each category is also characterized by the luminescence efficiency of the molecules in each class, providing a direct correlation between the luminescence efficiency and the shape of the molecule. This combination of techniques provides a level of information far beyond that obtained via any other analytical technique.     

A liquid chromatography/electrospray ionization-tandem mass spectrometry method for quantification of specific organophosphorus pesticide biomarkers in human urine

Organophosphorus pesticides are commonly used in both agricultural and residential settings. The widespread use of these chemicals makes it almost impossible for humans to avoid exposure. In order to determine background human exposure, there is a need for fast, reliable, and sensitive analytical methods. We have developed a sensitive method to quantify specific biomarkers of the organophosphorus pesticides acephate, azinphos, chlorpyrifos, coumaphos, diazinon, isazofos, malathion, methamidophos, parathion and pirimiphos or their O,O-dimethyl analogues in human urine, as their selective metabolites or as the intact pesticide. Isotopically labeled internal standards were used for eight of the analytes. The use of labeled internal standards in combination with high-performance liquid chromatography electrospray ionization–tandem mass spectrometry provided a high degree of specificity. Repeated analysis of urine samples fortified with high and low concentrations of the analytes gave relative standard deviations (RSD) of less than 10% for the analytes with an isotopically labeled standard. Analytes without isotopically labeled standards had higher RSD. For all compounds except methamidophos and acephate, the recoveries were greater than 70%. The limits of quantification for most of the analytes were in the range of 0.1 to 1 ng/mL. We detected concentrations of most of these pesticides and/or their metabolites in urine samples from non-occupationally exposed persons using our method. Our frequencies of detection for the analytes measured ranged from 1% to 98%.     

3β‐(Stearyloxy)olean‐12‐ene from Austroplenckia populnea: Structure Elucidation by 2D‐NMR and Quantitative 13C‐NMR Spectroscopy

3β‐(Stearyloxy)olean‐12‐ene was isolated from a hexane extract of Austroplenckia populnea Reiss (Celastraceae) leaves. The structure was solved by means of quantitative ¹³C‐NMR, HMBC, HMQC, COSY, NOESY, and NOE difference spectra. The mass spectrum showed an [M+1]⁺ ion peak at m/z 693, and the molecular formula C₄₈H₈₄O₂ was confirmed by combustion analysis.     

Comparisons of NMR spectral quality and success in crystallization demonstrate that NMR and X-ray crystallography are complementary methods for small protein structure determination

X-ray crystallography and NMR spectroscopy provide the only sources of experimental data from which protein structures can be analyzed at high or even atomic resolution. The degree to which these methods complement each other as sources of structural knowledge is a matter of debate; it is often proposed that small proteins yielding high quality, readily analyzed NMR spectra are a subset of those that readily yield strongly diffracting crystals. We have examined the correlation between NMR spectral quality and success in structure determination by X-ray crystallography for 159 prokaryotic and eukaryotic proteins, prescreened to avoid proteins providing polydisperse and/or aggregated samples. This study demonstrates that, across this protein sample set, the quality of a protein's [15N-1H]-heteronuclear correlation (HSQC) spectrum recorded under conditions generally suitable for 3D structure determination by NMR, a key predictor of the ability to determine a structure by NMR, is not correlated with successful crystallization and structure determination by X-ray crystallography. These results, together with similar results of an independent study presented in the accompanying paper (Yee, et al., J. Am. Chem. Soc., accompanying paper), demonstrate that X-ray crystallography and NMR often provide complementary sources of structural data and that both methods are required in order to optimize success for as many targets as possible in large-scale structural proteomics efforts.     

Adamantane-like cluster complexes of mixed-valent copper-copper and nickel-copper thiolates

Square-planar copper(II) and nickel(II) derivatives of the cis-dithiolate N(2)S(2) ligand bis(N,N'-2-mercapto-2-methylpropyl)-1,5-diazocyclooctane, (bme*daco)M, nucleate four Cu(I)Cl moieties, forming M(II)(2)Cu(I)(4)S(4) clusters with unusual triply bridging thiolates, mu(3)-SR, in the topological form of adamantane. As determined by X-ray crystallography, the (bme*daco)M (M = Cu or Ni) metallothiolate serves as a bidentate ligand that bridges four Cu(I) ions, utilizing all lone pairs on sulfurs. Further characterization by electrochemical and electronic spectral measurements suggests greater electron delocalization in the all-copper complex as compared to the NiCu heterometallic complex. Mass spectral data imply that the mixed-metal Ni(II)(2)Cu(I)(4)S(4) is more stable toward CuCl loss than Cu(II)(2)Cu(I)(4)S(4), a result that is corroborated by extraction of Cu(I) by 1,2-bis(diphenylphosphino)ethane in the latter but not the former.     

Adsorption of anionic dyes on chitosan beads. 1. The influence of the chemical structures of dyes and temperature on the adsorption kinetics

In this work, chitosan beads were synthesized in acidic medium and cross-linked in 1% glutaraldehyde solution. The characterization of the materials using TG/DTG, XRD, and BET surface areas showed that the beads did not modify their characteristics after the cross-linking reaction. The cross-linked beads were utilized as adsorbents for the removal of the yellow-, blue-, and red-anionic reactive dyes from aqueous solutions at pH 2.0. Adsorption of the yellow-dye increased from 25 to 50 degrees C. However, adsorption of the blue-dye decreased from 25 to 50 degrees C. Interestingly, the adsorption of the red-dye decreased from 25 to 35 degrees C and increased from 45 to 50 degrees C. The kinetic data were evaluated using an Avrami kinetic model, where the parameter n was related to the determination of changes in the adsorption mechanisms. Adsorption data of the dyes in relation to the contact time, the chemical structures of the dyes, and temperature were presented and were discussed.     

Effect of oil substitution in chiral microemulsion electrokinetic chromatography

In a previous publication (Pascoe, R., Foley, J. P., Analyst 2002, 127, 710-714), a novel chiral microemulsion based on 1.0% w/v dodecoxycarbonylvaline (DDCV), 0.50% v/v ethyl acetate and 1.2% v/v 1-butanol, was shown to provide rapid enantiomeric separations of various pharmaceutical compounds. The two deficiencies noted with this method were that the peak shapes obtained were asymmetric and the efficiencies were lower than those previously obtained using DDCV micelles (Peterson, A. G., Ahuja, E. S., Foley, J. P., J. Chromatogr. B 1996, 683, 15-28). This study examines the use of three alternative low-interfacial-tension oils (methyl acetate, methyl propionate, and methyl formate), in combination with DDCV, to characterize their effect on the elution range, efficiency, resolution, and enantioselectivity of various pharmaceutical enantiomers. The oils were evaluated in both the same volume percentage and the same molar concentration as ethyl acetate in the original DDCV microemulsion system. Including ethyl acetate, a total of seven microemulsion systems were examined. For the compounds that were separated, average enantioselectivities ranged from 1.09 to 1.28, with corresponding efficiencies of 14,000-20,000. While some interesting differences were observed, ethyl acetate still proved to be the most advantageous in terms of enantioselectivity, resolution, and elution range.     

Biosensor based on paraffin/graphite modified with sweet potato tissue for the determination of hydroquinone in cosmetic cream in organic phase

An organic-phase biosensor based on paraffin/graphite modified with sweet potato (Ipomoea batatas (L.) Lam.) tissue as the source of peroxidase was developed and used for determining hydroquinone in cosmetic creams. This enzyme in the presence of hydrogen peroxide catalyses the oxidation of hydroquinone to p-quinone which electrochemical reduction back to hydroquinone was obtained at a peak potential of -0.22 V. The recovery of hydroquinone from two samples ranged from 99.1 to 104.1% and a rectilinear analytical curve for hydroquinone concentration from 7.5x10(-5) to 1.6x10(-3) M (r=0.9991) were obtained. The detection limit was 8.1x10(-6) M and relative standard deviation was <1.0% for a solution containing 7.3x10(-4) M hydroquinone and 1.0x10(-3) M hydrogen peroxide in 0.10 M tetrabutylammonium bromide methanol-phosphate buffer solution (95:5% v/v) (n=10). The results obtained for hydroquinone in cosmetic creams using the proposed biosensor are in close agreement with those obtained using a Pharmacopoeia procedure at the 95% confidence level.     

Remote Raman and fluorescence studies of mineral samples

In the present study, we investigated remote laser-induced fluorescence (LIF), at a distance of 4.8 m, of a variety of natural minerals and rocks, and Hawaiian Ti (Cordyline terminalis) plant leaves. These minerals included calcite cleavage, calcite onex and calcite travertine, gypsum, fluorapatite, Dover flint and chalk, chalcedony and nephelene syenite, and rubies containing rock. Pulsed laser excitation of the samples at 355 and 266 nm often resulted in strong fluorescence. The LIF bands in the violet-blue region at approximately 413 and approximately 437 nm were observed only in the spectrum of calcite cleavage. The green LIF bands with band maxima in the narrow range of approximately 501-504 nm were observed in the spectra of all the minerals with the exception of the nephelene syenite and ruby rocks. The LIF red bands were observed in the range approximately 685-711 nm in all samples. Excitation with 532 nm wavelength laser gave broad but relatively low fluorescence background in the low-frequency region of the Raman spectra of these minerals. One microsecond signal gating was effective in removing nearly all background fluorescence (with peak at approximately 610 nm) from calcite cleavage Raman spectra, indicating that the fluorescence was probably from long-lifetime inorganic phosphorescence.