Determination of pethidine in human plasma by LC–MS/MS

A sensitive and selective liquid chromatography–tandem mass spectrometry method for the determination of pethidine in human plasma was developed and validated over the concentration range of 4–2000 ng/mL. After addition of ketamine as internal standard, liquid–liquid extraction was used to produce a protein‐free extract. Chromatographic separation was achieved on a 100 × 2.1 mm, 5 µm particle, Allure^TM PFP propyl column, with 45:40:15 (v/v/v) acetonitrile–methanol–water containing 0.2% formic acid as mobile phase. The MS data acquisition was accomplished by multiple reactions monitoring mode with positive electrospray ionization interface. The lower limit of quantification was 4 ng/mL; for inter‐day and intra‐day tests, the precision (RSD) for the entire validation was less than 7%, and the accuracy was within 95.9–106.5%. The method is sensitive and simple, and was successfully applied to analysis of samples of clinical intoxication. Copyright © 2010 John Wiley & Sons, Ltd.     

A Novel Amperometric Nitric Oxide Sensor Based on Polythionine / Nation Modified Glassy Carbon Electrode

A novel amperometric sensor for the determination of nitric oxide was developed by coating polythionine / nafion on a glassy carbon electrode. This sensor exhibited a great enhancement to the oxidation of nitric oxide. The oxidation peak currents were linear to the concentration of nitric oxide over the wide range from 3.6×10-7 to 6.8×10-5 mol.L-1, and the detection limit was 7.2×10-8 mol.L-1. Experimental results showed that this nitric oxide sensor possessed excellent selectivity and longer stability. NO releasing from rat kidney was monitored by this sensor.     

电阻性鱼骨模理论

托卡马克等离子体中高能粒子可以激发一种称为鱼骨模的内扭曲模。现有鱼骨模理论是建立在理想磁流体近似基础上的，它预言有两支不稳定分支。对于高能粒子的比压值，ω≈〈ωｄｍ〉的一支（Ｃｈｅｎ－Ｗｈｉｔｅ分支）的激发阈值较高，而ω≈ω＊ｉ的一支（Ｃｏｐｐｉｚ分支）的激发阈值很低，因而对托卡马克等离子体的加热效率及约束非常不利。不过，我们发现，电阻效应对这支模有实质性的影响。本文详细分析了电阻性鱼骨模理论，给     

A Compact System of Capacitivity Coupled Contactless Conductivity Detection Based on the Square Wave Excitation Signal for Capillary Electrophoresis

This paper reported a compact system of capacitively coupled contactless conductivity detection （C4D） based on the square wave excitation voltage for capillary electrophoresis, and it exhibited excellent sensitivity at the optimal frequency of 198 kHz. The feasibility and sensitivity of this detector was demonstrated by simultaneous detection of thirteen ions including alkali, alkaline earth and heavy metal ions. And the detection limits （S/N 3） were in the range of 0.2-1μmol/L for Mn^2＋, K^＋, Na^＋, Mg^2＋, Ca^2＋, Li^＋, Ba^2＋, and 7-25 μmol/L for Ni^2＋, Cu^2＋, Cd^2＋, Pb^2＋, Co^2＋, Zn^2＋.     

基础滑移隔震体系的地震响应计算

利用随机振动理论求出了基础滑移隔震房屋在无频谱过程的白噪声过程作用下的响应特性，探讨了基础滑移隔震的振动时最佳阻尼系数取值，提出了基础最大滑移量在白噪声过程作用下的计算公式，并进行了基础滑移隔震位移量的试验测定。计算结果与试验结果表明，本文提出的基础滑移隔震体系的计算公式是可行的，为滑移隔震房屋设计证结构安全、合理提供了理论依据。     

Effect of polyethylene glycol on the crystallization and impact properties of polylactide‐based blends

Polylactide (PLA) was plasticized by polyethylene glycols (PEGs) with five different molecular weights (M_w = 200–20,000 g/mol). The effects of content and molecular weight of PEG on the crystallization and impact properties of PLA were studied by wide‐angle X‐ray diffraction, differential scanning calorimetry, scanning electron microscopy, transmission electron microscopy, and V‐notched impact tests, respectively. The results revealed that PEG‐10,000 could significantly improve the crystallization capacity and impact toughness of PLA. When the PEG‐10,000 content ranged from 0 to 20 wt%, the increases in both V‐notched Izod and Charpy impact strengths of PLA/PEG‐10,000 blends were 206.10% and 137.25%, respectively. Meanwhile, the crystallinity of PLA/PEG‐10,000 blends increased from 3.95% to 43.42%. For 10 wt% PEG content, the crystallization and impact properties of PLA/PEG blends mainly depended upon PEG molecular weight. With increasing the M_w of PEG, the crystallinity and impact strength of PLA/PEG blends first decreased and then increased. The introduction of PEG reduced the intermolecular force and enhanced the mobility of PLA chains, thus improving the crystallization capacity and flexibility of PLA. Copyright © 2015 John Wiley & Sons, Ltd.     

Study of the matrix effects of tetrodotoxin and its content in cooked seafood by liquid chromatography with triple quadrupole mass spectrometry

Tetrodotoxin is a marine biotoxin with high acute toxicity. The levels in cooked seafood will help us to assess its intake in humans and may help assess the risk of toxicity. However, heavy matrices hinder the direct quantitation of tetrodotoxin. A quantitative method of measuring tetrodotoxin in cooked seafood using liquid chromatography with triple quadrupole mass spectrometry was established in this study. Tetrodotoxin was extracted from the sample matrix using 2% formic acid in methanol and cleaned using a cation exchange cartridge. The cleanup conditions were optimized. The matrix effects were determined using the postextraction spiking method and by comparing the slope of the linear regression equation in sample matrix to that in solvent. The limit of detection in the sample matrix was 5 μg/kg and the limit of quantification was 10 μg/kg. The mean recoveries at three spiking levels were 66.9–89.2% with relative standard deviations of 5.0–10.8% (n = 6) in five different matrices. Tetrodotoxin was found at concentrations of 26.1–2462 μg/kg in nine of 83 cooked seafoods tested in this study. Eight analogs of Tetrodotoxin were detected in the samples studied.     

Microphase Separation within Disk Shaped Aggregates of Triblock Bottlebrushes

Well‐defined AbBA triblock bottlebrush with poly(N,N‐dimethyl acrylamide) (PAm) as A block and polyacrylate, densely grafted with poly(tert‐butyl acrylate)‐block‐polystyrene (PBA‐b‐PS), as brush bB block is prepared by controlled radical polymerization and click chemistry. The triblock copolymer with a composition of PAm₂₀₀‐b‐b(PBA₁₄‐b‐PS₄₇)₁₆₇‐b‐PAm₂₀₀ is obtained and is further transformed into PAm₂₀₀‐b‐b(PAA₁₄‐b‐PS₄₇)₁₆₇‐b‐PAm₂₀₀ by hydrolysis of the PBA segment into poly(acrylic acid) (PAA). In a mixture of N,N‐dimethylformamide (DMF) and methanol, a poor solvent of bB block, PAm₂₀₀‐b‐b(PAA₁₄‐b‐PS₄₇)₁₆₇‐b‐PAm₂₀₀ self‐assembled into disk‐like platelets, which have an internal lamellar structure by further microphase‐separation of PAA‐b‐PS branches in 2D. Moreover, Ag nanoparticles are aligned by PAA segments along the disk to form a pattern.

     

Three-dimensional network polyamidoamine dendrimer-Au nanocomposite for the construction of a mediator-free horseradish peroxidase biosensor

A three-dimensional network PAMAM-Au nanocomposite (3D-PAMAM-Au NC) was prepared by using the first generation polyamidoamine dendrimer (G1 PAMAM) as the dispersant agent. The resultant 3D-PAMAM-Au NC was successfully used as an immobilization matrix for the construction of a reagentless mediator-free horseradish peroxidase (HRP)-based H(2)O(2) biosensor on a multi-walled carbon nanotubes (MWCNTs) modified glassy carbon electrode. With the advantages of the three-dimensional network, the organic-inorganic hybrid materials dramatically facilitate the direct electron transfer of HRP, and good bioelectrocatalytic activity towards H(2)O(2) was demonstrated. Under optimum conditions, the current response of the enzyme modified electrode at -0.30 V was detected. The current response is linearly correlated to H(2)O(2) concentration within the range of 18.00 μM to 20.80 mM with a correlation coefficient of 0.9992 and a sensitivity of 377.78 μA mM(-1) cm(-2). The detection limit was down to 6.72 μM (S/N = 3). Furthermore, the biosensor exhibits some other excellent characteristics, such as high selectivity, short response time, and long-term stability. The 3D-PAMAM-Au NC has proved to be a promising biosensing platform for the construction of mediator-free biosensors, and may find wide potential applications in biosensors, biocatalysis, bioelectronics and biofuel cells.