Flexible nanocrystalline‐titania/polyimide hybrids with high refractive index and excellent thermal dimensional stability

In this study, a novel synthetic route was developed to prepare polyimide–nanocrystalline–titania hybrid optical films with a relatively high titania content (up to 50 wt %) and thickness (20–30 μm) from soluble polyimides containing hydroxyl groups. Two series of newly soluble polyimides were synthesized from the hydroxy‐substituted diamines with various commercial tetracarboxylic dianhydrides. The hydroxyl groups on the backbone of the polyimides could provide the organic–inorganic bonding and resulted in homogeneous hybrid solutions by controlling the mole ratio of titanium butoxide/hydroxyl group. AFM, SEM, TEM, and XRD results indicated the formation of well‐dispersed nanocrystalline‐titania. The flexible hybrid films could be successfully obtained and revealed relatively good surface planarity, thermal dimensional stability, tunable refractive index, and high optical transparency. A three‐layer antireflection coating based on the hybrid films was prepared and showed a reflectance of less than 0.5% in the visible range indicated its potential optical applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1433–1440, 2010     

Efficient gel‐type electrolyte with bismaleimide via in situ low temperature polymerization in dye‐sensitized solar cells

This study reports the characteristics of gel‐type dye‐sensitized solar cells (DSSCs), fabricated with gel‐type electrolyte containing poly‐1,1′‐(methylenedi‐4,1‐phenylene)bismaleimide (PBMI), or poly‐1,1′‐(3,3′‐dimethyl‐1,1′‐biphenyl‐4,4′‐diyl)bismaleimide (PDBBMI), or poly‐N,N′‐(4‐methyl‐1,3‐phenylene)bismaleimide (PMPBMI), prepared by in situ polymerization of the corresponding monomer without an initiator at 30 °C. Incorporating 0.3 wt % content of exfoliated alkyl‐modified nanomica (EAMNM) into PBMI‐gelled electrolyte leads to higher short‐circuit current density (J_sc = 17.14 mA cm^?2) and efficiency (η = 7.02%) than that of neat PBMI‐gel electrolyte (J_sc = 15.32 mA cm^?2, η = 6.41%). Incorporating 0.3 wt % EAMNM into PBMI‐gelled electrolyte results in remarkably stable device performance under continuous light soaking under one sun (100 mW cm^?2) at 55 °C. The efficiency of DSSCs based on PBMI/0.3 wt % EAMNM‐gelled electrolyte drops by only 1.7% (η = 6.93%) after 500 h of continuous light soaking. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Rate enhancement for nitroxide stable free radical polymerization of n‐butyl acrylate by dodecylbenzenesulfonic acid

Dodecylbenzenesulfonic acid, DDBSA, was chosen as a new rate‐accelerating additive for 2,2,6,6,‐teramethyl‐1‐piperidinyloxy (TEMPO)‐mediated stable free radical polymerization of n‐butyl acrylate (n‐BA) monomers with 2,2′‐azobisisobutyronitrile (AIBN). It was found that the number‐average molecular weight of polymers could reach about ten thousand with a narrow polydispersity index (PDI) of 1.4 in a few minutes, which was faster than other systems reported previously. But, at higher conversion, the molecular weight distribution of polymers became broad, and a bimodal distribution occurred. The macro‐initiators isolated from the former polymers with narrow PDI could be extended by polymerization with monomers by the addition of DDBSA. Furthermore, a proposed kinetic model demonstrated that the decay of the concentration of DDBSA would reduce the living polymer concentration and retard the growth of the polymers, which could be further propagated by the supplement of DDBSA. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 42–49, 2005     

Numerical study on InGaAsN/GaAs multiple-quantum-well laser with GaAsP and GaAsN barriers

In this work, the multiple-quantum-well InGaAsN laser structures with indirect-GaAsP and direct-GaAsN barriers are investigated by using LASTIP simulation program. We vary the quantum-well number, from 1 to 5, to find appropriate barrier material for InGaAsN laser structures. The simulation results show that InGaAsN laser structure has higher characteristic temperature regardless of what quantum-well number is if the indirect-GaAsP barrier is utilized. Furthermore, for InGaAsN laser structure, the usage of indirect-GaAsP barrier is beneficial for reducing the threshold current when the quantum-well number is from 1 to 2 and the usage of direct-GaAsN barrier is beneficial for reducing the threshold current when the quantum-well number is from 3 to 5.     

A complete measurement of spin-observables for intermediate-energy inclusive quasielastic polarized proton scattering from C

The complete set of Wolfenstein parameters, the polarization, the asymmetry of scattering and the unpolarized double-differential cross section are presented for inclusive quasielastic proton scattering from ¹²C at a central momentum transfer of q = 1.9 fm⁻¹ and incident energies of 290 and 420 MeV. The spin observables D₀, D_x, D_y and D_z as well as the longitudinal-to-transverse ratio of spin-flip probabilities are extracted from the data. Across the quasielastic continuum, the experimental data is compared to the variations expected from a single-scattering Fermi-gas approximation using the free NN amplitudes. Medium effects are evident in the pronounced quenching of the polarization parameter relative to the free value.     

Simple Method in Diagnosing Cancer Cells by a Novel Fluorescence Probe BMVC

Different cellular accumulations with distinct fluorescence properties of BMVC in cancer cells from normal cells allow us to establish a simple and economic method for the diagnosis of cancer cells. With using a light emitting diode to excite the BMVC molecule, microarray fluorescence analysis of a cell‐based glass chip provides an easy method towards the detection of a limited number of cancer cells.     

Improvement in piezoelectric effect of violet InGaN laser diodes

The laser performance of violet InGaN laser diodes is investigated numerically. The polarization-dependent properties, including overlap of electron and hole wavefunctions, threshold current, and slope efficiency, are studied through the use of step-like quantum well structure. Furthermore, the electron and hole wavefunctions, band diagrams, and emission wavelength are compared and analyzed. The simulation results show that the lowest threshold current and the highest slope efficiency are obtained when the step-like quantum well structure is designed as In_0.12Ga_0.88N (2.5 nm)-In_0.18Ga_0.82N (1 nm) or In_0.18Ga_0.82N (2.5 nm)-In_0.12Ga_0.88N (1 nm) for violet laser diodes due to sufficiently enhanced overlap of electron and hole wavefunctions.     

X射线衍射仪功能扩展的研究

通过软件实现了用 Ｐ Ｃ 机调用日本 Ｒｉｇａｋｕ 公司生产的 Ｄ／ ｍａｘ 一类 Ｘ 射线衍射仪测量数据，利用 Ｐ Ｃ 机的复杂计算功能，使原有仪器也可以进行新的结构分析工作，扩展了仪器的功能。     

A simple approach toward low‐dielectric polyimide nanocomposites: Blending the polyimide precursor with a fluorinated polyhedral oligomeric silsesquioxane

This article describes a new and simple method for preparing polyimide nanocomposites that have very low dielectric constants and good thermal properties: simply through blending the polyimide precursor with a fluorinated polyhedral oligomeric silsesquioxane derivative, octakis(dimethylsiloxyhexafluoropropyl) silsesquioxane (OF). The low polarizability of OF is compatible with polyimide matrices, such that it can improve the dispersion and free volume of the resulting composites. Together, the higher free volume and lower polarizability of OF are responsible for the lower dielectric constants of the PI‐OF nanocomposites. This simple method for enhancing the properties of polyimides might have potential applicability in the electronics industry. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6296–6304, 2008