两个正交子能级的V型三能级系统的粒子数振荡特性

研究了线偏振脉冲光场激发下,半导体量子点中两个正交子能级上的粒子数振荡特性.利用旋转波近似方法给出了共振激发和无衰减时粒子数运动方程的解析解.引入了该系统的等效跃迁偶极矩和等效脉冲面积，并给出了其关系表达式.理论分析表明，该体系中的子能级上粒子数振荡的振幅和频率都可以通过改变激发场的偏振角和系统的初态条件进行调控. 关键词： Rabi振荡 旋转波近似 三能级系统     

流动注射化学发光法测定盐酸曲普利啶

在碱性溶液中,N-氯代丁二酰亚胺可以氧化二氯荧光素产生化学发光。盐酸曲普利啶的存在可以显著地增强这一反应的化学发光信号。基于此,结合流动注射技术,优化了实验条件,建立了测定盐酸曲普利啶的流动注射化学发光新方法。该方法测定盐酸曲普利啶的线性范围1.0×10^-9—1.0×10^-7g/mL,检出限为5.0×10^-10g/mL。对浓度为7.0×10^-9g/mL盐酸曲普利啶溶液进行11次平行测定的相对标准偏差为4.1%。该方法已用于药物制剂中盐酸曲普利啶的含量测定,结果令人满意。     

Stochastic resonance induced by a multiplicative periodic signal in a logistic growth model with correlated noises

The stochastic resonance (SR) phenomenon induced by a multiplicative periodic signal in a logistic growth model with correlated noises is studied by using the theory of signal-to-noise ratio (SNR) in the adiabatic limit. The expressions of the SNR are obtained. The effects of multiplicative noise intensity α and additive noise intensity D, and correlated intensity λ on the SNR are discussed respectively. It is found that the existence of a maximum in the SNR is the identifying characteristic of the SR phenomena. In comparison with the SR induced by additive periodic signal, some new features are found: (1) When SNR as a function of λ for fixed ratio of α and D, the varying of α can induce a stochastic multi-resonance, and can induce a re-entrant transition of the peaks in SNR vs λ; (2) There exhibits a doubly critical phenomenon for SNR vs D and λ, i.e., the increasing of D (or λ) can induce the critical phenomenon for SNR with respect to λ (or D); (3) The doubly stochastic resonance effect appears when α and D are simultaneously varying in SNR, i.e., the increment of one noise intensity can help the SR on another noise intensity come forth.      

频率自适应最优权重阵列干涉条纹处理技术

考虑长基线水平阵列波束形成对声场模态呈现的滤波特征,建立了一种随频率改变滤波通带的阵列权矢量设计方法。基于简正波理论,结合声场波束形成特点,在分析了常规波束形成信号LOFAR谱图干涉条纹的清晰度和条纹结构不同于单水听器输出信号条纹现象基础上,采用线性等式约束的二次优化模型,给出了一种频率自适应的最优权重估计。数值仿真验证和试验数据分析表明,利用该方法设计的最优权重阵列波束处理,可以滤波出SRBR(Surface-Reflected Bottom-Reflected)或N-SRBR(Non-Surface-Reflected Bottom-Reflected)模态组成的波束形成信号,信号谱图干涉条纹斜率与理论分析基本一致。     

近地层大气光学湍流的分形和间歇性特征分析

利用光纤湍流测量系统获得了合肥西郊科学岛上气象观测场内下垫面平坦的水面上方0.48m、草地上方1.8m和23m高处的大气折射率起伏的观测数据,采用R/S分析法计算了近地层大气光学湍流的赫斯特指数和分形维数,统计分析了分形维数的日变化特征及概率分布特征。结果表明:对于一天的不同时段,分形维数在一定范围内动态变化,且中午时段相对稳定;在三种下垫面条件下,全天分形维数的值大多在1.3~1.4之间,其最可几概率位于1.35处,从均值来看,草地上方1.8m的分形维数最大,水面上方0.48m次之,草地上方23m处最小。最后,初步探讨了近地层大气光学湍流分形维数、间歇性指数和湍流发展程度的相关性。     

不同产地亚麻籽矿物质元素及脂肪酸组成的主成分分析

亚麻籽是一种具有食用与药用价值的生物质,富含多种营养物质与矿物质元素。我国是亚麻籽的主要产地之一,为探讨不同产地亚麻籽中矿物质元素与脂肪酸组成的主要特征成分,采用电感耦合等离子体质谱法(ICP-MS)分析了10个产地亚麻籽中的17种矿物质元素,利用气相色谱-质谱联用法(GC-MS)分析了于相同条件下提取的10个产地亚麻籽油脂中的脂肪酸组成。采用主成分分析法对10个产地亚麻籽中的矿物质元素及脂肪酸组成进行了分析,探讨了不同产地亚麻籽矿物质元素及脂肪酸组成的差异,分析了矿物质元素及脂肪酸的主要特征成分。结果表明,K,Sr,Mg,Ni,Co,Cr,Cd,Se,Zn和Cu是亚麻籽的主要特征矿物质元素,C16∶0,C18∶0,C18∶2,C18∶3,C20∶0,C20∶1是亚麻籽油脂的主要特征脂肪酸。ICP-MS和GC-MS结合主成分分析,可有效揭示不同产地亚麻籽中矿物质元素与脂肪酸组成的特征与差异,进而为亚麻籽的合理、有效利用提供重要的理论依据。     

ZnSe、ZnS量子点的可控合成与表征

采用改进后的合成方法,以Se和ZnO粉末为原料,在十六胺(HDA)、月桂酸(LA)和三辛基膦(TOP)有机溶剂体系中合成了胶体ZnSe和ZnS量子点。主要研究了溶剂配比、反应温度及生长时间对ZnSe量子点粒径和光学性质的影响。结果表明:制得的ZnSe和ZnS量子点均是纤锌矿型结构,且具有较好的尺寸均匀性、分散性及荧光特性。粒子直径可控制在4.5~8 nm范围内。采用参数n(ZnO) : n(HDA) : n(LA)=1 : 2.1 : 5.2,c(TOPSe)=1 mol/L,在280 ℃成核,240 ℃生长条件下合成的ZnSe量子点具有最佳的尺寸范围,并且随着生长时间的延长,粒径变大,荧光发射峰明显红移。     

Optimally chosen Nakajima–Zwanzig master equation for mean field approximation

We define an ensemble of projection operators, each of which has an exact associated Nakajima–Zwanzig master equation for quantum open system evolution. A mean field approximation for the memory kernels is introduced that yields a completely determined inhomogeneous master equation for every projection operator. A specific projection operator is then chosen so that the master equation optimally matches an abstract mathematical form which preserves positivity, complete positivity, and correctly equilibrates. We study a nitrogen vacancy center in diamond interacting with ¹³C impurities to illustrate the method.     

Optically active helical polyurethane@attapulgite composites: Effect of optical purity of S-1,1′-binaphthyl-2,2′-diol on infrared emissivity

Helical polyurethane@attapulgite (HPU@ATT) composites were prepared after the surface modification of the rod-like attapulgite (ATT). HPU@ATT composites based on S-1,1′-binaphthyl-2,2′-diol (S-BINOL) with different optical purity (O.P.) were characterized by Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and thermogravimetric analysis (TGA). The results indicate that the helical polyurethane has been successfully grafted onto the surfaces of the modified ATT without destroying the original crystalline structure of ATT. The rod-like nanoparticles were confirmed by transmission electron microscopy (TEM). Infrared emissivity values of HPU@ATT composites have been investigated, and the results indicate that the optical purity of monomer plays a very important role in the infrared emissivity for HPU@ATT owing to the effect of helical conformation and interchain hydrogen bonds. Along with the increased optical purity of S-BINOL, the infrared emissivity of HPU@ATT is reduced evidently. Infrared emissivity value of HPU@ATT based on S-BINOL with 100% optical purity is the lowest one (0.431).     

Measurement of absolute phase Shift on reflection of thin films using white-light spectral interferometry

A novel method to measure the absolute phase shift on reflection of thin film is presented utilizing a white-light interferometer in spectral domain. By applying Fourier transformation to the recorded spectral interference signal, we retrieve the spectral phase function Ф, which is induced by three parts： the path length difference in air L, the effective thickness of slightly dispersive cube beam splitter Teff and the nonlinear phase function due to multi-reflection of the thin film structure. We utilize the fact that the overall optical path difference （OPD） is linearly dependent on the refractive index of the beam splitter to determine both L and Teff. The spectral phase shift on reflection of thin film structure can be obtained by subtracting these two parts from Ф. We show theoretically and experimentally that our new method can provide a simple and fast solution in calculating the absolute spectral phase function of optical thin films, while still maintaining high accuracy.