trans-Bis(triphenylphosphin)phthalocyaninato(2–)rhenium(II): Synthese,Eigenschaften und Kristallstruktur

trans -Bis(triphenylphosphine)phthalocyaninato(2–)rhenium(II): Synthesis, Properties, and Crystal Structure Dirheniumheptoxide reacts with phthalodinitrile in boiling 1-chloronaphthalene and subsequent reprecipitation of the green raw product from conc. sulfuric acid to yield an oxo-phthalocyaninate of rhenium, which is reduced by molten triphenylphosphine forming dark green trans-bis(triphenylphosphine)phthalocyaninato(2–)rhenium(II), ^trans[Re(PPh₃)₂pc^2–]. The latter crystallizes triclinic in the space group P 1 with the cell parameters as follows: a = 11.512(2) Å, b = 12.795(2) Å, c = 12.858(2) Å, α = 64.42(2)°, β = 79.45(2)°, γ = 72.74(1)°; V = 1628.1(5); Z = 1. Re is in the centre of the (N_p)₄ plane (N_p: N1, N3) and coordinates two triphenylphosphine ligands axially in trans position. The average Re–N_p and Re–P distances are 2.007(1) and 2.516(3) Å, respectively. Despite the many extra bands the typical B, Q and N regions of the pc^2– ligand are observed at ca. 16500, 28900/32900 and 35300 cm^–1. A weak band group at ca. 8900 cm^–1 is attributed to a trip-multiplet transition, another one at ca. 14500 cm^–1 to a P → Re charge transfer. The vibrational spectra are dominated by internal vibrations of the pc^2– ligand. The very weak intensity of the IR bands at 905 and 1327 cm^–1 are diagnostic of the presence of Re^II.     

Gas chromatographic determination of aromatic amines in water samples after solid-phase extraction and derivatization with iodine: I. Derivatization

A new method for the selective determination of aromatic amines is presented, which is based on the solid-phase extraction at pH 9 and subsequent derivatization of the analytes to the corresponding iodobenzenes. These can selectively and sensitively be determined with gas chromatography and electron-capture detection. Separation of at least 30 compounds in a single chromatographic run in 30 min is possible. With this method, 56 aromatic amines were investigated, and only in six cases no derivatives were obtained. Limits of quantitation were between 0.5 and 8 μg l⁻¹, but may still be lowered with higher sample volumes or different injection techniques. The application to water samples revealed the suitability for the investigation of ground, leachate and wastewater.     

On the choice of active space orbitals in MCSCF calculations

We describe a procedure which may be used to aid selection of the active space in multiconfigurational self-consistent field (MCSCF) calculations for general chemical systems. Starting from a restricted Hartree-Fock calculation, we define a hierarchy of interacting virtual orbitals for every occupied orbital. The most strongly interacting orbitals are then taken to constitute the active space in a configuration interaction (CI) calculation. The natural orbital occupation numbers obtained from the CI calculation are then used to choose the active space to be used in a subsequent MCSCF calculation. We illustrate our method on a number of systems (Li₂, B₂, C₂, carbonyl oxide and the transition state for oxidation of H₂S by dioxirane). In all these cases, ‘intuitive’ active spaces are inadequate, as are active spaces derived from the natural orbitals of unrestricted Hartree-Fock calculations.     

2-Position base-modified analogues of adenophostin A as high-affinity agonists of the D-myo-inositol trisphosphate receptor: in vitro evaluation and molecular modeling

Adenophostin A (AdA) is a potent agonist of the d-myo-inositol 1,4,5-trisphosphate receptor (Ins(1,4,5)P3R). Various 2-aminopurine analogues of AdA were synthesized, all of which (guanophostin 5, 2,6-diaminopurinophostin 6, 2-aminopurinophostin 7, and chlorophostin 8) are more potent than 2-methoxy-N6-methyl AdA, the only benchmark of this class. The 2-amino-6-chloropurine nucleoside 11, from Vorbrüggen condensation of 2-amino-6-chloropurine with appropriately protected disaccharide, served as the advanced common precursor for all the analogues. Alcoholysis provided the precursor for 5, ammonolysis at high temperature the precursor for 6, and ammonolysis under mild conditions the precursor for synthesis of 7 and 8. For 8, the debenzylation of precursor leaving the chlorine untouched was achieved by judicious use of BCl3. The reduced potency of chlorophostin 8 and higher potency of guanophostin 5 in assays of Ca2+ release via recombinant Ins(1,4,5)P3R are in agreement with our model suggesting a cation-pi interaction between AdA and Ins(1,4,5)P3R. The similar potencies of 2,6-diaminopurinophostin (6) and 2-aminopurinophostin (7) concur with previous reports that the 6-NH2 moiety contributes negligibly to the potency of AdA. Molecular modeling of the 2-amino derivatives suggests an interaction between the carboxylate side chain of Glu505 of the receptor and the 2-NH2 of the ligand, but for 2-methoxy-N6-methyl AdA the carboxylate group of Glu505 is deflected away from the methoxy group. A helix-dipole interaction between the 1-phosphate of Ins(1,4,5)P3 and the 2'-phosphate of AdA with alpha-helix 6 of Ins(1,4,5)P3R is postulated. The results support a proposed model for high-affinity binding of AdA to Ins(1,4,5)P3R.     

Photochemical Reactions in the Synthesis of Protein–Drug Conjugates

The ability to modify biologically active molecules such as antibodies with drug molecules, fluorophores or radionuclides is crucial in drug discovery and target identification. Classic chemistry used for protein functionalisation relies almost exclusively on thermochemically mediated reactions. Our recent experiments have begun to explore the use of photochemistry to effect rapid and efficient protein functionalisation. This article introduces some of the principles and objectives of using photochemically activated reagents for protein ligation. The concept of simultaneous photoradiosynthesis of radiolabelled antibodies for use in molecular imaging is introduced as a working example. Notably, the goal of producing functionalised proteins in the absence of pre-association (non-covalent ligand-protein binding) introduces requirements that are distinct from the more regular use of photoactive groups in photoaffinity labelling. With this in mind, the chemistry of thirteen different classes of photoactivatable reagents that react through the formation of intermediate carbenes, electrophiles, dienes, or radicals, is assessed.     

Size does matter! Label-free detection of small molecule–protein interaction

This review is focused on methods for detecting small molecules and, in particular, the characterisation of their interaction with natural proteins (e.g. receptors, ion channels). Because there are intrinsic advantages to using label-free methods over labelled methods (e.g. fluorescence, radioactivity), this review only covers label-free techniques. We briefly discuss available techniques and their advantages and disadvantages, especially as related to investigating the interaction between small molecules and proteins. The reviewed techniques include well-known and widely used standard analytical methods (e.g. HPLC-MS, NMR, calorimetry, and X-ray diffraction), newer and more specialised analytical methods (e.g. biosensors), biological systems (e.g. cell lines and animal models), and in-silico approaches.     

2-Aminopurine: a probe of structural dynamics and charge transfer in DNA and DNA:RNA hybrids

Spectroscopic techniques are employed to probe relationships between structural dynamics and charge transfer (CT) efficiency in DNA duplexes and DNA:RNA hybrids containing photoexcited 2-aminopurine (Ap). To better understand the variety of interactions and reactions, including CT, between Ap and DNA, the fluorescence behavior of Ap is investigated in a full series of redox-inactive as well as redox-active assemblies. Thus, Ap is developed as a dual reporter of structural dynamics and base-base CT reactions in nucleic acid duplexes. CD, NMR, and thermal denaturation profiles are consistent with the family of DNA duplexes adopting a distinct conformation versus the DNA:RNA hybrids. Fluorescence measurements establish that the d(A)-r(U) tract of the DNA:RNA hybrid exhibits enhanced structural flexibility relative to that of the d(A)-d(T) tract of the DNA duplexes. The yield of CT from either G or 7-deazaguanine (Z) to Ap in the assemblies was determined by comparing Ap emission in redox-active G- or Z-containing duplexes to otherwise identical duplexes in which the G or Z is replaced by inosine (I), the redox-inactive nucleoside analogue. Investigations of CT not only demonstrate efficient intrastrand base-base CT in the DNA:RNA hybrids but also reveal a distance dependence of CT yield that is more shallow through the d(A)-r(U) bridge of the A-form DNA:RNA hybrids than through the d(A)-d(T) bridge of the B-form DNA duplexes. The shallow distance dependence of intrastrand CT in DNA:RNA hybrids correlates with the increased conformational flexibility of bases within the hybrid duplexes. Measurements of interstrand base-base CT provide another means to distinguish between the A- and B-form helices. Significantly, in the A-form DNA:RNA hybrids, a similar distance dependence is obtained for inter- and intrastrand reactions, while, in B-DNA, a more shallow distance dependence is evident with interstrand CT reactions. These observations are consistent with evaluations of intra- and interstrand base overlap in A- versus B-form duplexes. Overall, these data underscore the sensitivity of CT chemistry to nucleic acid structure and structural dynamics.     

Germacrene A is a product of the aristolochene synthase-mediated conversion of farnesylpyrophosphate to aristolochene

The biosynthesis of several sesquiterpenes has been proposed to proceed via germacrene A. However, to date, the production of germacrene A has not been proven directly for any of the sesquiterpene synthases for which it was postulated as an intermediate. We demonstrate here for the first time that significant amounts of germacrene A (7.5% of the total amount of products) are indeed released from wild-type aristolochene synthase (AS) from Penicillium roqueforti. Germacrene A was identified through direct GC-MS comparison to an authentic sample and through production of beta-elemene in a thermal Cope rearrangement. AS also produced a small amount of valencene through deprotonation of C6 rather than C8 in the final step of the reaction. On the basis of the X-ray structure of AS, Tyr 92 was postulated to be the active-site acid responsible for protonation of germacrene A (Caruthers, J. M.; Kang, I.; Rynkiewicz, M. J.; Cane, D. E.; Christianson, D. W. J. Biol. Chem. 2000, 275, 25533-25539). The CD spectra of a mutant protein, ASY92F, in which Tyr 92 was replaced by Phe, and of AS were very similar. ASY92F was approximately 0.1% as active as nonmutated recombinant AS. The steady-state kinetic parameters were measured as 0.138 min(-1) and 0.189 mM for k(cat) and K(M), respectively. Similar to a mutant protein of 5-epi-aristolochene (Rising, K. A.; Starks, C. M.; Noel, J. P.; Chappell, J. J. Am. Chem. Soc. 2000, 122, 1861-1866), the mutant released significant amounts of germacrene A (approximately 29%). ASY92F also produced various amounts of a further five hydrocarbons of molecular weight 204, valencene, beta-(E)-farnesene, alpha- and beta-selinene, and selina-4,11-diene.