Chiral separation abilities of homogeneously synthesized cellulose 3,5-dimethylphenylcarbamates: Influences of degree of substitution and molecular weight

A series of cellulose 3,5-dimethylphenylcarbamates(CDMPCs) with different degrees of substitution(DS) and degrees of polymerization(DP) were homogeneously synthesized in 1-allyl-3-methylimidazolium chloride(Amim Cl). Then, the CDMPCs were coated on silica gel and used as chiral stationary phases(CSPs), and their chiral recognition abilities for seven racemates were evaluated by high performance liquid chromatography. The results showed that DS and DP of CDMPCs had a great influence on chiral recognition abilities of the CSPs. The CSPs with the DS ≈ 1 gives a low chiral recognition to most racemates. On the contrast, the CSPs with the DS ? 2 exhibited high chiral separation abilities. For example, six racemates could be separated on the CSP with CDMPC of DS ≈ 2(CSP-2). Especially, for the enantioseparation of 1-(2-naphthyl) ethanol and Tr?ger's base, CSP-2 gave the highest separation ability in all of CSPs. On the other hand, when the DP of cellulose was in a range from 39 to 220, the chiral separation abilities of CDMPCs increased as the DP increased. This work demonstrates that the structure of cellulose esters such as DS and DP has important effect on their chiral separation ability, and therefore provides a practical method to design and prepare desirable CSPs for different racemates.     

测定啤酒和白葡萄酒中有机酸的离子排斥色谱法

研究了离子排斥色谱法分离测定啤酒和白葡萄酒中有机酸；选用常见的盐酸溶液作淋洗液，以四丁基氢氧化铵为再生液，考察了淋洗液浓度、流量等因素对分离和测定的影响，对啤酒和白葡萄酒中常见有机酸在阴离子排斥色谱柱上的保留行为进行了系统的研究；通过试验确定最佳的色谱条件为盐酸浓度1．10mmol/L，流量0．80mL/min；四丁基氢氧化铵浓度5.0mmol/L，流量1.10mL/min；并在该条件下，测定了啤酒和白葡萄酒中的有机酸。     

微波在分析化学及有机合成中的应用

综述了近10年来微波技术在分析化学和有机合成中的应用，着重介绍了微波消解在分析化学和微波辐射在有机合成反应中的应用进展。     

纳米尖晶石LixMn2O4的制备与电化学性能表征

Nano-spinel Li_xMn₂O₄(0.6 ≤x≤ 1.0) was synthesized by two steps of coprecipitation and calcination. The influences of calcination temperature, time and Li/Mn ratio on the crystal structure and the particle size of Li_xMn₂O₄ were investigated. It was shown that the higher the calcination temperature, the more complete the crystal structure, and the larger the particle size. Moreover, the influence of calcination time on the crystal structure was insignificant when it was more than 3h at 700℃. With the increase of x in Li_xMn₂O₄ in the range of 0.6～1.0, the d111 and lattice parameter a increased first and then decreased. The electrochemical properties of nano-spinel LiMn₂O₄ using as cathode material of lithium-ion battery were studied. The low discharge capacity might be due to the irreversible capacity loss brought by the large surface area and lattice vacancies of the nano-spinel.     

原油饱和烃指纹的内标法分析

采用内标法建立了原油中正构烷烃、生物标志物(甾、萜烷类)的分析方法。确定了样品前处理方法和组分定性定量方法。讨论了柱层析分离能力。结果表明,所有饱和烃组分均流入第一部分流出液F1中,分离能力较为满意。对48种甾、萜烷类生物标志物组分以及姥鲛烷、植烷和正构烷烃等进行了定性确认,定性化合物数量多,信息量大,易于据此进行可靠的油指纹分析鉴别。32个正构烷烃组分相对标准差为1.2%～7.4%;45个生物标志物组分相对标准偏差为2.5%～9.2%。分析精密度较好,满足油指纹鉴别需要。正构烷烃回收率为73%～116%;生物标志物为84%～106%;回收率结果较为满意。正构烷烃方法检出限为7.0μg/g;生物标志物为0.65μg/g,满足原油样品分析要求。通过本方法对自不同和相同平台的原油样品进行饱和烃浓度分析,并采用浓度数据进行鉴别,结果与实际情况相符。     

发用防晒剂DDABDT的反相高效液相色谱法测定

建立了反相高效液相色谱法测定发用防晒剂二甲基对胺基苯甲酰胺丙基十二烷基二甲胺甲苯磺酸盐(简称DDABDT)的方法.采用的色谱条件为色谱柱Symmetry C8柱,流动相为V(乙腈):V(10 mmol/L NaAc)=65:35溶液(含体积分数0.02%三氟乙酸,pH5.04),流速1.0 mL/min;检测波长305 nm;进样量20μL.DDABDT质量浓度为0.05～1000 mg/L时,其浓度与峰面积呈良好的线性关系(R2＞0.999),检出限为0.02 mg/L(S/N=3).洗发水A中DDABDT的回收率在98.0%～102%之间,发样提取液中DDABDT的平均回收率在85%～108%之间.洗发水中DDABDT浓度测定日内和日间相对标准分别为1.2%,3.4%.头发吸附DDABDT含量测定日内和日间相对标准偏差(RSD)分别为9.1%,9.8%.同时以高效液相色谱-电喷雾离子化质谱对色谱法测定样品的DDABDT峰进行了验证.该方法已用于洗发水及头发吸附DDABDT的分析.     

纳米复合材料CoFe2O4/SiO2的制备和表征

采用溶胶-凝胶法制备了(CoFe2O4)x/(SiO2)1-x纳米复合材料. 利用TG/DTA, XRD和Mssbauer效应研究了热处理过程中干凝胶的变化及样品的结构、晶粒尺寸和磁性. 结果表明, 随着SiO2含量的增加, 样品中CoFe2O4的晶粒尺寸和内磁场逐渐变小, 并从磁有序状态转变为超顺磁状态.     

乙酰化稻草/聚己内酯接枝共聚物的合成及表征

以稻草秸秆为原料,经粉碎后进行全植物秸秆的乙酰化改性,再用此乙酰化稻草同ε-己内酯(ε-CL)接枝共聚合成乙酰化稻草/聚己内酯接枝共聚物(ACSW-g-PCL)。研究了反应时间、反应温度、及单体用量对接枝率(G%)的影响。在反应温度140℃,反应时间10h,ε-CL对乙酰化稻草的质量比2:1时获得的接枝率最大为39%。产物的结构和性能通过红外光谱、核磁共振、扫描电镜、X-射线衍射和热分析仪表征,结果表明乙酰化稻草秸秆已成功接枝上聚己内酯(PCL)链段,经接枝ε-CL改性后的ACSW-g-PCL热稳定性有所改善,并具有了一定的热塑性。     

层状、花形和棒状钛酸铋纳米结构的可控合成及光催化性能

通过可控水热法,制备出层状、花形和棒状钛酸铋(Bi4Ti3O12,BIT)纳米结构。通过X射线衍射(XRD)和场发射扫描电子显微镜(FESEM)观测其结构和形貌特征。XRD图显示,所制备的样品为层状钙钛矿结构。FESEM结果表明,通过控制水热过程的反应参数可以得到不同形貌的纳米粉体。紫外-可见漫反射光谱(UV-Vis DRS)表明BIT样品的带隙能约为2.63～2.95 eV。利用可见光(λ>420 nm)照射下的甲基橙降解实验评价了BIT样品的光催化性能。结果表明,BIT的光催化活性比掺氮TiO2(N-TiO2)高得多。所制备的层状BIT纳米结构光催化效率最高,经可见光照射360 min,甲基橙溶液的降解率可达95.0%。同时还研究了结构和形貌对不同条件下制备的BIT样品光催化活性的影响。     

“门控制”效应分子印迹传感器测定绿麦隆

在氧化铂电极表面采用化学聚合法制得绿麦隆分子印迹膜传感器。利用"门控制"中"门"的数量变化控制催化性能的强弱,结合氧化铂对过氧化氢的催化放大效应,有效的提高了传感器的灵敏度并建立了对环境中绿麦隆残留的检测方法。研究了氧化铂电极对过氧化氢的催化效果,并对分子印迹膜聚合配比、过氧化氢浓度、洗脱时间、重吸附时间进行优化。在优化条件下,绿麦隆浓度在1.0×10^-88.0×10^-6mol/L范围内与氧化铂电极对过氧化氢的催化电流呈负相关性,检出限为5.4×10^-9moL/L。该传感器成功应用于农田水样的检测,其回收率为98.5%¹02.0%。