Determination of Copper and Zinc Ions by Flame-AAS After Preconcentraction Using Sodium Dodecyl Sulfate Coated Alumina Modified with 3-((1H-Indol-3-yl)-3,4,5-trimethyl)-1H-indole

A sensitive and simple method for the simultaneous preconcentration of trace amount Cu²⁺ and Zn²⁺ ions in some real samples has been established, which is based on the sorption of Cu²⁺ and Zn²⁺ on 3‐((1H‐indol‐3‐yl)‐3,4,5‐trimethyl)‐1H‐indole (ITMI) loaded on sodium dodecyl sulfate (SDS) coated alumina. The metal absorbed on the complexes was eluted using 3 mol/L nitric acid. The influences of the analytical parameters including pH and sample volume were investigated. The effects of matrix ions on the retentions of the analytes were also examined. The recoveries of analytes were generally higher than 95% with a low RSD. The method has been successfully applied to content evaluation of these metals in real samples.     

Flotation-assisted dispersive liquid–liquid microextraction method for preconcentration and determination of trace amounts of cobalt: Orthogonal array design

A simple, rapid, and efficient flotation-assisted dispersive liquid–liquid microextraction method was developed for preconcentration of trace amount of cobalt(II) ions. In this technique, a mixture of toluene and methanol (20: 80, v/v) was injected through the septum in the bottom of a narrow-bore tube containing cobalt solution. Afterwards, the fine droplets of extraction solvent were formed and cobalt (as 1-nitroso-2- naphtol complex) was collected on the surface of solution by aeration. The effect of different variables on the extraction efficiency of cobalt such as pH of solution, ligand concentration and injection volume was investigated using orthogonal array design. At optimum conditions, the calibration curve was linear over the range of 10–1000 μg/L. The detection limit, relative standard deviation and enrichment factor were 3 μg/L, 3.9% (n = 10) and 120, respectively. The developed method was successfully applied to the determination of cobalt in water and drug samples.     

Multi‐responses optimization of simultaneous adsorption of methylene blue and malachite green dyes in binary aqueous system onto Ni:FeO(OH)‐NWs‐AC using experimental design: derivative spectrophotometry method

In this research, response surface methodology (RSM) approach using Central Composite Design (CCD) coupled by derivative spectrophotometry method was applied to develop mathematical model and optimize process parameters for simultaneous adsorption of methylene blue (MB) and malachite green (MG) from aqueous solution using Ni:FeO(OH) ‐ NWs‐AC. The optimal conditions to adsorption of MB and MG in binary mixture solution from aqueous solution were found at pH 8.0, MB concentration 20 mg L^‐1, MG concentration 20 mg L^‐1, adsorbent dosage 0.033 g and contact time 40 min. At these conditions, high adsorption efficiency (99.39% and 100.0% for MB and MG, respectively) was achieved. Among experimental equilibrium, Langmuir isotherm model fitted well with maximum monolayer adsorption capacity of 28.6 and 29.8 mg g^‐1 for MB and MG, respectively. The adsorption kinetic data followed pseudo second‐order kinetics for MB and MG dyes.     

Electrospinning preparation of NiO/ZnO composite nanofibers for photodegradation of binary mixture of rhodamine B and methylene blue in aqueous solution: Central composite optimization

One‐dimensional nanofiber of p‐type NiO/n‐type ZnO heterojunctions with various molar ratios of Ni to Zn at different calcination temperatures were successfully synthesized using the electrospinning method, and they were fully characterized. The photocatalysts thus obtained were applied in aqueous solutions for rhodamine B (RDB) and methylene blue (MB) degradation. The p–n heterojunctions built among the cubic structure NiO and hexagonal structure ZnO in the composite nanofiber are responsible for generation of electrons and holes and subsequently superoxide and hydroxyl radical production by carriers which lead to degradation of the dyes in solution. The composite nanofibers (ZnNi1) calcined at 550 °C for 3 h showed the highest photocatalytic activity for degradation of the dyes in aqueous solution. The optimum values were found to be 180 min, 7.0, 1 g l^?1 and 3.0 and 3.0 mg l^?1 for irradiation time, pH, photocatalyst dosage and initial concentration of RDB and MB, respectively. For these optimum conditions, the photocatalytic degradation of RDB and MB was found to be 99.37 and 98.44%, respectively. The maximum photodegradation of RDB and MB using ZnNi1 was 59.41 and 65.43%, respectively. First‐order kinetics based on the Langmuir–Hinshelwood model successfully fitted the experimental data.     

Optimizing adsorptive removal of malachite green and methyl orange dyes from simulated wastewater by Mn‐doped CuO‐Nanoparticles loaded on activated carbon using CCD‐RSM: Mechanism,regeneration, isotherm,kinetic, and thermodynamic studies

In the present work, Mn‐doped CuO‐NPs‐AC was prepared by a simple method, characterized using various techniques such as FESEM, EDX, XRD, PSD, and pH_pzc and finally used for the adsorption of malachite green (MG) and methyl orange (MO) in a number of single and binary solutions. A series of adsorption experiments were conducted to investigate and optimize the influence of various factors (such as different pH, concentration of MG and MO, adsorbent mass, and sonication time) on the simultaneous adsorption of MG and MO using response surface methodology. Under optimal conditions of pH 10, adsorbent dose of 0.02 g, MG concentration of 30 mg L^?1, MO concentration of 30 mg L^?1, and sonication time of 4.5 min at room temperature, the maximum predicted adsorption was observed to be 100.0%, for both MG and MO, showing that there is a favorable harmony between the experimental data and model predictions. The adsorption isotherm of MO and MG by Mn‐doped CuO‐NPs‐AC could be well clarified by the Langmuir model with maximum adsorption capacity of 320.69 mg g^?1 and 290.11 mg g^?1 in the single solution and 233.02 mg g^?1 and 205.53 mg g^?1 in the binary solution by 0.005 g of adsorbent mass for MG and MO, respectively. Kinetic studies also revealed that both MG and MO adsorption were better defined by the pseudo‐second order model for both solutions. In addition, the thermodynamic constant studies disclosed that the adsorption of MG and MO was likely to be influenced by a physisorption mechanism. Eventually, the reusability of the Mn‐doped CuO‐NPs‐AC after six times showed a reduction in the adsorption percentage of MG and MO.     

Development of an Efficient Procedure for Determination of Copper,Zinc and Iron after Solid Phase Extraction on 3‐(1‐(1‐H‐Indol‐3‐yl)‐3‐Phenylallyl)‐1H‐Indole Loaded on Duolite XAD 761

A method for the simultaneous preconcentration of Cu²⁺,Zn²⁺ and Fe³⁺ ions, in some food samples has been reported. The method is based on the adsorption of 3‐(1‐(1‐H‐indol‐3‐yl)‐3‐phenylallyl)‐1H‐indole (IPAI) loaded on Duolite XAD 761. The metal ions adsorbed on the modified solid phase resin are eluted using 6 mL of 4 mol L^?1 nitric acid. The influences of the analytical parameters including pH and amount of ligand and solid phase and type and amount of surfactant and sample volume on the metal ions recoveries were investigated. The effects of matrix ions on the retentions of the analytes were also examined. The recoveries of analytes were generally higher than 95% with a RSD lower than 5%. The method has been successfully applied for these metals content evaluation in some real samples.     

Preparation of Iodide Selective Carbon Paste Electrode with Modified Carbon Nanotubes by Potentiometric Method and Effect of CuS‐NPs on Its Response

In this research, multiwalled carbon nanotubes (MWCNTs) was oxidized and chemically modified through reaction with 3‐(trimethoxysilyl)propan‐1‐amine (TMSPA) and their subsequent reaction with 2‐hydroxy‐3‐methoxy benzaldehyde. Subsequently, this material was metalized by reaction with copper acetate that lead to formation and impergeation of 2‐methoxy‐6‐((3‐(trimethoxysilyl)propylimino)methyl)phenol MMSPIMP? MWCNT‐Cu. This novel material was identified with different techniques such as SEM and FT‐IR analysis. In this work, the reported material are exhibited high accurate and repeatable monitoring of iodide due to its high surface area with various reactive centre. It exhibited selectivity for iodide over the wide linear dynamic range between 1.8×10^?6 and 1.15×10^?1 M, with a Nernstian slope of ?59.12±0.7 mV per decade of activity and detection limit of 1.8×10^?6 M. Copper sulfide nanoparticles were prepared and their effect on the electrode response was investigated. The results were improved in the presence of nanoparticles with fast and stable response, good reproducibility, long‐term stability, high selectivity over the presence of common organic and inorganic anions, high detection limit and dynamic range. The proposed sensor has been applied as potentiometric determination of some iodine species over a pH range of 2.5–10.     

Zinc oxide nanorod‐loaded activated carbon for ultrasound‐assisted adsorption of safranin O: Central composite design and genetic algorithm optimization

This paper focuses on the development of an effective methodology to obtain the optimum ultrasonic‐assisted removal of a dye, safranin O (SO), under optimum conditions that maximize the removal percentage, using ZnO nanorod‐loaded activated carbon (ZnO‐NRs‐AC) in aqueous solution. Central composite design coupled with genetic algorithm was used for parameter optimization. The effects of variables such as pH, initial dye concentration, mass of ZnO‐NRs‐AC and sonication time were studied. The interactive and main effects of these variables were evaluated using analysis of variance. The structural and physicochemical properties of the ZnO‐NRs‐AC adsorbent were investigated using field emission scanning electron microscopy and X‐ray diffraction. Adsorption equilibrium data were fitted well with the Langmuir isotherm and the maximum monolayer capacity was found to be 32.06 mg g^?1. Studies of the adsorption kinetics of the SO dye showed a rapid sorption dynamic with a ^pseudo‐second‐order kinetic model, suggesting a chemisorption mechanism.     

Sonophotocatalytic treatment of diazinon using visible light‐driven Ce:Cu‐1,4‐BDOAH2 photocatalyst in a batch‐mode process: Response surface methodology and optimization

Cu–1,4‐benzenedioxyacetic acid (Cu‐1,4‐BDOAH₂) with a narrow band gap (2.52 eV) was synthesized and doped with Ce to afford Ce:Cu‐1,4‐BDOAH₂ as an efficient photocatalyst with narrower band gap (2.39 eV). The prepared Cu‐1,4‐BDOAH₂ and Ce:Cu‐1,4‐BDOAH₂ were characterized using Fourier transform infrared, energy‐dispersive X‐ray, diffuse reflectance spectroscopies, scanning electron microscopy and X‐ray diffraction. The sonophotocatalytic degradation of diazinon was carried out in a batch‐mode reactor using visible light‐driven Ce:Cu‐1,4‐BDOAH₂ photocatalyst as well as ultrasonic irradiation. The narrow band gap of the photocatalyst means that it can be activated under visible light illumination. The effects of operational parameters such as initial diazinon concentration (5–25 mg l^?1), pH (2–10), photocatalyst dosage (10–30 mg) and irradiation time (10–30 min) on the sonophotocatalytic degradation efficiency were investigated using central composite design under response surface methodology. The optimization process was studied using desirability function and the results indicated 99.8% degradation, which was obtained at optimum values of 25 mg l^?1, 6, 20 mg and 20 min for the initial concentration of diazinon, pH, photocatalyst dosage and irradiation time, respectively. Reusability experiments of Ce:Cu‐1,4‐BDOAH₂ photocatalyst showed that it is quite stable with excellent catalytic activity even after five cycles.     

Silver nanoparticle loaded on activated carbon and activated carbon modified with 2-(4-isopropylbenzylideneamino)thiophenol (IPBATP) as new sorbents for trace metal ions enrichment

The efficiencies and performances of silver nanoparticle loaded activated carbon modified with 2-(4-isopropylbenzylideneamino)thiophenol (IPBATP-Ag-NP-AC) and activated carbon modified with IPBATP (IPBATP-AC), as new sorbents, were evaluated for separation and preconcentration of Cu²⁺, Zn²⁺, Co²⁺, Cd²⁺ and Pb²⁺ ions from real environmental samples. The retained metals content was reversibly eluted using 5?mL of CH₃COOH (6.0?mol?L^?1) and/or 10?mL of 4.0?mol?L^?1 HNO₃ for IPBATP-Ag-NP-AC and IPBATP-AC, respectively. The experimental parameters influence the recoveries of metal ions including pH, amounts of ligand and supports, condition of eluents, sample and eluent flow rates of has been investigated. The preconcentration factors were found to be 100 for Zn²⁺, Cd²⁺, Co²⁺, Cu²⁺ and 50 for Pb²⁺ ions using IPBATP-Ag-NP-AC, and 50 for Zn²⁺, Cd²⁺, Co²⁺, Cu²⁺ and 25 for Pb²⁺ ions using IPBATP-AC. The detection limit of both SPE-based sorbents was between 1.6–2.5?ng?mL^?1 for IPBATP-AC and 1.3–2.5?ng?mL^?1 for IPBATP-Ag-NP-AC. The proposed methods have been successfully applied for the extraction and determination of the understudy metal ions content in some real samples with extraction efficiencies higher than 90% and relative standard deviations (RSD) lower than 2.4%.