Isothermal crystallization of concentrated amorphous starch systems measured by modulated differential scanning calorimetry

The slow isothermal crystallization of concentrated amorphous starch systems is measured by Modulated Differential Scanning Calorimetry (MDSC). It can be followed continuously by the evolution (stepwise decrease) of the MDSC heat capacity signal (Cp), as confirmed with data from X-ray diffractometry, Dynamic Mechanical Analysis, Raman spectroscopy, and conventional Differential Scanning Calorimetry. Isothermal MDSC measurements enable a systematic study of the slow crystallization process of a concentrated starch system, such as a pregelatinized waxy corn starch with 24 wt % water and 76 wt % starch. After isothermal crystallization, a broad melting endotherm with a bimodal distribution is observed, starting about 10°C beyond the crystallization temperature. The bulk glass transition temperature (T_g) decreases about 15°C during crystallization. The isothermal crystallization rate goes through a maximum as a function of crystallization time. The maximum rate is characterized by the time at the local extreme in the derivative of Cp (t_max), or by the time to reach half the decrease in Cp (t_1/2). Both t_max and t_1/2 show a bell-shaped curve as a function of crystallization temperature. The temperature of maximum crystallization rate, for the system studied, lies as high as 75°C. This is approximately 65°C above the initial value of T_g. Normalized Cp curves indicate the temperature dependence of the starch crystallization mechanism. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2881–2892, 1999     

Quantum spin Hall effect in graphene

We study the effects of spin orbit interactions on the low energy electronic structure of a single plane of graphene. We find that in an experimentally accessible low temperature regime the symmetry allowed spin orbit potential converts graphene from an ideal two-dimensional semimetallic state to a quantum spin Hall insulator. This novel electronic state of matter is gapped in the bulk and supports the transport of spin and charge in gapless edge states that propagate at the sample boundaries. The edge states are nonchiral, but they are insensitive to disorder because their directionality is correlated with spin. The spin and charge conductances in these edge states are calculated and the effects of temperature, chemical potential, Rashba coupling, disorder, and symmetry breaking fields are discussed.     

Continuum theory for nanotube piezoelectricity

We develop and solve a continuum theory for the piezoelectric response of one-dimensional nanotubes and nanowires, and apply the theory to study electromechanical effects in boron-nitride nanotubes. We find that the polarization of a nanotube depends on its aspect ratio, and a dimensionless constant specifying the ratio of the strengths of the elastic and electrostatic interactions. The solutions of the model as these two parameters are varied are discussed. The theory is applied to estimate the electric potential induced along the length of a boron-nitride nanotube in response to a uniaxial stress.     

Influence of temperature and UV intensity on photo-polymerization reaction studied by photo-DSC

Photo-DSC was used to investigate the cure kinetics of a photo-initiated resin. The exothermal photo-polymerization reactions were performed in isothermal mode. The irradiation of photo-initiated resin was studied under different conditions of temperature, UV lamp intensity, and reaction atmosphere (nitrogen and air). The results obtained by photo-DSC allowed us to determine kinetic data of the photo-polymerized reactions: the global activation energy and reaction enthalpy, and the conversion as a function of time and temperature. Modulated temperature DSC measurements were carried out to verify whether vitrification occurs during polymerization. The conversion at the top and bottom of irradiated samples was obtained by FT-IR spectroscopy before and after photo-polymerization. A non-homogenous photo-polymerization into the material was observed, probably because of the light absorptions effects within the uppermost layers.     

Synthesis of bislactones catalysed by a Pd–dppb system

Palladium acetate [Pd(OAc)₂] and 1,4‐bis(diphenylphosphino)butane (dppb) catalyse regioselective cyclocarbonylation of bisallyl derivatives of bisphenols affording seven‐membered ring bislactones in good yields. Double cyclocarbonylation reactions carried out using different conditions afforded bislactones with two different ring sizes (7–6 and 7–5‐­membered). Copyright © 2000 John Wiley & Sons, Ltd.     

Photocontrolled variations in the wetting capability of photochromic polymers enhanced by surface nanostructuring

The wetting characteristics of surfaces of polymers doped with photochromic spiropyran molecules can be tuned when irradiated with laser beams of properly chosen photon energy. The hydrophilicity is enhanced upon UV laser irradiation since the embedded nonpolar spiropyran molecules convert to their polar merocyanine isomers. The process is reversed upon green laser irradiation. Structuring of the photochromic polymeric surfaces with soft lithography enhances significantly the hydrophobicity of the system, indicating that the water droplets on the patterned features interact with air that is trapped in the microcavities, thus creating superhydrophobic air-water contact areas. Furthermore, the light-induced wettability variations of the structured surfaces are enhanced by a factor of 3 compared to those on the flat surfaces. This significant enhancement is attributed to the photoinduced reversible volume changes to the imprinted gratings, which additionally contribute to the wettability changes due to the light-induced photochromic interconversions.     

Have flagella a preferred orientation during early stages of biofilm formation?: AFM study using patterned substrates

Biofilm development involves several stages and flagellar expression of bacteria is considered an important factor in this process. However, its role in the earliest stage of biofilm development is not yet clear. In order to analyse this topic, Pseudomonas fluorescens samples were trapped on a patterned gold surface with sub-microtrenches (ST) so as to hinder their motility, and nanostructured gold with random orientation (SR) was used as control substrate. Atomic force microscopic (AFM) observations were made on untreated samples. Initially, ca. 75% of the flagella on ST and 85% of flagella on SR are oriented towards the neighbouring bacteria. Some of them made contact and surrounded the cells. Subsequently, 2-D raft structures formed on SR inert substrates with lateral curly flagella, while those at the poles of the rafts turned towards the nearest cell group. A few flagella and the formation of 3-D bacterial structures were observed on toxic substrates like copper. Results showed that patterned substrates are suitable tools to detect the orientation of flagella in the earliest stage of biofilm formation on solid opaque surfaces avoiding sample pre-treatment.