沸石中阳离子对氮/氧吸附性能影响的研究进展

基于制氧吸附剂在变压吸附空分制氧工业应用的重要性，从沸石分子筛的氮／氧吸附性能方面，介绍了低硅沸石LSX、钙沸石、锂沸石、锂银沸石等的研究进展。讨论了沸石分子筛骨架结构和其中阳离子的种类、位置、数量与其吸附特性的关系，探讨其在变压吸附空分制氧中的应用前景。     

溶胶-凝胶法制备铁酸盐超微粒子催化剂

采用溶胶－凝胶法制备了含Zn,Ni,Co的铁酸盐超微粒子催化剂，运用DTA－TG、IR、XRD以及BET比表面测试等手段对所制备的样品进行了表征。同时，考察了铁酸盐对二氧化碳选择性氧化乙苯制苯乙烯的催化性能。结果表明：制备的铁酸盐均为尖晶石型晶体，粒子的比表面积为31．9－36．3m^2/g，晶粒大小约为30－35nm，在由二氧化碳选择性氧化乙苯制苯乙烯的反应中表现出较好的催化活性。     

芳亚甲基丙二腈、芳亚甲基氰乙酰胺的固相合成

芳醛和丙二腈、氰乙酰胺在NH4Ac催化下经固相反应高产率的得到芳亚甲基丙 二腈和芳亚甲基氰乙酰胺。     

Facile cyclic ammonium salt with the smallest size for high performance electric double layer capacitors

A novel cyclic ammonium salt, N,N-dimethylpyrrolidinium tetrafluoroborate (P₁₁-BF₄), was successfully synthesized for the first time. The smallest cyclic structure of P₁₁-BF₄ induced high solubility and conductivity in PC, which can easier enter the micropores of activated carbon and occupy more surface area during charge/discharge process.     

Tree-gel and loop-gel conversions in nonlinear polymerization

Ａｓｉｓｗｅｌｌｋｎｏｗｎ,ｔｈｅｔｈｅｏｒｙｆｏｒｎｏｎｌｉｎｅａｒｐｏｌｙｍｅｒｉｚａｔｉｏｎｓｗａｓｉｎｉｔｉａｔｅｄｂｙＦｌｏｒｙａｎｄＳｔｏｃｋｍａｙｅｒ[1—3].ＭｉｌｌｅｒａｎｄＭａｃｏｓｋｏ[4—6]ｐｒｏｐｏｓｅｄａｒｅｃｕｒｓｉｖｅｍｅｔｈｏｄｆｏｒｄｅａｌｉｎｇｗｉｔｈｔｈｅｐｒｏｂｌｅｍｏｆｔｈｅｐｏｓｔｇｅｌｐｒｏｐｅｒｔｉｅｓｏｆｔｈｅｎｅｔｗｏｒｋｆｏｒｍｉｎｇｐｏｌｙｍｅｒｉｚａｔｉｏｎ.Ｓｔｅｐｔｏ[7]ｉｎｖｅｓｔｉｇａｔｅｄｔｈｅｇｅｌｇｅｌｒｅａｃｔｉｏｎｏｆＲＡｆｔ…     

Selective dimerization of α-methylstyrene catalyzed by a solid acid

A novel solid acid prepared from concentrated sulfuric, boric and phosphoric acid is a highly selective catalyst for the dimerization of α-methylstyrene at room temperature to generate 4-methyl-2,4-diphenyl-1-pentene.     

Total synthesis of a conformationally constrained didemnin B analog

The total synthesis of a didemnin B analogue containing a conformationally constrained replacement for the isostatine moiety is reported. Synthetic highlights include an improved preparation of 2-hydroxy-3-cyclohexenecarboxylic acid and a new strategy for accessing the macrocycle.     

Facile synthesis of exfoliated and highly conductive poly(arylene disulfide)/graphite nanocomposites

Exfoliated graphite has been synthesized by first synthesizing H₂SO₄ intercalated compound in a H₂O₂‐H₂SO₄ mixture, followed by exfoliation under microwave irradiation. Poly(arylene disulfide)/graphite nanocomposites were then fabricated by absorbing cyclic(arylene disulfide) oligomers into the pores of exfoliated graphite. Subsequently, the nanocomposite precursor was subjected to heat treatment to carry out the in situ ring‐opening polymerization of the oligomers via free radical mechanism. The as‐prepared nanocomposite exhibited a exfoliated nanostructure as evidenced by transmission electron microscopy (TEM) observation. The nanocomposite with a very small amount of graphite, 5 wt%, possesses a highly electrical conductivity of 4 S/cm, therefore, many applications can be found as conductive materials. Copyright © 2004 John Wiley & Sons, Ltd.     

Photopolymerization induced by a benzophenone derivative photoinitiator

A benzophenone derivative photoinitiator, HBP-TDI-HQ-TDI-HBP （HTCTH）, was synthesized based on 4-hydroxy benzophenone （HBP）, toluene-2,4-diisocyanate （TDI） and hydroquinone （HQ）. HTCTH was a more effective photoinitiator which had longer wavelength absorption in the UV-vis absorption spectra than the low molecular counterpart benzophenone （BP）. It showed that both rate of polymerization （Rp） and final conversion （P） increased with increase of amine and HTCTH concentration in photopolymerization.     

3-(Triethoxysilyl)propionitrile sol-gel coating

3-(Triethoxysilyl)propionitrile (TESPN) sol-gel has been prepared under different conditions. It was employed for coating the surfaces of quartz and aluminum. Infrared (IR) and Raman spectra of TESPN and TESPN sol-gels have been recorded in the study of the sol-gel process. Transmission and reflection absorption IR (RAIR) spectra of TESPN sol-gel coated quartz and aluminum have also been collected for better understanding the film formation on the substrate surfaces. Spectra collected at different temperatures indicated that the silane film on quartz decomposes at 700 degrees C. Results from thermal gravimetric analysis (TGA) supported this result. Based on the group frequencies and the spectral behavior in different states, some vibrational modes were assigned to the observed bands. The anticorrosion behavior of the sol-gel coated aluminum in comparison with the uncoated metal was evaluated by measuring the potentiodynamic polarization and electrochemical impedance spectra (EIS).