Determination of heptacaine hydrochloride in solution using nuclear analytical methods

The applicability of two nuclear analytical methods for the determination of hepatacaine hydrochloride in solution was studied, i. e. radionuclide X-ray fluorescence analysis and radiometric titrations based on precipitate formations. Methods used were evaluated on the basis of obtained sensitivity values.     

Rapid determination of protein in plant material by flow injection spectrophotometry with trinitrobenzenesulfonic acid

The rapid determination of protein in plant material based on spectrophotometric determination of amino acids in protein hydrolysates with trinitrobenzenesulfonic acid has been adapted to flow injection analysis. With the manifold described, a routine sampling rate of 120 samples/h is possible, though this, as well as sensitivity, can easily be varied. The method was calibrated against the Kjeldahl method and a good correlation was obtained between the two methods over a wide range of protein values for beans.     

The infrared spectra and normal coordinate analysis of syn and anti acetaldoxime

The infrared spectra of mixtures of syn and anti acetaldoxime and its deuterated analogues CH₃CHNOD, CD₃CHNOH, CD₃CDNOH and CH₃CDNOH have been recorded. The syn and anti isomers of CH₃CHNOH, CD₃CHNOH, CD₃CDNOH and CH₃CDNOH have been separated by gas chromatography [1]. The infrared spectra of separated isomers in CS₂ solution have been recorded and the assignment of ten in-plane vibrations made. From a normal coordinate analysis the Urey-Bradley force field, the potential energy distribution and additional information about assignments have been obtained.For the anti isomer the simple Urey-Bradley force field gives satisfactory agreement between the calculated and measured frequencies. For the syn isomer it is necessary to take into account the interactions between atoms separated by three bonds.     

Metallophthalocyanines with rod-shaped substituents

4-(4′-Dioctylaminocarbonylbiphenyloxy) phthalonitrile was synthesized from 4-(4′-carboxybiphenyloxy)phthalonitrile and dioctylamine in the presence of Et₃N. Metallophthalocyanines (Zn, Co and Cu) substituted with four dioctylaminocarbonyl biphenyloxy groups on the peripheral positions were prepared from 4-(4′-dioctylaminocarbonylbiphenyloxy)phthalonitrile and the corresponding divalent metal salts (Zn(CH₃COO)₂, CoCl₂ and CuCl₂). The new phthalocyanines are soluble in common organic solvents. These compounds were characterised by ¹H-NMR, ¹³C-NMR, FT-IR, UV-Vis and mass spectroscopies.     

Use of Uracil Thin Layer for Measuring Biologically Effective UV Dose

Abstract— Dimerization of uracil monomers in a polycrystalline state by UV radiation changes the absorption characteristics of a thin layer of the material. The change in optical density, measured by spectrophotometry in the250–400 nm range, as a function of the exposure time is evaluated in terms of the biologically effective UV dose. A statistical evaluation of a great number of uracil dosimeters irradiated with a TL01 lamp from Philips establishes the possibility of evaluating the biologically effective UV dose using a uracil dosimeter. Nonlinear regression procedures were introduced to correct the absorption spectra for contributions due to light scattering and to determine the optical density values required to calculate the UV dose expressed in H^Uunits. Comparison of cumulative daily doses and long-term monitoring measured by the uracil thin-layer dosimeter and a phage T7 dosimeter are given, which allow the determination of conversion factors between various biological dosimeters under different irradiation conditions.     

New liquid chromatographic-chemometric approach for the determination of sunset yellow and tartrazine in commercial preparation

A new liquid chromatographic (LC)-chemometric approach was developed for the determination of sunset yellow (SUN) and tartrazine (TAR) in commercial preparations. This approach uses LC and chemometric calibration methods, i.e., classical least-squares (CLS), principal component regression (PCR), and partial-least squares (PLS), simultaneously. The combined LC-chemometric approaches, denoted as LC-CLS, LC-PCR, and LC-PLS, are based on photodiode array (PDA) detection at multiple wavelengths. Optimum chromatographic separation of SUN and TAR with allura red as the internal standard (IS) was obtained by using a Waters Symmetry C18 column, 5 microm, 4.6 x 250 mm, and 0.2 M acetate buffer (pH 5)-acetonitrile-methano-bidistilled water (55 + 20 + 15 + 10, v/v) as the mobile phase at a flow rate of 1.9 mL/min. The LC data sets consisting of the ratios of analyte peak areas to the IS peak area were obtained by using PDA detection at 5 wavelengths (465, 470, 475, 480, and 485 nm). LC-chemometric calibrations for SUN and TAR were separately constructed by using the relationship between the peak-area ratio and the training sets for each colorant. LC-chemometric approaches were tested for different synthetic mixtures containing SUN and TAR in the presence of the IS. These LC-chemometric calibrations were applied to a commercial preparation of the 2 colorants. The experimental results of the LC-chemometric approaches were compared with those obtained by a developed classical LC method using single-wavelength detection.     

新试剂N-苯基-N′-(氨基对苯磺酸钠)硫脲的合成及其在微量金(Ⅲ)测定中的应用

介绍了新试剂N 苯基 N′ (氨基对苯磺酸钠 )硫脲 (PPT)的合成方法。并研究了与金的显色条件 ,建立了光度法测定微量金的新方法。在pH 5 .0～ 5 8的HAc NaAc缓冲体系中 ,在溴化十六烷基三甲胺 (CTMAB)存在下 ,Au(Ⅲ )与PPT形成组成比 1∶3的黄色水溶性络合物 ,其最大吸收峰位于 31 7.0nm ,表观摩尔吸光系数ε=3.68× 1 0 4 L/mol·cm ,Au(Ⅲ )含量在 0～ 80 μg/2 5mL范围内服从比尔定律。     

The application of levulinic acid and 5-nitro-2-furylmethylene diacetate in the total synthesis of some novel biologically active (5-nitro-2-furyl)azomethines

Summary The syntheses andin vitro antibacterial and antifungal evaluation of certain (5-nitro-2-furyl)azomethines with different heterocyclic nuclei are described.

---

Die Anwendung von Lävulinsäure und 5-Nitro-2-furylmethylendiacetat in der Totalsynthese einiger neuer biologisch aktiver (5-Nitro-2-furyl)azomethine

Zusammenfassung Es wird die Synthese und diein-vitro-antibakterielle und antifungale Wirksamkeit für bestimmte (5-Nitro-2-furyl)azomethine mit verschiedenen heterocyclischen Kernen beschrieben.

     

Core-valence correlation potentials based on density functional theory. Applications to valence-electron-only calculations on Na and K diatomics

The core-valence correlation potential has been derived for Na and K employing atomic calculations which make use of the density functional formula worked out by Lee, Yang and Parr based on Colle-Salvetti approach. The numerical potential is fitted with a small number of Gaussians leading to a very simple expression for an one-electron corevalence correlation operator? _cv . The core-valence correlation corrections can be computed by applying? _cv on a quite general class of wavefunctions. Applications of the? _cv operator within the framework of valence-electron-only calculations using effective Hamiltonians are presented for Na and K atoms, for Na₂, K₂, NaK and their cations. Almost all the corrections calculated for the physical properties due to the core-valence correlation lead to results which are in good agreement with those obtained from much more sophisticated treatments and experimental data.     

Surface properties of Reactive Yellow 2 immobilised pHEMA and HEMA/chitosan membranes: characterisation of their selectivity to different proteins

Poly(hydroxyethyl methacrylate), pHEMA, and a composite pHEMA/chitosan networks were synthesized in the membrane form via UV initiated photo-polymerisation in the presence of an initiator ,′-azoisobutyronitrile. Reactive Yellow 2 (RY-2) was covalently immobilised as a dye–ligand onto both membranes. The polarity and surface energy of the investigated membranes were determined by contact angle measurement. The incorporation of chitosan in the pHEMA networks produced more hydrophilic surface, as indicated by contact angle analysis. The binding characteristics of lysozyme, γ-globulins, human serum albumin (HSA) and bovine serum albumin (BSA) to pHEMA-RY-2 and pHEMA/chitosan-RY-2 affinity membranes have been investigated from aqueous solution and their dye–ligand free forms were used as control systems. When chitosan was incorporated in the pHEMA network as a cationic polymer led to higher adsorption capacity for the lysozyme. Selective adsorption behaviour was also observed in the case of pHEMA/chitosan-RY-2 membrane for the lysozyme. The non-specific adsorptions of the lysozyme on the pHEMA and pHEMA/chitosan membranes were about 1.9 and 7.2 mg/ml, respectively. These were negligible for all others investigated proteins. The lysozyme adsorption data was analysed using the first-order and the second-order models. The first-order equation in both affinity membrane systems is the most appropriate equation to predict the adsorption capacities of the adsorbents. The adsorption isotherms well fitted the combined Langmuir–Freundlich model. A theoretical analysis has been conducted to estimate the thermodynamic contributions (changes in enthalpy, entropy and Gibbs free energy) for the adsorption of lysozyme to both dye–ligand immobilised membranes. The adsorption capacities of both dye–ligand immobilised membranes increased with increasing the temperature while decreased with increasing the NaCl concentration. Both affinity membranes are stable when subjected to sanitization with sodium hydroxide after repeated separation–elution cycles.