Adamantane-like cluster complexes of mixed-valent copper-copper and nickel-copper thiolates

Square-planar copper(II) and nickel(II) derivatives of the cis-dithiolate N(2)S(2) ligand bis(N,N'-2-mercapto-2-methylpropyl)-1,5-diazocyclooctane, (bme*daco)M, nucleate four Cu(I)Cl moieties, forming M(II)(2)Cu(I)(4)S(4) clusters with unusual triply bridging thiolates, mu(3)-SR, in the topological form of adamantane. As determined by X-ray crystallography, the (bme*daco)M (M = Cu or Ni) metallothiolate serves as a bidentate ligand that bridges four Cu(I) ions, utilizing all lone pairs on sulfurs. Further characterization by electrochemical and electronic spectral measurements suggests greater electron delocalization in the all-copper complex as compared to the NiCu heterometallic complex. Mass spectral data imply that the mixed-metal Ni(II)(2)Cu(I)(4)S(4) is more stable toward CuCl loss than Cu(II)(2)Cu(I)(4)S(4), a result that is corroborated by extraction of Cu(I) by 1,2-bis(diphenylphosphino)ethane in the latter but not the former.     

Identification of the pathological prion protein allotypes in scrapie-infected heterozygous bank voles (Clethrionomys glareolus) by high-performance liquid chromatography-mass spectrometry

Cerebral formation of the pathological isoform of the prion protein (PrP) is a crucial molecular event in prion diseases. The bank vole (Clethrionomys glareolus) is a rodent species highly susceptible to natural scrapie. The PrP gene of bank vole is polymorphic (Met/Ile) at codon 109. Here we show that homozygous 109Met/Met voles have incubation times shorter than heterozygous 109Met/Ile voles after experimental challenge with three different scrapie isolates. An HPLC-MS/MS method was optimized and applied to investigate whether in heterozygous animals both PrP allotypes are able to undergo pathological conversion. The results demonstrate that both allotypes of the prion protein participate to pathological deposition.     

Effect of oil substitution in chiral microemulsion electrokinetic chromatography

In a previous publication (Pascoe, R., Foley, J. P., Analyst 2002, 127, 710-714), a novel chiral microemulsion based on 1.0% w/v dodecoxycarbonylvaline (DDCV), 0.50% v/v ethyl acetate and 1.2% v/v 1-butanol, was shown to provide rapid enantiomeric separations of various pharmaceutical compounds. The two deficiencies noted with this method were that the peak shapes obtained were asymmetric and the efficiencies were lower than those previously obtained using DDCV micelles (Peterson, A. G., Ahuja, E. S., Foley, J. P., J. Chromatogr. B 1996, 683, 15-28). This study examines the use of three alternative low-interfacial-tension oils (methyl acetate, methyl propionate, and methyl formate), in combination with DDCV, to characterize their effect on the elution range, efficiency, resolution, and enantioselectivity of various pharmaceutical enantiomers. The oils were evaluated in both the same volume percentage and the same molar concentration as ethyl acetate in the original DDCV microemulsion system. Including ethyl acetate, a total of seven microemulsion systems were examined. For the compounds that were separated, average enantioselectivities ranged from 1.09 to 1.28, with corresponding efficiencies of 14,000-20,000. While some interesting differences were observed, ethyl acetate still proved to be the most advantageous in terms of enantioselectivity, resolution, and elution range.     

Remote Raman and fluorescence studies of mineral samples

In the present study, we investigated remote laser-induced fluorescence (LIF), at a distance of 4.8 m, of a variety of natural minerals and rocks, and Hawaiian Ti (Cordyline terminalis) plant leaves. These minerals included calcite cleavage, calcite onex and calcite travertine, gypsum, fluorapatite, Dover flint and chalk, chalcedony and nephelene syenite, and rubies containing rock. Pulsed laser excitation of the samples at 355 and 266 nm often resulted in strong fluorescence. The LIF bands in the violet-blue region at approximately 413 and approximately 437 nm were observed only in the spectrum of calcite cleavage. The green LIF bands with band maxima in the narrow range of approximately 501-504 nm were observed in the spectra of all the minerals with the exception of the nephelene syenite and ruby rocks. The LIF red bands were observed in the range approximately 685-711 nm in all samples. Excitation with 532 nm wavelength laser gave broad but relatively low fluorescence background in the low-frequency region of the Raman spectra of these minerals. One microsecond signal gating was effective in removing nearly all background fluorescence (with peak at approximately 610 nm) from calcite cleavage Raman spectra, indicating that the fluorescence was probably from long-lifetime inorganic phosphorescence.     

Detection of hazelnut oil in virgin olive oil by assessment of free sterols and triacylglycerols

Free sterols were evaluated as factors for discriminating between genuine virgin olive oil and hazelnut-mixed virgin olive oil. Numeric analyses of the results amplified the differences between groups. The application of this method to virgin olive oil samples and their mixtures with 10% hazelnut oil distinguished between genuine and nongenuine virgin olive oil with statistical certainty. Triacylglycerol analysis was tested for the same purpose by using parameter deltaECN42, but although it possessed a discriminating capacity, it alone could not distinguish the aforementioned groups with sufficient certainty. Free delta7-sterols data were combined with deltaECN42 data into a single discriminating function to improve differentiation and bring more ruggedness, and for detection of low amounts (10%) of hazelnut oil in virgin olive oil. In fact, the values obtained by addition of delta7-sterol data and deltaECN42 data showed a higher discriminating capacity than single parameters. In a single operation the method produced all the oil fractions necessary for analysis of free sterols and triacylglycerols with ECN42. Solid-phase extraction was applied in substitution of traditional chromatography on a silica column.     

Uranium analysis in urine by inductively coupled plasma dynamic reaction cell mass spectrometry

Urine uranium concentrations are the best biological indicator for identifying exposure to depleted uranium (DU). Internal exposure to DU causes an increased amount of urine uranium and a decreased ratio of ²³⁵U/²³⁸U in urine samples, resulting in measurements that vary between 0.00725 and 0.002 (i.e., natural and depleted uraniums ²³⁵U/²³⁸U ratios, respectively). A method based on inductively coupled plasma dynamic reaction cell mass spectrometry (ICP-DRC-MS) was utilized to identify DU in urine by measuring the quantity of total U and the ²³⁵U/²³⁸U ratio. The quantitative analysis was achieved using ²³³U as an internal standard. The analysis was performed both with and without the reaction gas oxygen. The reaction gas converted ionized ²³⁵U⁺ and ²³⁸U⁺ into ²³⁵UO₂⁺ (m/z=267) and ²³⁸UO₂⁺ (m/z=270). This conversion was determined to be over 90% efficient. A polyatomic interference at m/z 234.8 was successfully removed from the ²³⁵U signal under either DRC operating conditions (with or without oxygen as a reaction gas). The method was validated with 15 urine samples of known uranium compositions. The method detection limit for quantification was determined to be 0.1 pg U mL^–1 urine and an average coefficient of variation (CV) of 1–2% within the sample measurements. The method detection limit for determining ²³⁵U/²³⁸U ratio was 3.0 pg U mL^–1 urine. An additional 21 patient samples were analyzed with no information about medical history. The measured ²³⁵U/²³⁸U ratio within the urine samples correctly identified the presence or absence of internal DU exposure in all 21 patients.The opinions and assertions expressed herein are those of the authors and are not to be construed as official or as representing the views of the Armed Forces Institute of Pathology, the Department of the Army, or the Department of Defense     

A new thermoelectric material: CsBi4Te6

The highly anisotropic material CsBi(4)Te(6) was prepared by the reaction of Cs/Bi(2)Te(3) around 600 degrees C. The compound crystallizes in the monoclinic space group C2/m with a = 51.9205(8) A, b = 4.4025(1) A, c = 14.5118(3) A, beta = 101.480(1) degrees, V = 3250.75(11) A(3), and Z = 8. The final R values are R(1) = 0.0585 and wR(2) = 0.1127 for all data. The compound has a 2-D structure composed of NaCl-type [Bi(4)Te(6)] anionic layers and Cs(+) ions residing between the layers. The [Bi(4)Te(6)] layers are interconnected by Bi-Bi bonds at a distance of 3.2383(10) A. This material is a narrow gap semiconductor. Optimization studies on the thermoelectric properties with a variety of doping agents show that the electrical properties of CsBi(4)Te(6) can be tuned to yield an optimized thermoelectric material which is promising for low-temperature applications. SbI(3) doping resulted in p-type behavior and a maximum power factor of 51.5 microW/cm.K(2) at 184 K and the corresponding ZT of 0.82 at 225 K. The highest power factor of 59.8 microW/cm.K(2) at 151 K was obtained from 0.06% Sb-doped material. We report here the synthesis, physicochemical properties, doping characteristics, charge-transport properties, and thermal conductivity. Also presented are studies on n-type CsBi(4)Te(6) and comparisons to those of p-type.     

The combinatorial game Nofil played on Steiner triple systems

We introduce an impartial combinatorial game on Steiner triple systems called Next One to Fill Is the Loser (Nofil ). Players move alternately, choosing points of the triple system. If a player is forced to fill a block on their turn, they lose. By computing nim-values, we determine optimal strategies for Nofil on all Steiner triple systems up to order 15 and a sampling for orders 19, 21 and 25. The game Nofil can be thought of in terms of play on a corresponding hypergraph which will become a graph during play. At that point Nofil is equivalent to playing the game Node Kayles on the graph. We prove necessary conditions and sufficient conditions for a graph to reached playing Nofil. We conclude that the complexity of determining the outcome of the game Nofil on Steiner triple systems is PSPACE-complete for randomized reductions.     

Formation and nitration heats for 3-nitro-4-chloro- and 3,5-dinitro-4-chloro-benzotrifluoride. Dinitration reaction investigation

Although various authors have determined the heats of combustion of many halogen derivatives we still do not have at our disposal data concerning the 3-nitro-4-chlorobenzotrifluoride and the 3,5-dinitro-4-chlorobenzotrifluoride.The object of this study has been that of determining the thermochemical constants for the above mentioned compounds. The values of the heats of combustion and of formation have been determined experimentally and from them the heats of nitration. These data and those determined with Handrick's method (group's energy contribution) have been compared with the heats of reaction carrying the nitration into an adiabatic system.Afterwards it has been investigated how to get the maximum output for the dinitro production. Data and considerations are reported.     

Suppression of non-specific adsorption using sheath flow

The use of a confining sheath fluid within a microfluidic channel in order prevent non-specific adsorption of analytes to the walls of microchannels is demonstrated. A sheath-flow channel fabricated using laser cutting of Mylar films is developed. Numerical simulations of convective and diffusive mass transport within the channel are presented. The device is characterized experimentally using epifluorescence microscopy. It is demonstrated that the device is capable of preventing the adsorption of Rhodamine B to the walls of the channel for a period that would allow for adsorption-free T-sensor measurements to be made within the core of the flow channel. Generalized scaling rules based on the diffusion coefficient, sheath thickness and affinity of the potential adsorbant for the surface material are discussed. The controlled adsorption of the protein bovine serum albumin (BSA) to a gold surface is also demonstrated using SPR microscopy.