On the phase field modeling of crack growth and analytical treatment on the parameters

Continuum Mechanics and Thermodynamics - A thermodynamically consistent phase field model for crack propagation is analyzed. The thermodynamic driving force for the crack propagation is derived...     

Double covers of Kummer surfaces

Besides its construction as a quotient of an abelian surface, a Kummer surface can be obtained as the quotient of a K3 surface by a -action. In this paper, we classify all such K3 surfaces. Our classification is expressed in terms of period lattices and extends Morrison’s criterion of K3 surfaces with a Shioda–Inose structure. Moreover, we list all the K3 surfaces associated to a general Kummer surface and provide very geometrical examples of this phenomenon.     

Use of organofunctionalized nanoporous silica gel to improve the lifetime of carbon paste electrode for determination of copper(II) ions

A new functionalized nanoporous silica gel with dipyridyl group (DPNSG) was synthesized. Then, the potentiometric response of the copper(II) ion was investigated at a carbon paste electrode chemically modified with this newly designed functionalized nanoporous silica gel. The electrodes with DPNSG proportions of 15.0% (w/w) demonstrated very stable potentials. Calibration plots with Nernstian slopes for Cu²⁺ were observed, 28.4 (±1.0) mV decade⁻¹, over a wide linear concentration range (1.0 × 10⁻⁷ to 1.0 × 10⁻² M). The electrode exhibited a detection limit of 8.0 × 10⁻⁸ M. Moreover, the selectivity coefficients measured by the match potential method in acetate buffer, pH 5.5, were investigated. The electrode presented a response time of ∼50 s, high performance, high sensitivity in a wide range of cation activities and good long-term stability (more than 9 months). The method was satisfactory and was used to determine the copper ion concentration in waste waters, contaminated by this metal.     

Time-weighted average water sampling with a diffusion-based solid-phase microextraction device

A new diffusion-based solid-phase microextraction (SPME) time-weighted average (TWA) field water sampling device was developed and investigated by field trial. The sampler is constructed with copper tube and caps and a commercial SPME fiber assembly. The device possesses all advantages of SPME; it is solvent-free, reusable, combines sampling, isolation and enrichment into one step, and the fiber can be directly injected into a gas chromatograph for analysis with a commercial SPME fiber holder, without further treatment. Field trials in Laurel Creek (Waterloo, Ont., Canada) and Hamilton Harbour (Hamilton, Ont., Canada) illustrated that the device is durable, easy to deploy, and the mass uptake of the device is independent of the face velocity. The device provides good precision [relative standard deviations (RSDs) are less than 20%] and the data obtained with this device are quite comparable to those obtained with the spot sampling method, which demonstrates that the newly developed SPME water sampling device is suitable for long-term monitoring of organic pollutants in water.     

Adsorptive Stripping Voltammetric Determination of Nanomolar Concentration of Cerium(III) at a Carbon Paste Electrode Modified by N′‐[(2‐Hydroxyphenyl)Methylidene]‐2‐Furohydrazide

The aim of this work was to obtain an adsorptive stripping voltammetric method for the Ce(III) determination at a carbon paste electrode, chemically modified with N'‐[(2‐hydroxyphenyl)methylidene]‐2‐furohydrazide (NHMF). The electroanalytical procedure comprised two steps: the Ce(III) chemical accumulation at ?200 mV followed by the electrochemical detection of the Ce(III)/NHMF complex, using anodic stripping voltammetry. The factors, influencing the adsorptive stripping performance, were optimized including the modifier quantity in the paste, the electrolyte concentrations, the solution pH and the accumulation potential or time. The resulting electrode demonstrated a linear response over a wide range of Ce(III) concentration (5.0–90 nmol dm^?3). The detection limit was found to be 0.8 nmol dm^?3 on the basis of a signal to noise ratio of 3. The precision for six determinations of 10 and 55 nmol dm^?3 Ce(III) was 5.6% and 2.1% (relative standard deviation), respectively. Application of the procedure to the determination of cerium in phosphate rock and wastewater samples gave good results.     

Spherical Kadomtsev-Petviashvili Solitons in a Suprathermal Complex Plasma

The nonlinear aspects of nonplanar dust acoustic (DA) solitary waves are investigated in an unmagnetized complex plasma comprising of cold dust grains, kappa-distributed ions as well as electrons. The nonplanar DA solitons are studied based on the reductive perturbation technique. It is shown that the evolution of DA solitons is governed by a spherical Kadomtsev-Petviashvili (sKP) equation and then the impact of suprathermality on the spatial structure as well as the nature of DA soliton is studied. It seems that the properties of DA solitons in nonplanar geometry are quite different from that of the planar solitons.     

Coreflooding Studies to Investigate the Potential of Carbonated Water Injection as an Injection Strategy for Improved Oil Recovery and CO<Subscript>2</Subscript> Storage

Carbonated water injection (CWI) is a CO₂-augmented water injection strategy that leads to increased oil recovery with added advantage of safe storage of CO₂ in oil reservoirs. In CWI, CO₂ is used efficiently (compared to conventional CO₂ injection) and hence it is particularly attractive for reservoirs with limited access to large quantities of CO₂, e.g. offshore reservoirs or reservoirs far from large sources of CO₂. We present the results of a series of CWI coreflood experiments using water-wet and mixed-wet Clashach sandstone cores and a reservoir core with light oil (n-decane), refined viscous oil and a stock-tank crude oil. The experiments were carried out to assess the performance of CWI and to quantify the level of additional oil recovery and CO₂ storage under various experimental conditions. We show that the ultimate oil recovery by CWI is higher than the conventional water flooding in both secondary and tertiary recovery methods. Oil swelling as a result of CO₂ diffusion into the oil and the subsequent oil viscosity reduction and coalescence of the isolated oil ganglia are amongst the main mechanisms of oil recovery by CWI that were observed through the visualisation experiments in high-pressure glass micromodels. There was also evidence of a change in the rock wettability that could also influence the oil recovery. The coreflood test results also reveal that the CWI performance is influenced by oil viscosity, core wettability and the brine salinity. Higher oil recovery was obtained with the mixed-wet core than the water-wet core, with light oil than with the viscous oil and low salinity carbonated brine than high-salinity carbonated brine. At the end of the flooding period, an encouraging amount of the injected CO₂ was stored in the brine and the remaining oil in the form of stable dissolved CO₂. The experimental results clearly demonstrate the potential of CWI for improving oil recovery as compared with the conventional water flooding (secondary recovery) or as a water-based EOR (enhanced oil recovery) method for watered out reservoirs.     

Comparison of theoretical and experimental results for band-gap-graded CZTSSe solar cell

The simulation of CZTSSe solar cells is presented in this paper. The simulation results are in reasonable agreement with the experimental data, indicating the reliability of simulation results. New structure is proposed to increase the functionality of the cell. Improved functional performances are achieved by inserting a P-Silicon (P-Si) layer as back surface field. Simulation results suggest that by inserting this P-Si layer, efficiency of the CZTSSe solar cell increases from 12.6% to 16.59%, which is a significant improvement. For the champion cell J_SC = 36.27 mA/cm², V_OC = 0.625 V and FF = 73.11% has been achieved.     

Numerical simulation of an innovated building cooling system with combination of solar chimney and water spraying system

In this study, passive cooling of a room using a solar chimney and water spraying system in the room inlet vents is simulated numerically in Yazd, Iran (a hot and arid city with very high solar radiation). The performance of this system has been investigated for the warmest day of the year (5 August) which depends on the variation of some parameters such as water flow rate, solar heat flux, and inlet air temperature. In order to get the best performance of the system for maximum air change and also absorb the highest solar heat flux by the absorber in the warmest time of the day, different directions (West, East, North and South) have been studied and the West direction has been selected as the best direction. The minimum amount of water used in spraying system to set the inside air averaged relative humidity <65 % is obtained using trial and error method. The simulation results show that this proposed system decreases the averaged air temperature in the middle of the room by 9–14 °C and increases the room relative humidity about 28–45 %.