氨对硅基铁纳米薄膜高温重凝核的影响

采用弧过滤离子沉积系统（arc filtered deposition,AFD）在纯硅表面制备铁纳米薄膜。研究了750℃下铁纳米薄膜在氢气氛围以及氨气氛围中重凝核的规律。研究表明,在氢气氛围中,铁纳米薄膜重凝核以后形成的铁纳米颗粒随薄膜的厚度增加以及保温时间的延长而增大;但在氨气氛围中,铁纳米薄膜重凝核后形成的纳米颗粒的尺寸随保温时间的变化更为复杂：在氨气作用的初始阶段,铁颗粒的尺寸随氨气作用时间的延长而逐渐变大,但一段时间以后,铁颗粒的尺寸又随氨气作用时间的延长而变小,直到铁颗粒平均直径达到一个最小值（大约在氨气介入后的12min）,随后铁颗粒的尺寸又逐渐变大,并最终达到一稳定值。     

Effect of mechanical force on domain switching in BiFeO_3 ultrathin films

Ferroelectric polarization can be switched by an external applied electric field and may also be reversed by a mechanical force via flexoelectricity from the strain gradient.In this study,we report the mechanical writing of an epitaxial BiFeO3(BFO)thin film and the combined action of an applied mechanical force and electric field on domain switching,where the mechanical force and electric field are applied using the tip of atomic force microscopy.When the applied force exceeds the threshold value,the upward polarization of the BFO thin film can be reversed by pure mechanical force via flexoelectricity;when an electric field is simultaneously applied,the mechanical force can reduce the coercive electric field because both the piezoelectricity from the homogeneous strain and the flexoelectricity from strain gradient contribute to the internal electric field in the film.The mechanically switched domains exhibit a slightly lower surface potential when compared with that exhibited by the electrically switched domains due to no charge injection in the mechanical method.Furthermore,both the mechanically and electrically switched domains exhibit a tunneling electroresistance in the BFO ferroelectric tunnel junction.     

The High Energy X-ray telescope (HE) onboard the Insight-HXMT astronomy satellite

The Insight-Hard X-ray Modulation Telescope(Insight-HXMT) is a broadband X-ray and γ-ray(1-3000 ke V) astronomy satellite. One of its three main telescopes is the High Energy X-ray telescope(HE). The main detector plane of HE comprises 18 Na I(Tl)/Cs I(Na) phoswich detectors, where Na I(Tl) is used as the primary detector to measure ~ 20-250 ke V photons incident from the field of view(FOV) defined by collimators, and Cs I(Na) is used as the active shielding detector to Na I(Tl) by pulse shape discrimination. Additionally, Cs I(Na) is used as an omnidirectional γ-ray monitor. The HE collimators have a diverse FOV,i.e. 1.1°×5.7°(15 units), 5.7°×5.7°(2 units), and blocked(1 unit). Therefore, the combined FOV of HE is approximately5.7°×5.7°. Each HE detector has a diameter of 190 mm resulting in a total geometrical area of approximately 5100 cm2, and the energy resolution is ~15% at 60 ke V. For each recorded X-ray event by HE, the timing accuracy is less than 10 μs and the deadtime is less than 10 μs. HE is used for observing spectra and temporal variability of X-ray sources in the 20-250 ke V band either by pointing observations for known sources or scanning observations to unveil new sources. Additionally, HE is used for monitoring the γ-ray burst in 0.2-3 Me V band. This paper not only presents the design and performance of HE instruments but also reports results of the on-ground calibration experiments.     

FLTD三电极场畸变气体开关寿命特性

针对设计的一种场畸变气体开关,研究中间电极材料分别为不锈钢和黄铜条件下的烧蚀特性,结合开关寿命期间静态与触发特性的变化规律,获得决定开关寿命的关键因素,为三电极场畸变气体开关的性能优化提供理论支撑。研究结果表明,采用不锈钢和黄铜作为中间电极的烧蚀区域以及表面粗糙度均随着放电次数增加而增大,黄铜电极烧蚀较为严重且表面有明显的烧蚀圆斑,不锈钢电极则具有更高的表面粗糙度,阴阳极表面烧蚀存在明显差异,随着放电次数的增加,击穿点向电极边缘区域集中,影响开关的沿面绝缘特性,是导致开关寿命终结的主要原因。     

质子治疗装置动态电源控制系统研发

针对质子治疗装置中主环动态电源多平台能量的引出需求,研制了基于开源平台的高速实时动态电源控制系统,该控制系统以开源平台Beaglebone作为顶层硬件接口,以现场可编程逻辑门阵列（FPGA）为核心的控制器作为底层硬件接口,采用分布式的实验物理及工业控制系统（EPICS）进行远程控制。该系统可实时传输任意动态电源的输出参考电流波形数据,并结合定时系统与联锁系统,控制动态电源按预设电流波形进行输出,并实现多平台能量的引出。实验结果显示该控制系统能实现每秒最高十万条指令传输,百万次数据传输零误码率。同时,该系统结构灵活、扩展性强,可作为通用控制平台。     

采用组合引导磁场的多注二极管设计

分析了采用单一同轴磁场时强流相对论多注阴极的侧端发射问题,研究了在不同磁场内半径和多注漂移管长度情况下多注电子束的传输效率。研究发现：由于引导磁场尺寸有限,高压下多注阴极杆及多注阴极柱的电子束发射是影响多注电子束传输效率的主要因素,且该部分电子束对多注漂移管入口管壁的轰击直接影响了多注速调管的重频能力。设计了采用永磁铁和同轴磁场组合工作的强流相对论多注二极管,理论分析和模拟计算证明：基于组合磁场的多注二极管可明显减弱甚至抑制多注阴极发射球头以外的电子束发射,并且组合磁场的磁场位形和强度可满足强流相对论多注电子束的高效、稳定传输。

     

Efficient Quantum Dot Light-Emitting Diodes Based on Well-Type Thick-Shell CdxZn1−xS/CdSe/CdyZn1−yS Quantum Dots

Device grade quantum dots (QDs) require QDs ensembles to retain their original superior optical properties as in solution. QDs with thick shells are proven effective in suppressing the inter-dot interaction and preserving the emission properties for QDs solids. However, lattice strain–induced defects may form as the shell grows thicker, resulting in a notable photoluminescence quenching. Herein, a well-type Cd_xZn_1−xS/CdSe/Cd_yZn_1−yS QDs is proposed, where ternary alloys CdZnS are adopted to match the lattice parameter of intermediate CdSe by separately adjusting the x and y parameters. The resultant thick-shell Cd_0.5Zn_0.5S/CdSe/Cd_0.73Zn_0.27S QDs reveal nonblinking properties with a high PL QY of 99% in solution and 87% in film. The optimized quantum dot light-emitting diodes (QLEDs) exhibit a luminance of 31547.5 cd m⁻² at the external quantum efficiency maximum of 21.2% under a bias of 4.0 V. The shell thickness shows great impact on the degradation of the devices. The T₅₀ lifetime of the QLEDs with 11.2 nm QDs reaches 251 493 h, which is much higher than that of 6.5 and 8.4 nm QDs counterparts. The performances of the well-type thick-shell QLEDs are comparable to state-of-the-art devices, suggesting that this type of QDs is a promising candidate for efficient optoelectronic devices.     

The Applications of Order Reduction Methods in Nonlinear Dynamic Systems

Two different order reduction methods of the deterministic and stochastic systems are discussed in this paper. First, the transient proper orthogonal decomposition (T-POD) method is introduced based on the high-dimensional nonlinear dynamic system. The optimal order reduction conditions of the T-POD method are provided by analyzing the rotor-bearing system with pedestal looseness fault at both ends. The efficiency of the T-POD method is verified via comparing with the results of the original system. Second, the polynomial dimensional decomposition (PDD) method is applied to the 2 DOFs spring system considering the uncertain stiffness to study the amplitude-frequency response. The numerical results obtained by the PDD method agree well with the Monte Carlo simulation (MCS) method. The results of the PDD method can approximate to MCS better with the increasing of the polynomial order. Meanwhile, the Uniform-Legendre polynomials can eliminate perturbation of the PDD method to a certain extent via comparing it with the Gaussian-Hermite polynomials.     

电枢参数对电枢超导型高温超导电机性能的影响

高温超导材料存在背景磁场依赖性和各向异性的问题,针对超导感应电机采用双层绕组结构,提出了双重镜像法建立开口矩形槽内漏磁场垂直方向和水平方向的解析模型,利用该模型研究了超导线圈在传输不同电流情况下磁场分布规律,揭示了开口矩形槽电磁结构参数对槽内超导线圈所受表面磁场的影响规律。研究结果表明,适当增大槽宽尺寸可以有效降低超导线圈表面所受最大磁场,传输电流和线圈匝数均能够近乎线性增大超导线圈表面所受最大磁场。