Preparation of flame retardant polyamide 6 composite with melamine cyanurate nanoparticles in situ formed in extrusion process

This paper is focused on in situ preparation of melamine cyanurate (MCA) nanoparticles from reaction of melamine (MEL) and cyanuric acid (CA) and their flame retardant polyamide 6 (PA6) composite in the extrusion process through a novel reactive processing method. Fourier transform infrared (FT-IR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) were utilized to characterize the in situ formed MCA nanoparticles and their blends with PA6. Introduction of pentaerythritol (LTP) and water-bound plasticizer dioctyl phthalate (DPT) into the extrusion reaction system greatly inhibits the evaporation of water required for melamine and cyanuric acid reaction at high temperature (higher than 180 °C), laying a foundation for successful in situ preparation of MCA through reactive processing. XRD and FT-IR measurements indicate that under the effect of pentaerythritol, dioctyl phthalate and water, melamine really reacts with cyanuric acid to in situ form MCA in extrusion process. The reaction degree is close to 100%. A very important finding through SEM is that the in situ formed MCA particles, which were found to have aspect ratio of about 7.5, radial size in the range of 70-300 nm (mostly 70-90 nm) and crystallite size of less than 22 nm, are uniformly dispersed in the matrix PA6 at nanoscale. The in situ formed MCA nanoparticles greatly improve the flame retardancy and the mechanical properties of flame-retarded PA6 materials, and the introduced plasticizer dioctyl phthalate also ameliorates the related impact property. The obtained flame-retarded PA6 materials have good comprehensive performance with flame retardancy UL-94 V-0 rating at 1.6 and 3.2 mm thickness, tensile strength 48.0 MPa, elongation at break 106.3% and Izod notched impact strength 8.92 kJ/m². Compared with flame-retarded PA6 material with in situ formed MCA, the one prepared through conventional blending of PA6 with commercial MCA product has improved tensile strength but deteriorated impact strength and flame retardancy.     

关于静电作用对酶活性部位残基pKa影响的定量计算

随着基因技术的发展,人们几乎已经可以任意替换蛋白质序列中的特定残基。由于理论上对蛋白质性能的预测工作还远远跟不上实验的发展,只能花费大量的人力、物力利用实验方法筛选突变体。这就迫切需要建立一套能够正确预测蛋白质性质的方法。静电作用在酶促反应中起到了重要作用。基于表面带电残基对酶活性部位残基pK_α的影响,可利用替换表面残基的方法改变酶促反应随pH的变化趋势,是蛋白质工程研究中的一种有效方法。由于表面极性残基处于高介电常数的溶剂(水)与低介电常数的蛋白质的界面上,对此问题尚未有圆满的理论方法进行解决。我们利用Kirkwood理论定量地表述了表面荷电残基的替换对酶活性部位残基pK_α的影响,为研究酶突变体的性质,如突变体的电化学性质、酶催化反应随pH变化趋势的改变,酶专一性的改变等提供了一种简便的方法。     

A concise synthesis of nornitidine via nickel- or palladium-catalyzed annulation

A concise method to synthesize benzo[c]phenanthridine alkaloid, nornitidine, was developed utilizing nickel- or palladium-catalyzed iminoannulation of an internal alkyne. The advantages of this strategy included readily available starting materials, inexpensive reagents, short reaction steps, and good yields.     

SrZnO_2∶Eu~(3+),Li~+长波紫外激发红光荧光体的合成及发光性能研究

采用高温固相法合成了一种长波紫外激发的SrZnO2∶Eu3+,Li+发光材料,用X射线衍射谱、荧光光谱对样品进行了表征。结果表明,Eu3+离子在SrZnO2基质中主要占据Sr2+离子不对称性格位,发射来源于5D0→7F2612 nm为主的红光。加入电荷补偿剂Li+离子能显著提高发光强度,350~400 nm内的激发峰也有明显提高,同时观察到来自Eu3+离子高能级5D1→7FJ(J=0~2)的跃迁发射,并对其产生机制进行了初步探讨。实验结果表明,SrZnO2∶Eu3+,Li+是一种有发展前途的长波紫外激发红光荧光体。     

反胶束笼对纳米氯化银反应性能的微环境限定

研究了反映束中直径为１０￣１７ｎｍ的ＡｇＣｌ微料与亚甲基蓝之间的作用，比较了阴离子型和非离子型表面活性剂组成的反胶束微环境的影响，讨论了亚甲基蓝在粒子上的吸附，二聚体形成的钠米ＡｇＣｌ粒子对亚甲基蓝荧光猝灭机制。     

LiCl急冷过程中结构变化研究的一种几何学方法

计算了900 K、698 K、498 K和298 K温度下共4800个Voronoi多面体并对它们进行了统计分析. 计算表明: 在玻璃态转变温度区间, Voronoi多面体的统计分布有明显的变化。在以阳离子为中心的Voronoi多面体中, 在298 K时,四面体、五面体和六面体占总数的80%以上。     

A new C21-steroidal glycoside from Cynanchum stauntonii

A new C21-steroidal glycoside with two known compounds were isolated from the root of Cynanchum Stauntonii.Based on thespectral analysis,including MS,1H NMR,13C NMR,DEPT,1H-1H COSY,13C-1H COSY,HMQC and HMBC,their chemicalstructures were determinated as glaucogenin-C 3-O-a-L-cymaropyranosyl-(1→4)-b-D-digitoxopyranosyl-(1→4)-β-D-canaropyranoside(1),stigmasterol(2)and ursolic acid(3).