The effect of carrier gas flow rate on the growth of MoS<Subscript>2</Subscript> nanoflakes prepared by thermal chemical vapor deposition

Molybdenum disulfide nanoflakes (MoS₂) are superior material for their semiconducting properties. For bulk and monolayer MoS₂ the band gap changes from indirect-to-direct, respectively. So, it exhibits promising prospects in the applications of optoelectronics and valleytronics, such as solar cells, transistors, photodetectors, etc. In this research, the influence of different Ar flow rates as the carrier gas, is investigated for growing MoS₂ nanoflakes on silicon substrates using one-step thermal chemical vapor deposition by simultaneously evaporating of solid sources like sulfur and molybdenum trioxide powders. The structural and optical properties of the obtained nanoflakes are assessed by using X-ray diffraction pattern, scanning electron microscopy, UV–visible absorption, photoluminescence and Raman spectroscopy. It is shown that, Ar gas flow rate is strongly affects on the final products as few-layer MoS₂ structures. Moreover, the abundance of MoS₂ in comparison to MoO₂ and MoO₃ structures, in the obtained nanoflakes, is influenced by the Ar flow rate.     

Effect of process variables on mechanical properties of polyurethane/clay nanocomposites

This paper addresses the effects of operating variables on mechanical properties of polyurethane/clay nanocomposites including tensile strength, abrasion resistance, and hardness. The variables were prepolymer type, clay cation, clay content, and prepolymer–clay mixing time. The experiments were carried out based on the design of experiments using Taguchi methods. The nanocomposites were synthesized via in situ polymerization starting from two different types of prepolymers (polyether‐ and polyester‐types of polyol reacted with toluene diisocyanate), and methylene‐bis‐ortho‐chloroanilline (MOCA) as a chain extender/hardener. Montmorillonite with three types of cation (Na⁺, alkyl ammonium ion, and MOCA) were examined. Among the parameters studied, prepolymer type and clay cation have the most significant effects on mechanical properties. Polyester nanocomposites showed larger improvements in mechanical properties compared to polyether materials due to higher shear forces exerted by polymer matrix on clay aggregates during polymer–clay mixing. The original MMT with Na⁺ cation results in weak improvements in mechanical properties compared to organoclays. It is observed that the stress and elongation at break, and abrasion resistance of the nanocomposite samples can be optimized with 1.5% of clay loading. The morphology and chemical structure of the optimum sample were examined by X‐ray diffraction and FT‐IR spectroscopy, respectively. Copyright © 2009 John Wiley & Sons, Ltd.     

Surface Modification of TiO2 Nanoparticles with Vitamin B12: Relationships between Vitamin B12 Content and Its Optical Properties

Anatase TiO₂ nanoparticles (NPs) with particle size of 10–20 nm were prepared via sol gel technique. The as‐synthesized NPs were immerged in vitamin B₁₂ (VB₁₂) solutions with different concentrations. The in‐ fluences of the solution concentration on photoluminescence and photocatalytic activity of the modified NPs were studied. Fourier transform infrared spectroscopy (FTIR) results demonstrated that TiO₂ NPs adsorb VB₁₂ molecules and that a new band is formed at ～2300 cm^?1. The VB₁₂ loading process led to dimin‐ ishing of the aggregation of NPs and formation of a fibre shape structure. The best photoactivity and PL effect among the modified samples was related to sample ‘d’. The optimum processing conditions to achieve this sample was found to be VB₁₂ concentration of 5 g/L.     

Yolk–shell microspheres assembled from Preyssler‐type NaP5W30O11014− polyoxometalate and MIL‐101(Cr) metal–organic framework: A new inorganic–organic nanohybrid for fast and selective removal of cationic organic dyes from aqueous media

Novel inorganic–organic yolk–shell microspheres based on Preyssler‐type NaP₅W₃₀O₁₁₀^14? polyoxometalate and MIL‐101(Cr) metal–organic framework (P₅W₃₀/MIL‐101(Cr)) were synthesized by reaction of K_12.5Na_1.5[NaP₅W₃₀O₁₁₀], Cr(NO₃)₃·9H₂O and terephthalic acid under hydrothermal conditions at 200°C for 24 h. The as‐prepared yolk–shell microspheres were fully characterized using various techniques. All analyses confirmed the incorporation of the Preyssler‐type NaP₅W₃₀O₁₁₀^14? polyoxometalate into the three‐dimensional porous MIL‐101(Cr) metal–organic framework. The results revealed that P₅W₃₀/MIL‐101(Cr) demonstrated rapid adsorption of cationic methylene blue (MB) and rhodamine B (RhB) with ultrahigh efficiency and capacity, as well as achieving rapid and highly selective adsorption of MB from MB/MO (MO = methyl orange), MB/RhB and MB/RhB/MO mixtures. The P₅W₃₀/MIL‐101(Cr) adsorbent not only exhibited a high adsorption capacity of 212 mg g^?1, but also could quickly remove 100% of MB from a dye solution of 50 mg l^?1 within 8 min. The effects of some key parameters such as adsorbent dosage, initial dye concentration and initial pH on dye adsorption were investigated in detail. The equilibrium adsorption data were better fitted by the Langmuir isotherm. The adsorption kinetics was well modelled using a pseudo‐second‐order model. Also, the inorganic–organic hybrid yolk–shell microspheres could be easily separated from the reaction system and reused up to four times without any change in structure or adsorption ability. The stability and robustness of the adsorbent were confirmed using various techniques.     

NiFe2O4@SiO2@Cu3(BTC)2 nanocomposite as a magnetic metal–organic framework

A new magnetic metal–organic framework (MOF), namely, NiFe₂O₄@SiO₂@Cu₃(BTC)₂, was synthesized via an in situ method using Fe(NO₃)₃, Ni(NO₃)₂, CuN₂O₆, TEOS, (3-aminopropyl)triethoxysilane, and benzene-1,3,5-tricarboxylic acid. Three different samples were fabricated according to a formula; xNiFe₂O₄@(100 − x)SiO₂@Cu₃(BTC)₂, where x = 10, 30, and 50. The integration of the intrinsic characteristic of Cu₃(BTC)₂ as an MOF with strong magnetic properties of NiFe₂O₄ could lead to an exquisite material with specific behaviors. X-ray diffraction (XRD), Fourier transform infrared (FTIR), scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET), diffuse reflectance spectroscopy (DRS), photoluminescence (PL), vibrating sample magnetometer (VSM), transmission electron microscopy (TEM), and simulated thermal analyzer (STA) were utilized to characterize the mentioned samples. Results approved that the synthesized compounds were composed of SiO₂ and Cu-MOF and NiFe₂O₄ crystalline phases with rod-like morphology. The similarity between the morphology of the synthesized samples and Cu-MOF approved that an appropriate fabrication method has been selected. This fact led to observe mesoporous composites with 38–90 m² g⁻¹ specific surface area. PL spectroscopy confirmed the near bandgap emission, ligand-to-metal charge transfer, and metal-to-ligand charge transfer. Although all the samples had magnetic hysteresis, the highest magnetization was seen in the 50NiFe₂O₄@SiO₂@Cu₃(BTC)₂ sample. This composite compound with a magnetization value of 2 emu g⁻¹ at 8000 Oe and a specific surface area of 90 m² g⁻¹ could be classified as a magnetic MOF (MMOF). STA results suggested that 400°C is the highest operating temperature for this compound.     

A fast and sensitive nanosensor based on MgO nanoparticle room-temperature ionic liquid carbon paste electrode for determination of methyldopa in pharmaceutical and patient human urine samples

In this study, we describe an ionic liquid–MgO nanoparticle modified carbon paste electrode (MgO/NPs/IL/CPE) was used as a simple, fast, and sensitive tool for the investigation of the electrochemical oxidation of methyldopa (MDOP) using voltammetric methods. The MgO/NPs was characterized with different methods such as TEM, SEM, and XRD. The oxidation peak potential of the MDOP at a surface of MgO/NPs/IL/CPE appeared at 450 mV that was about 100 mV lower than the oxidation peak potential at the surface of the traditional carbon paste electrode (CPE) under similar conditions. The electro-oxidation of MDOP occurred in a pH-dependent 2e^? and 2H⁺ process, and the electrode reaction followed a diffusion-controlled pathway. Under optimal conditions at pH 7.0, the anodic peak currents increased linearly with the concentration of MDOP in the range of 0.08–380 μmol L^?1 with a detection limit of 0.03 μmol L^?1 (3σ). The proposed sensor was successfully applied to the determination of MDOP in real samples such as drug and urine.     

Supramolecular Assembly of Poly(propyleneimine) Dendrimers Driven By Simple Monovalent Counterions

The self‐assembly of semiglobular, positively charged poly(propyleneimine) (PPI) dendrimers with small monovalent counterions (e.g., Cl^?) in water/acetone mixtures was investigated. We showed that PPI dendrimers can assemble into hollow, spherical, single‐layered blackberry‐type structures mediated by the presence of monovalent counterions. The effects on the assembly of changing the solvent polarity and adjusting the pH were further investigated to confirm the presence of electrostatic interactions and hydrogen bonding as the driving forces. Results showed that PPI dendrimers form stable, hollow spheres in 5–20 % v/v acetone/water and that the size of the spheres decreases monotonically as the solvent polarity and/or the charge on the dendrimers (i.e., lower solution pH) increases. This is the first example to show that small monovalent counterions can trigger attraction among PPI dendrimers (or broadly defined polyelectrolytes) that is strong enough to bring them together to form large, stable supramolecular assemblies, which indicates that these organic macroions have similar solution behavior to more‐well‐defined inorganic molecular macroions.