基于拉锥结构的全光纤型内窥OCT探针研究

本文报道了一种基于拉锥结构的全光纤型内窥光学相干层析成像探针. 基于大纤芯多模光纤的低光束发散特性, 使用大纤芯多模光纤代替透镜作为成像元件, 并在单模光纤与大纤芯多模光纤之间引入过渡拉锥段以减少插入损耗. 首先利用光学仿真软件(Rsoft)确定探针的最佳结构, 然后通过拉锥、切割以及熔接工艺实现探针制作, 并对探针的出射光束特性与插入损耗进行测量, 最后将该探针与扫频光学相干层析成像主系统联机, 对人体指尖皮肤及鸡气管壁组织进行成像. 该探针直径为250 μm, 不锈钢保护管外径为325 μm, 硬端长度1 cm, 插入损耗约为0.3 dB, 空气中有效成像范围达800 μm. 该探针为内窥光学相干层析成像技术在心血管疾病的应用提供了高紧凑度、高传输效率与高灵活性的选择.     

Recent progress on the mechanics of sharply bent DNA

Despite extensive studies on the mechanics of DNA under external constrains, such as tension, torsion, and bending, several important aspects have remained poorly understood. One biologically important example is the mechanics of DNA under sharp bending conditions, which has been debated for a decade without thorough comprehension. The debate is about the interesting phenomenon raised from a series of different experiments: sharply bent DNA has a surprisingly high apparent bending flexibility that deviates from the canonical bending elasticity of DNA. This finding has motivated various theoretical models, which mainly incorporate the excitation of mechanical defects inside severely bent DNA molecules. Here, we review the recent progress on the understanding of the mechanics of sharply bent DNA and provide our view on this important question by interrogating the theoretical foundation of these experimental measurements.     

Flux vector formulation for photon propagation in the biological tissue

We present a generalized delta-Eddington phase function to simplify the radiative transfer equation to an integral equation with respect to the photon flux vector. The solution of the integral equation is highly accurate to model the photon propagation in the biological tissue over a broad range of optical parameters, especially in the visible light spectrum where the diffusion approximation breaks down. The methodology is validated in the Monte Carlo simulation and can be applied in various optical imaging applications.     

Diode-side-pumped intracavity frequency-doubled Nd:YAG/BaWO4 Raman laser generating average output power of 3.14 W at 590 nm

We report a linear-cavity high-power all-solid-state Q-switched yellow laser. The laser source comprises a diode-side-pumped Nd:YAG module that produces 1064 nm fundamental radiation, an intracavity BaWO(4) Raman crystal that generates a first-Stokes laser at 1180 nm, and a KTP crystal that frequency doubles the first-Stokes laser to 590 nm. A convex-plane cavity is employed in this configuration to counteract some of the thermal effect caused by high pump power. An average output power of 3.14 W at 590 nm is obtained at a pulse repetition frequency of 10 kHz.     

新型嘧啶单环类非经典叶酸拮抗剂的合成及抗肿瘤活性研究

以课题组前期设计合成的非经典叶酸拮抗剂6-(4'-甲基苯乙基)-N5-氯乙酰基-2,4-二氨基哌啶并[3,2-d]嘧啶(wm-8.2)为先导化合物,将wm-8.2中的哌啶并嘧啶双环结构简化为嘧啶单环结构,以提高分子柔韧性并简化分子结构,根据6-位空间占位设计6-H和6-甲基两个系列,考察了不同桥链长度和不同芳香杂环侧链对抗肿瘤活性的影响.同时对具有叶酸抑制剂分子结构特征的关键中间体进行活性对比测定,研究了N(5)位氯乙酰基对活性的影响.两个系列目标化合物和关键中间体共36个化合物的结构均经1H NMR,13C NMR和MS确证.生物活性测定表明,6位为甲基的化合物中,具有三碳桥链及对甲基苯环侧链的6-甲基-2,4-二氨基-5-(N-(4-甲基苯基)丙基-N-(2-氯乙酰基))氨基嘧啶(6b-3)具有最好的HL-60、A549和HCT116细胞增殖抑制活性,IC50分别为0.25,0.83和0.63μmol?L^-1.化合物6b-3在N(5)位氯乙酰基取代之前的关键中间体6-甲基-2,4-二氨基-5-(N-(4-甲基苯基)丙基)氨基嘧啶(5b-3)具有最优的二氢叶酸还原酶抑制活性.总结了化合物的构效关系,并用计算机模拟进行了阐释.     

Glow Discharge Characteristics of Hollow Needle-Plate Electrode in Atmospheric Pressure ArgonSCIEI北大核心CSCD

Atmosphere pressure uniform plasma has the broad application prospect in the industrial field. Using hollow needle cathode - plate anode device excited by direct-current voltage, a uniform and stable glow discharge is generated at atmospheric pressure in ambient air with argon used as working gas. The influence of the experimental parameters (including gas flow rate and the gas gap width) on discharge has been investigated by optical method. It can be found that a glow-discharge plasma column can bridge the two electrodes. The plasma column is uniform, and no filaments can be discerned. Near the plate electrode, the diameter of the plasma column is largest of all positions. The maximal diameter of the plasma column increases with increasing the discharge current or the gas flow rate. Through electrical method, the voltage-current characteristic has been investigated. It has been found that the discharge voltage decreases with increasing the current which is similar with the characteristic of glow discharge in low pressure. It increases with increasing the gas gap width or the gas flow rate. By analyzing the optical emission spectrum scanning from 330 to 450 nm emitted from the direct-current glow discharge, the molecular vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 have been investigated as functions of the gas flow rate and gas gap width. Results indicate that both the vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 decrease with increasing the gas flow rate or the gas gap width. In addition, the molecular vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 have been investigated in spatial resolution along the direction of gas flow(plasma column axial), and give a qualitative analysis as well. It is found that the vibrational temperature and the average electron energy increase with increasing the distance from the hollow needle cathode. These results are important to the industrial applications of glow discharge.     

通过双Σ型激光方案控制振动态布居转移

通过使用含时量子波包方法,对HF分子该类型的布居转移动力学进行了研究. 提出双Σ型激光控制方案,用于控制布居从|v=16>能级向|v=0>能级进行转移. 该方案的第一步是将布居从|v=16>经过中间能级|v=11>向|v=7>转移,第二步是将布居从|v=7>经过中间能级|v=3>向|v=0>转移. 在每一个步骤中,三个振动能级在两束重叠的激光脉冲作用下形成一个Σ型的布居转移路径. 通过优化激光的强度、频率和延迟时间,得到了最大的布居转移效率. 计算并比较了正序脉冲和反序脉冲两种情况,在这两种情况下,布居都可以超过90%从|v=16>能级向|v=0>能级进行转移.     

Morphological transformations of nonequilibrium assemblies of amphiphilic diblock copolymer

Amphiphilic diblock copolymer polystyrene-block-poly(ethylene oxide) (PS-PEO) assembled into nonequilibrium bicontinuous structures or mixture of vesicles, bilayers and nanorods upon rapid micellization induced by rapid addition of selective solvent (water) into the PS-PEO solutions in a common solvent (dimethyl formamide) with different concentrations. These kinetically trapped assemblies were unstable and slowly evolved into thermodynamically favorable spheres and vesicles. The addition of non-ionic surfactant Pluronic P123 upon rapid micellization generated novel nanocages and flower-like vesicles. The nanocages spontaneously transformed into tubules capped with vesicles. These novel assemblies are beyond the classic phase diagram of block copolymer self-assemblies, especially for those primarily based on thermodynamics.