Selective back-extraction and preconcentration of zinc(II) from metal-1,3,5-triketone extracts prior to its determination by flame atomic absorption spectrometry

A simple back-extraction method was developed for the separation and preconcentration of trace levels of zinc from different matrices. Ethyl-2-(4-methoxybenzoyl)-3-(4-methoxyphenyl)-3-oxopropanoylcarbamate (EMPC) was used as a new complexing agent for the extraction of zinc(II) from the aqueous sample phase to the methyl isobutyl ketone (MIBK) phase as Zn(EMPC)₂ complexes. The Zn(II) can be selectively stripped with 1?mL of 0.5?mol?L^?1 HCl from Mⁿ⁺(EMPC)_n complexes [Ag(I), Al(III), Cd(II), Cr(III), Cu(II), Fe(II), Fe(III), Mn(II), Ni(II), Pb(II) and Pd(II)] which dissolved in MIBK phase. Some experimental parameters, which are important for the whole extraction process, including pH, sample volume, shaking time, amount of the EMPC reagent, amount of MIBK, ionic strength, and type of back-extractant were investigated. The recovery for Zn(II) was greater than 95%. The detection limit of the method was found to be 0.2?µg?L ^{? 1} and the relative standard deviation as 6.4%. The concentrations of Zn(II) in the certified reference materials (LGC6019 river water and NIST-1547 peach leaves) by the presented method were in good agreement with the certified values. The proposed method was succesfully applied to the determination of zinc in some natural waters, rice, hair, soil, and tea samples.     

Investigation of the reaction mechanism and kinetics of production of anhydrous sodium metaborate (NaBO2) by a solid-state reaction

In this study, the solid-state reaction mechanism and kinetics were investigated for production of anhydrous sodium metaborate (NaBO₂), an industrially and technologically important boron compound. To assess the kinetics of solid-state production of NaBO₂, the chemical reaction between borax (Na₂B₄O₇) and sodium hydroxide (NaOH) was investigated by use of the thermal analysis techniques thermogravimetry (TG) and differential thermal analysis (DTA). DTA curves obtained under non-isothermal conditions at different heating rates (5, 10 and 20 °C/min), revealed five endothermic peaks corresponding to five solid-state reactions occurring at 70, 130, 295, 463, and 595 °C. The stages of the solid-state reaction used for production NaBO₂ were also analyzed by XRD, which showed that at 70 and 130 °C, Na₂B₄O₇ and NaOH particles contacted between the grains, and diffusion was initiated at the interface. However, there was not yet any observable formation of NaBO₂. Formation of NaBO₂ was initiated and sustained from 295 to 463 °C, and then completed at 595 °C; the product was anhydrous NaBO₂. Activation energies (E _a) of the solid-state reactions were calculated from the weight loss based on the Arrhenius model; it was found that in the initial stages of the solid-state reaction E _a values were lower than in the last three steps.     

New Reactions of N‐tert‐Butylimines; Formation of N‐Heterocycles by Methyl Radical Elimination on Flash Vacuum Thermolysis of N‐Benzylidene‐ and N‐(2‐Pyridylmethylidene)‐tert‐butylamines

Thermal reactions of N‐benzylidene‐ and N‐(2‐pyridylmethylidene)‐tert‐butylamines ( 5 and 13 ) under FVT conditions have been investigated. Unexpectedly, at 800 °C, compound 5 yields 1,2‐dimethylindole and 3‐methylisoquinoline. In the reaction of 13 at 800 °C, 3‐methylimidazo[1,5‐a]pyridine was obtained as the major product. Mechanisms of these reactions have been proposed on the basis of DFT calculations. Furthermore, UV‐photoelectron spectroscopy combined with FVT has been applied for direct monitoring and characterization of the thermolysis products in situ.     

Analysis of monoclonal antibody by a novel CE‐UV/MALDI‐MS interface

mAbs are highly complex proteins that present a wide range of microheterogeneity that requires multiple analytical methods for full structure assessment and quality control. As a consequence, the characterization of mAbs on different levels is particularly product‐ and time‐consuming. CE‐MS couplings, especially to MALDI, appear really attractive methods for the characterization of biological samples. In this work, we report the last instrumental development and performance of the first totally automated off‐line CE‐UV/MALDI‐MS/MS. This interface is based on the removal of the original UV cell of the CE apparatus, modification of the spotting device geometry, and creation of an integrated delivery matrix system. The performance of the method was evaluated with separation of five intact proteins and a tryptic digest mixture of nine proteins. Intact protein application shows the acquisition of electropherograms with high resolution and high repeatability. In the peptide mapping approach, a total number of 154 unique identified peptides were characterized using MS/MS spectra corresponding to average sequence coverage of 64.1%. Comparison with NanoLC/MALDI‐MS/MS showed complementarity at the peptide level with an increase of 42% when using CE/MALDI‐MS coupling. Finally, this work represents the first analysis of intact mAb charge variants by CZE using an MS detection. Moreover, using a peptide mapping approach CE‐UV/MALDI‐MS/MS fragmentation allowed 100% sequence coverage of the light chain and 92% of the heavy chain, and the separation of four major glycosylated peptides and their structural characterization.     

5‐O‐Caffeoylshikimic acid from Solanum somalense leaves: Advantage of centrifugal partition chromatography over conventional column chromatography

Solanum somalense leaves, used in Djibouti for their medicinal properties, were extracted by MeOH. Because of the high polyphenol and flavonoid contents of the extract, respectively, determined at 80.80 ± 2.13 mg gallic acid equivalent/g dry weight and 24.4 ± 1.01 mg quercetin equivalent/g dry weight, the isolation and purification of the main polyphenols were carried out by silica gel column chromatography and centrifugal partition chromatography. Column chromatography led to 11 enriched fractions requiring further purification, while centrifugal partition chromatography allowed the easy recovery of the main compound of the extract. In a solvent system composed of CHCl₃/MeOH/H₂O (9.5:10:5), 21.8 mg of this compound at 97% purity was obtained leading to a yield of 2.63%. Its structure was established as 5‐O‐caffeoylshikimic acid by mass spectrometry and NMR spectroscopy. This work shows that S. somalense leaves contain very high level of 5‐O‐caffeoylshikimic acid (0.74% dry weight), making it a potential source of production of this secondary metabolite that is not commonly found in nature but could be partly responsible of the medicinal properties of S. somalense leaves.     

Imidazole,pyrimidine and diazepine containing heteroaryl-substituted heterocyclic salts as efficient ligand precursors for Mizoroki–Heck coupling reaction: synthesis,structural characterization and catalytic activities

The nine new heteroaryl-substituted imidazolidinium (1a–c), pyrimidinium (2a–c) and diazepinium (3a–c) salts as N-heterocyclic carbene (NHC) precursors were synthesized in good yields and entirely characterized using elemental analyses and conventional spectroscopic methods. In situ formed complexes from heterocyclic salts (1–3), Pd(OAc)₂ and in the presence of KOBu ^t as a base were tested as catalysts for the Mizoroki–Heck coupling reaction in an aqueous media and very high yields were achieved. 1,3-Di(5-methylthiophen-2-ylmethyl)pyrimidinium hexafluorophosphate salt (2b) was structurally characterized by single-crystal X-ray diffraction. In the 2b compound (C₁₆H₂₁N₂S₂)⁺[PF₆]^?, the terminal thiophene rings are twisted with a dihedral angle of 72.8(3)°. In the pyrimidine ring, the three successive C atoms between the N atoms are disordered over two positions [occupancy ratio 0.753(12):0.247(12)]. In the crystal, neighboring molecules are linked by C–H…F hydrogen bonds, running along the b axis.     

Finite element method for the vibration of cracked beams with varying cross section

Vibration analysis of cracked beams having linearly varying cross-sections both in thickness and width was investigated. A computer program using the finite element method has been written to find the dynamical characteristics (natural frequencies and mode shapes) of the cracked beam. The cracked section in the beam has been modeled by a massless spring whose flexibility depens on the local flexibility induced by the crack. The stiffness of spring has been derived from the linear elastic fracture mechanics theory as the inverse of the compliance matrix calculated using stress intensity factors and strain energy release rate expression. Some examples have been given to explain the proposed method and investigate the effects of the depth and location of cracks on the natural frequencies and mode shapes. The results of current study and those in the literature are compared and good agreements have been found. Consequently it is showed that proposed method is reliable and simple. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Corrosion prevention of mild steel in acidic medium by 2-Pyrrolidin-1-yl-1,3-thiazole-5-carboxylic acid: Theoretical and experimental approach

The inhibition efficiency of 2-Pyrrolidin-1-yl-1,3-thiazole-5-carboxylic acid (PTCA) against mild steel (MS) corrosion was investigated in acidic solution by using quantum chemical calculations based on Density Functional Theory (DFT) method and electrochemical measurements. The electrochemical impedance spectroscopy (EIS), potentiodynamic, potential zero charge (pzc) analysis and electrochemical noise (EN) measurements at various concentrations (from 0.1 to 10 mM) and immersion times were utilized in experimental part. The surface analysis was achieved scanning electron microscope (SEM) and contact angle measurements in the absence and presence of 10 mM PTCA. According to DFT results, PTCA exhibited 3.737 eV band gap and 8.130 Debye dipole moment which were a signal of potentially convenient corrosion inhibitor properties. PTCA has a remarkable corrosion inhibition capability to mild steel, which inhibited both anodic and cathodic corrosion rates, relying on it's physically adsorption on the metal solution interface and protection ability was increased with increasing PTCA concentration. The obtained adsorption equilibrium constant was 11.11 × 10³ M^-1 and calculated standard free energy of adsorption was ?33.03 kJ mol^?1. The determined activation energy values were 55.58 kJ mol^?1 and 96.86 kJ mol^?1 in 0.5 M HCl in the absence and presence of 10 mM PTCA, respectively. PTCA demonstrated a strong inhibition efficiency of 98.3%, after 168 h immersion, according to the EIS results. As a consequently, we recommend that PTCA is a convenient inhibitor in 0.1 M HCl for mild steel protection against corrosion.     

Asymmetrically tetra-substituted phthalocyanine derivatives: synthesis,photophysical and photochemical properties

Transition Metal Chemistry - The syntheses of highly soluble asymmetrically substituted metal free and zinc phthalocyanine derivatives bearing three 4-(4-(5-phenyl-1,3,4-oxadiazol-2-yl)phenoxy) and...