Study of uranium contamination of ground water in Punjab state in India using X-ray fluorescence technique

The elemental concentration of uranium in the samples collected from the ground water and the canal water in the Bathinda district of Punjab state, India, have been investigated using X-ray fluorescence technique. The residues obtained after drying the water samples were analysed using the energy dispersive X-ray fluorescence spectrometer consisting of Mo-anode X-ray tube equipped with selective absorbers as an excitation source and an Si(Li) detector. The uranium concentration values in significant fraction of the shallow ground water samples from the hand pumps is found to be above the permissible level of 15?ppb recommended by World Health Organisation for the drinking water, and its values in the canal water samples are below 5?ppb. To investigate the flyash from the coal-fired thermal power plants as a possible source of ground water contamination, the water samples collected from the surroundings of the power plants and the flyash samples were also analyzed. The results rule out flyash as a source of uranium contamination. Agrochemical processes occurring in the calcareous soils in the region are the favoured potential source of uranium contamination of the ground water.     

Effects of functional groups on surface pressure-area isotherms of hydrophilic silicone polymers

Organic/inorganic hybrid silicone polymers are increasingly used in cosmetics, inks and paints, and fabric care applications owing to their special Si-O bond characteristics. Because of the presence of organic as well as inorganic groups, they show the properties of both, and the presence of hydrophobic as well as hydrophilic character makes them behave like a hybrid polymer. Though they are widely used, the utilization of hydrophilically modified silicones on a large scale has mainly been empirical due to lack of fundamental knowledge about variation in their properties with systematic change in their structure. The choice of moieties for hydrophilic modification of silicones in most of the earlier works has been nonionic based on ethylene oxide and propylene oxide groups, however, very little is known about their ionic counterparts. The current work focuses on understanding the behavior of functionally grafted silicone polymers with respect to the variation in the hydrophilic part of the grafting chain. Hydrophilically grafted silicone polymers form monolayers at the air-water interface, which are stabilized by interactions of functional groups with water. The present work examined the effects of functional group modifications on the conformational behavior of chains at the interface. It was observed that the shape of the chain depends on the available area at the interface (or surface pressure), and there are conformational changes with an increase in the number of molecules per unit area. While a poly(dimethylsiloxanes) (PDMS) chain may undergo stretched to helix transition as predicted earlier, this may not be the case for hydrophilically grafted chains. On the basis of the shape of the surface pressure-area isotherm and correlation with the scaling theory, a gradation in hydrophilicity of functional groups and hence modified silicone chains at the air-water interface is predicted.     

Electroluminescence from hybrid organic–inorganic LEDs based on thermally evaporated CdS thin films

Hybrid organic–inorganic light emitting devices combine the color purity and durability of inorganic light emitting diodes (LEDs) with high efficiency, flexibility and low processing cost of organic LEDs (OLEDs). A significant challenge is to incorporate inorganic nanocrystals inside the OLED structure. In the present work, thin films of CdS were successfully incorporated inside standard OLED structure using vacuum thermal evaporation technique. For the characterization of these films, they were deposited on plain glass plates at room temperature and studied using structural (XRD and TEM), morphological (SEM and AFM) and optical (UV and PL) techniques. The films were found to be composed of nanocrystals of CdS in which the size of the crystals increased with the increase in film thickness. The hybrid organic–inorganic LEDs showed improved luminance and efficiency as compared to the organic LED without CdS layers.     

Enhancement of light extraction efficiency of organic light emitting diodes using nanostructured indium tin oxide

Improved outcoupling efficiency of organic light emitting diodes (OLEDs) is demonstrated by incorporating a nanostructured indium tin oxide (NSITO) film between a conducting anode and a glass substrate. NSITO film was fabricated using rf-sputtering at oblique angle (85°). Significant reduction in refractive index and improved transmission of NSITO film was observed. OLEDs were then fabricated onto NSITO film to extract the ITO-glass waveguided modes. Extraction efficiency was enhanced by 80% without introducing any detrimental effects to operating voltage, current density, and angular invariance of emission spectra of OLEDs.     

Catalytic trimerization of isocyanates by neutral pentacoordinated silicon hydrides

Pentacoordinated hydrosilanes react with excess of aryl isocyanates to give isocyanurates under mild and neutral conditions. The catalytic species are the initially formed N-silylformamides, which incorporate three equivalents of isocyanate, and then rearrange to N-silylformamide and isocyanurates.     

Gross Dissolution of Natural Rhombohedral-shaped Calcite in Glacial Acetic Acid

Gross dissolution of natural rhombohedral-shaped calcite crystals in different concentrations of glacial acetic (0.3 to 3.4 M) diluted by distilled water is studied. Activation energy of reaction between calcite crystal and acetic acid is calculated and found constant. The preexponential factor is not constant with different concentrations. Weight loss per unit surface area versus concentration of acetic acid is plotted at various temperatures (30 to 55 °C). It is found that the maximum weight loss per unit surface area occurs with 2.5 M of glacial acetic acid for the above temperature range. The value of the pre-exponential factor is also maximum at 2.5 M of acetic acid. The maximum weight loss per unit surface area is explained with the help of ionic conductivity and viscosity of the etchant.     

Excitation of Forbidden Electronic Transitions in Atoms by Hermite–Gaussian Modes

Photoexcitation of trapped ions by Hermite–Gaussian (HG) modes from guided beam structures is proposed and investigated theoretically. In particular, simple analytical expressions for the matrix elements of induced atomic transitions are derived that depend both on the parameters of HG beams and on the geometry of an experiment. By using these general expressions, the ${}^2{S}_{1/2}\to {}^2{F}_{7/2}$ electric octupole (E3) transition is investigated in an Yb⁺ ion, localized in the low–intensity center of the HG₁₀ and HG₀₁ beams. It is shown how the corresponding Rabi frequency can be enhanced by properly choosing the polarization of incident light and the orientation of an external magnetic field, which defines the quantization axis of a target ion. The calculations, performed for experimentally feasible beam parameters, indicate that the achieved Rabi frequencies can be comparable or even higher than those observed for the conventional Laguerre–Gaussian (LG) modes. Since HG-like modes can be relatively straightforwardly generated with high purity and stability from integrated photonics, these results suggest that they may form a novel tool for investigating highly-forbidden atomic transitions.