Highly sensitive miniature photonic crystal fiber refractive index sensor based on mode field excitation

A highly sensitive miniature photonic crystal fiber refractive index sensor based on field mode excitation is presented. The sensor is fabricated by melting one end of a photonic crystal fiber into a rounded tip and splicing and collapsing the other end with a single-mode fiber. The rounded tip is able to induce cladding mode excitation, which resulted in an additional phase delay. Linear response of 262.28 nm/refractive index unit in the refractive index range of 1.337 to 1.395 is obtained for the physical length of a 953 μm sensor. The sensor is also shown to be insensitive to environmental temperature.     

A rehabilitation training system with double-CCD camera and automatic spatial positioning technique

This study aimed to develop a computer game for machine vision integrated rehabilitation training system. The main function of the system is to allow users to conduct hand grasp-and-place movement through machine vision integration. Images are captured by a double-CCD camera, and then positioned on a large screen. After defining the right, left, upper, and lower boundaries of the captured images, an automatic spatial positioning technique is employed to obtain their correlation functions, and lookup tables are defined for cameras. This system can provide rehabilitation courses and games that allow users to exercise grasp-and-place movements, in order to improve their upper limb movement control, trigger trunk control, and balance training.     

Investigation of surface plasmon biosensing using gold nanoparticles enhanced ellipsometry

We present a label-free, nondestructive and high sensitivity biosensor by using the phase information of a gold nanoparticles enhanced ellipsometry signal. The refractive index (RI) resolution from ellipsometric phase information is of the order of 1.6×10(-6) RI units. Furthermore, spectroscopic and dynamic measurements show substantial change in the phase signal when biomolecules are coated on gold nanoparticles. The detection limit of our proposed technique is up to ～18?pM concentration of the target biomolecules.     

Optical phase modulators using deformable waveguides actuated by micro-electro-mechanical systems

An optical phase modulator is presented by using micro-electro-mechanical systems to actuate deformable silicon waveguides. Via mechanically stretching the waveguide length, the optical path is extended, resulting in a phase shift. The experimental results show that a phase shift of near 0.4π is achieved at 200 V for both TE- and TM-polarized waves by cascading six phase modulation units, agreeing well with the theoretical prediction. The power consumption is estimated to be smaller than 0.2 mW at 200 V, mainly resulting from the leakage current.     

Dual-mode operation of a twisted nematic liquid crystal cell by switching between dynamic and memory modes

We propose a twisted nematic liquid crystal device that can be operated in dynamic or memory mode, based on the information content to be displayed at that time. +90°-twisted and -90°-twisted states are used as two stable states for operation in the memory mode. A vertical electric field is applied to realize gray levels for operation in the dynamic mode. The proposed device has a memory retention time of over a month for the memory mode and a response time of 12 ms for the dynamic mode. Contrast ratios of over 500∶1 can be obtained in both the dynamic and memory modes.     

Stationary-fiber rotary probe with unobstructed 360° view for optical coherence tomography

A side-scanning fiber probe is a critical component for optical coherence tomography in medical imaging and diagnosis. We propose and fabricate an on-axis rotating probe that performs in situ, circumferential scanning that is shadow-free (not susceptible to shadow effects caused by the motor's wires). A miniature motor that incorporates a bored-out shaft for the optical fiber is located at the distal end of the probe, which results in a more stable and uniform circumferential scan, free from wire-shadow interference effects. More importantly, this design, novel to our knowledge, compared to other probes avoids the insertion losses introduced by optical coupling components and the multitude of optical interfaces, which is very important for sensing weak signals backscattered from structures deep in the tissue.     

Hybrid cable television and orthogonal-frequency-division-multiplexing transport system basing on single wavelength polarization and amplitude remodulation schemes

A hybrid community antenna television (CATV) and orthogonal-frequency-division-multiplexing (OFDM) transport system is proposed and experimentally demonstrated to transmit multiple CATV channels and bi-directional radio frequency signals on a single optical carrier. By polarization remodulating an optical CATV signal with downstream OFDM signals and then amplitude remodulating upstream OFDM signals with the hybrid CATV/OFDM signals, this architecture can efficiently utilize only one optical carrier to support optical analog/digital CATV transmission and bi-directional wireless broadband services for each client. Good experimental results prove that this architecture provides a proper wavelength utilization scheme for future multiwavelength optical transport systems.     

Angle-independent plasmonic infrared band-stop reflective filter based on the Ag/SiO₂/Ag T-shaped array

A plasmonic infrared (IR) filter assisted by localized surface plasmon polaritons (LSPPs) in a Ag/SiO?/Ag T-shaped array was theoretically and experimentally investigated. By using a Fourier transform infrared (FTIR) spectrometer, an angle-independent LSPP resonant mode caused by a Fabry-Pérot resonance in the structure was observed in agreement with the prediction from the rigorous coupled-wave analysis (RCWA) simulation. The resonant wavelength of the mode can also be controlled by modifying the geometry of the T-shaped structure. Such LSPP property can be used as an IR reflection-type band-stop filter with a single spectral bandwidth and an ultrahigh immunity to incident angles.     

Effect of surface nanocrystallization induced by fast multiple rotation rolling on hardness and corrosion behavior of 316L stainless steel

A nanostructured layer was fabricated by using fast multiple rotation rolling (FMRR) on the surface of 316L stainless steel. The microstructure in the surface was characterized by transmission electron microscopy and X-ray diffraction. The effects of FMRR on the microhardness, surface roughness and corrosion behavior of the stainless steel were investigated by microhardness measurements, surface roughness measurements, potentiodynamic polarization curves and pitting corrosion tests. The surface morphologies of pitting corrosion specimens were characterized by scanning electron microscopy. The results show that FMRR can cause surface nanocrystallization with the grain size ranges from 6 to 24 nm in the top surface layer of the sample. The microhardness of FMRR specimen in the top surface layer remarkably increases from 190 to 530 HV. However, the surface roughness slightly rises after FMRR treatment. The potentiodynamic polarization curves and pitting corrosion tests indicated that the FMRR treated 316L stainless steel with a surface nanocrystallized layer reduced the corrosion resistance in a 3.5% NaCl solution and enhanced the pitting corrosion rate in a FeCl₃ solution. Possible reasons leading to the decrease in corrosion resistance were discussed.     

AFM analysis of piezoelectric nanogenerator based on n-diamond/n-ZnO heterojunction

We have demonstrated a high performance piezoelectric nanogenerator by scanning a diamond-coated conductive tip on ZnO nanorod arrays in an AFM system with contact-mode. About 95% ZnO nanorods generate piezoelectric current due to the excellent mechanical and electrical properties of the tip. The tip's nitrogen-doped diamond coating is the key factor to maintain effective physical contact and electrical contact to ZnO nanorods, leading to efficient piezoelectric generation. Rectifying n⁺-n heterojunction is formed when the nitrogen-doped diamond tip contacted with a ZnO nanorod, which plays an important role in accumulating and releasing piezoelectric charges of the piezoelectric nanogenerator. Our research indicates that conductive diamond film is an ideal electrode for this type of piezoelectric nanogenerator.