一种实现MSD加法的光学方法

三值光学计算机系统结合光强与光的偏振方向表示三值信息,其核心器件——三值逻辑光学处理器是按照降值设计理论完成的,该处理器能完成所有19683种二元三值逻辑运算.本文旨在提出一种实现加法运算的新方法——用三值逻辑光学处理器实现加法.为了解决加法的串行进位延时问题,使用改良符号数表示进行数据编码,从而实现全并行无进位加法.用三值光学计算机与改良符号数表示相结合的方法实现加法既能够充分发挥三值光学计算机位数巨大的优势以及三值逻辑光学处理器能完成所有二元三值逻辑运算的特性,同时又发挥了改良符号数加法的无进位特点.经实验证明该方法具有可行性和正确性,是实现光学加法器的一种新思路.     

谐振式集成光学陀螺解调特性分析

基于激光器频率谱检测技术,沿着光的传输方向分析了光波在谐振式集成光学陀螺系统中的传播,结合输入信号特征,建立频域内的数学模型,通过数值仿真和实验得到了调频检测系统下的解调曲线。按照光的传输方向：激光器、声光晶体移频器、光波导环形谐振器、探测器,利用贝塞尔函数展开和光场耦合模理论分析了谐振式集成光学陀螺解调特性,及其调频调制检测系统解调输出信号与谐振频率偏差之间的关系。通过数值计算,分析了解调曲线的变化规律,得到了施加在激光器压电陶瓷驱动器上调制波形的最佳调制系数。在实验上搭建了激光器频率调制解调技术系统,得到了解调曲线。数值仿真和实验结果表明,当调制系数M=2时,线性工作区间斜率最大,解调曲线最好。实测形状与理论分析结果相符,从解调信号得到±2×10³ rad/s的陀螺动态范围。     

Effects of shaded facets on the performance of metal-coated etched diffraction grating demultiplexer

A finite-difference time-domain (FDTD) method combined with a periodic boundary condition is used to analyze the diffraction efficiency of an etched diffraction grating (EDG) demultiplexer coated with a metallic film at the backside. The numerical results show that the diffraction loss is mainly due to the scattering effect of shaded facets of a metal-coated grating at both the polarizations. However, the same shaded facets can produce a higher loss for a TM polarization than that for a TE polarization, which induces a higher polarization dependent loss (PDL) of the demultiplexer.     

锁相检测式二维小角度测量装置

介绍了一种新型的二维小角度检测装置。由于该装置采用了光电自准直结构,以高灵敏度的四象限硅光电探测器作为检测元件,采用交流调制,锁相放大的方法对信号进行了处理,所以有效地消除了直流漂移的影响,提高了稳定性和测试精度。分析了光斑的形状和大小对测试结果的影响,研制了专门的标定装置。首先由高精度的光电自准直仪标定测量角度与输出信号的关系,并将相关数据存入单片机,然后由软件拟合出关系曲线。测量时,既可自动显示角度的大小,同时也可以与计算机相连。该测试系统结构小巧,具有较高的测量精度。     

Superamphiphobic,light-trapping FeSe2 particles with a micro-nano hierarchical structure obtained by an improved solvothermal methodSuperamphiphobic,light-trapping FeSe2 particles with a micro-nano hierarchical structure obtained by an improved solvothermal methodSuperamphiphobic,light-trapping FeSe2 particles with a micro-nano hierarchical structure obtained by an improved solvothermal method

Wettability and the light-trapping effect of FeSe2 particles with a micro-nano hierarchical structure have been inves- tigated. Particles are synthesized by an improved solvothermal method, wherein hexadecyl trimetbyl ammonium bromide （CTAB） is employed as a surfactant. After modifying the particles with heptadecafluorodecyltrimethoxy-silane （HTMS）, we find that the water contact angle （WCA） of the FeSe2 particles increases by 6.1~ and the water sliding angle （WSA） decreases by 2.5~ respectively, and the diffuse reflectivity decreases 29.4% compared with similar FeSe2 particles synthe- sized by the conventional method. The growth process of the particles is analyzed and a growth scenario is given. Upon altering the PH values of the water, we observe that the superhydrophobic property is maintained quite consistently across a wide PH range of 1-14. Moreover, the modified particles were also found to be superoleophobic. To the best of our knowledge, there is no systematic research on the wettability of FeSe2 particles, so our research provides a reference for other researchers.     

离线测量钍快中子裂变反应率方法

钍快中子裂变反应率是钍铀燃料循环中的重要数据.为了测量基于聚变-裂变混合能源堆包层概念设计的钍样品在宏观中子学装置中的钍快中子裂变数据,发展了钍快中子裂变率的离线活化γ测量方法.通过测量232Th裂变碎片85mKr的β衰变产物85Rb发射的151.16 keV特征γ射线,并结合钍裂变产额数据,获得了钍样品装置中232Th裂变反应率的分布.详细介绍了此方法的原理和影响因素,并利用14 MeV的D-T中子源在贫铀球壳中开展了校验实验,实验不确定度为5.3%—5.5%.采用MCNP5程序和ENDF/B-VI及ENDF/B-VII数据库模拟计算的结果与实验结果在实验不确定度内基本符合,这证明该方法能够有效地模拟装置中232Th裂变反应率.     

Chemical shift anisotropy amplification

A new NMR experiment which allows a measurement of the chemical shift anisotropy (CSA) tensor under magic angle spinning (MAS) is described. This correlates a fast MAS spectrum in the omega2 dimension with a sideband pattern in omega1 in which the intensities mimic those for a sample spinning at a fraction of the rate omega r/N, and these sidebands result from an amplification by a factor N of the modulation caused by the CSA. Standard methods can be used to extract the principal tensor components from the omega1 sideband patterns, and the nature of the experiment is such that the use of a large number of t1 increments can be avoided without compromising the resolution of different chemical sites. The new experiment is useful for accurately measuring narrow shift anisotropies.     

黑腔靶中超热电子特性研究

近几年来,在“神光”装置上进行了1.053μm激光与平面靶及一系列柱形黑腔靶相互作用实验。用一台多道滤波—荧光X光能谱仪(FFS)测得各种靶发射的超热X射线谱,由谱推导超热电子温度T_h和超热电子总能量E_h当照射靶单束激光能量E_(tar)为400～670J、脉宽τ=650～1150ps时,发现黑腔内明显存在两群服从Maxwell分布高能电子(T_h=35～45keV;T_(hh)=150～350kev),而且E_(he)占E_(tar)的份额为10％～12％。实验还表明:腔内的E_(he)与非线性过程特征量(SRS)有较好的线性关系,因此推断出腔内超热电子产生的主要机制是受激Raman散射。在相同照射条件下,黑腔靶产生的超热电子比平面靶严重。     

Design of Enhanced Catalysts by Coupling of Noble Metals (Au,Ag) with Semiconductor SnO2 for Catalytic Reduction of 4‐Nitrophenol

The reduction of 4‐nitrophenol (Nip) into 4‐aminophenol (Amp) by NaBH₄, which is catalyzed by both binary and ternary yolk–shell noble‐metal/SnO₂ heterostructures, is reported. The binary heterostructures contain individual Au or Ag nanoparticles (NPs) and the ternary heterostructures contain both Au and Ag NPs. The Au@SnO₂ yolk–shell NPs are synthesized via a silica seeds‐mediated hydrothermal method. Subsequently, the Au@SnO₂@Ag and Au@SnO₂@Au yolk–shell–shell (YSS) NPs are synthesized, whereby SnO₂ is located between the Au and Ag NPs. The morphology, composition, and optical properties of the as‐prepared samples are analyzed. For the binary heterostructures, the rate of the reduction reaction increases with decreasing particle size. The catalytic results demonstrate the synergistic effect of Au and Ag in the ternary metal–semiconductor heterostructures, which is beneficial to the catalytic reduction of Nip into Amp. Both the binary and ternary heterostructures exhibit significantly better catalytic performances than the corresponding bare Au and Ag NPs. It is envisaged that the current synthesized strategy will promote further interest in the field of bimetal NP‐based catalysis.     

基于车载通信标准街道场景的电磁散射信道模型

针对室外无线信道视距(line of sight,LOS)/非视距(non-line of sight,NLOS)传输环境下的车到车(vehicular-to-vehicular,V2V)通信系统,本文提出了一种基于标准街道散射的统计信道模型,其移动发射机(mobile transmitter,MT)与移动接收机(mobile receiver,MR)处于运动状态,街道两旁分布的散射体固定.由几何模型出发又引入了一种随机的参考信道模型,其散射体有无穷多个,均以平行于街道两侧的散射条纹形式均匀分布在三维(three dimensional,3D)空间的一个二维(two dimensional,2D)矩形内部.在室外街道通信环境下,模型推导了散射信道中发射角(angle of departure,AOD)以及到达角(angle of arrival,AOA)的概率密度函数(probability density functions,PDFs)解析式;研究了多普勒功率谱密度(power spectral density,PSD)及其时间自相关函数(autocorrelation function,ACF);分析了模型多普勒参数以及街道散射体等因素对V2V通信系统性能的影响.与城市、农村的测量信道对比分析,表明本模型仿真的统计特性符合理论与实际,拓宽了室外V2V无线通信信道建模的研究.为评估室外V2V通信系统的传输特性、仿真无线通信系统提供了有力的研究工具.