Channel weights for speech recognition in cochlear implant users

The purpose of this study was to develop and validate a method of estimating the relative "weight" that a multichannel cochlear implant user places on individual channels, indicating its contribution to overall speech recognition. The correlational method as applied to speech recognition was used both with normal-hearing listeners and with cochlear implant users fitted with six-channel speech processors. Speech was divided into frequency bands corresponding to the bands of the processor and a randomly chosen level of corresponding filtered noise was added to each channel on each trial. Channels in which the signal-to-noise ratio was more highly correlated with performance have higher weights, and conversely, channels in which the correlations were smaller have lower weights. Normal-hearing listeners showed approximately equal weights across frequency bands. In contrast, cochlear implant users showed unequal weighting across bands, and varied from individual to individual with some channels apparently not contributing significantly to speech recognition. To validate these channel weights, individual channels were removed and speech recognition in quiet was tested. A strong correlation was found between the relative weight of the channel removed and the decrease in speech recognition, thus providing support for use of the correlational method for cochlear implant users.     

Effects of structural factors on filtering operation of photonic band gap air bridges with circular and square shape holes

Applying the finite element analysis on the photonic band-gap materials with a cavity at the center for two types of structures, circular and square shape holes with the same cross section, filtering operation of these structures is simulated and compared. Any variations in the structure parameters, such as cavity length, period and hole dimensions, change the transmission peak and frequency bandwidth of these structures. The effects of rotation of square holes and ellipticity of circular holes on filtering operation are studied. Other new structures such as tapered, shortened and non-uniform rotated structures are proposed and filtering characteristics of them are discussed. It is found that, by rotating the square holes around their axis, it is possible to have a blue-shift in the transmission peak wavelength without notable variations in the filter peak and bandwidth. It is concluded that the increase of elliptical holes diameters length causes the decrease of transmission peak and increase of bandwidth with blueshift of the peak wavelength. This shift is larger for one of the elliptical diameter values considered that is along the waveguide length.     

Synthesis of bio‐based internal and external cross‐linkers based on tannic acid for preparation of antibacterial superabsorbents

Recent researches focus on the synthesis of new cross‐linkers from natural resources. In the current work, functionalized tannic acid was employed as a replacement of petroleum‐based cross‐linkers because of its outstanding biochemical properties. Alkene‐ and epoxy‐functionalized tannic acids were synthesized as internal and external cross‐linkers, respectively. Cross‐linker structures were characterized with Ft‐IR and ¹HNMR analysis. Different amounts, as well as different numbers of alkene functional group, were incorporated during the superabsorbent synthesis. Moreover, the internal cross‐linked superabsorbent was surface cross‐linked with different amounts of epoxy‐functionalized tannic acid and increased the absorbency under load about 10 g g^?1. Free absorption properties in water and saline solution, absorbency under load, and rheological properties of superabsorbents were investigated. In addition, the antibacterial activity of the internal and external cross‐linked superabsorbent was studied against Escherichia coli and Staphylococcus aureus bacteria via different methods and compared with that of conventional superabsorbent.     

Trigger devices for pseudospark switches

Effective triggering of pseudospark switches with long lifetime and low jitter remains an important problem. This paper presents results of investigations of trigger methods for pseudospark switches. based upon pulsed glow discharges in planar and hollow electrode geometry for charge injection. The influence of different wiring and geometries of the electrodes for preionization is investigated. The effect of additional blocking potentials in the hollow cathode to improve different trigger systems was measured. Calculations of the static potential in the hollow cathode with or without blocking potential are compared with parameters of the discharge     

Pseudospark switches-technological aspects and application

We report results of the development of fast closing switches, so-called pseudospark switches, at Erlangen University. Two different parameter regimes are under investigation: medium power switches (32 kV anode voltage, 30 kA anode current and 0.02 C charge transfer per shot) for pulsed gas discharge lasers and high power switches (30 kV anode voltage, 400 kA anode current and 3.4 C charge transfer per shot) for high current applications. The lifetime of these switches is determined by erosion of the cathode. The total charge transfer of devices with one discharge channel is about 220 kC for the medium and 27 kC for the high power switch. At currents exceeding 45 kA a sudden increase in erosion rate was observed. Multichannel devices are suited to increase lifetime as the current per channel can be reduced. Successful experiments with radial and coaxial arrangements of the discharge channels were performed. In these systems the discharge channels move due to magnetic forces. A skilful use of this phenomena will result in a considerably increase of switch lifetime. Multigap devices enable an increase of anode voltage. A three gap switch has run reliably at an anode voltage of 70 kV     

Influence of MgO in the CO2 – steam reforming of methane to syngas by NiO/MgO/ α-Al2O3 catalyst

Simultaneous steam and CO₂ reforming of methane to syngas (H₂and CO) over NiO/MgO/a-Al₂O₃ catalyst have been investigated at different MgO wt.%. The catalyst has been characterized by temperature-programmed reduction and XRD techniques. Addition of MgO reduced the carbon deposition and energy consumption. The stability and less coking on MgO-promoted catalysts are attributed to the lewis basicity of MgO.     

Kinetics and Mechanism of Oxidation of 1-Phenylsemicarbazide by Peroxydisulphate

Kinetics of oxidation of 1-phenylsemicarbazide (PSC) by peroxydisulphate ion (PDS) have been carried out where by the pseudo first order condition was verified at large excess of PDS concentration. The rate of the reaction was followed spectrophotometrically, The stoichiometry was found to be 1:1 where 1-phenylazoformamide is the oxidation product. The effect of acidity on the rate of oxidation was investigated for different temperatures. The parameters of activation ΔG*, ΔH* and ΔS* were computed for both hydrogen ion depedent and hydrogen ion independent reaction pathes. A free radical mechanism was proposed.     

Optimal economic load dispatch based on wind energy and risk constrains through an intelligent algorithm

This article focus on optimal economic load dispatch based on an intelligent method of shark smell optimization (SSO). In this problem, the risk constrains has been considered which has root in uncertainity and unpredictable behavior of wind power. Regarding to increasing of this clean energy in power systems and un‐dispatchable behavior of wind power, its conditional value at risk index considered in this article which consists of loss from load and "spilling" wind energy connected with unpredictable imbalances among generation and load. This problem has been considered as an optimization problem based on SSO that evaluate the balance between cost and risk. This algorithm is based on distinct shark smell abilities for localizing the prey. In sharks' movement, the concentration of the odor is an important factor to guide the shark to the prey. In other words, the shark moves in the way with higher odor concentration. This characteristic is used in the proposed SSO algorithm to find the solution of an optimization problem. Effectiveness of the proposed method has been applied over 30‐bus power system in comparison with other techniques. © 2016 Wiley Periodicals, Inc. Complexity 21: 494–506, 2016     

Estimation of Mean and Covariance Operator for Banach Space Valued Autoregressive Processes with Dependent Innovations

In this paper we study autoregressive processes of order 1 with values in a separable Banach space it B. Such ARB(1)-processes are defined by the recursion equation