Cationic gold carbonyl complex on a phosphine support

A cationic gold carbonyl complex has been synthesized and characterized using several techniques including X-ray crystallography. [(Mes(3)P)Au(CO)][SbF(6)] (Mes = 2,4,6-Me(3)C(6)H(2)) has a linear, two-coordinate gold atom. This compound displays the CO stretching frequency at 2185 cm(-1). The (13)C NMR signal of the gold-bound (13)CO appears as a doublet centered at δ 182.6 ((2)J(C,P) = 115 Hz). A computational study shows that the Au-CO bond consists of electrostatic attraction, Au ← CO donation, and significant Au → CO π-back-bonding components. Polarization of the CO bond caused by the electrostatic effect of the cationic gold center is mainly responsible for the large blue shift in the CO stretching frequency.     

Investigation of spectroscopic studies and DFT calculations on glucofuranose derivatives of dithiophosphonates

Abstract

2,4-Bis(4-methoxyphenyl)-1,3,2,4-dithiadiphosphetane-2,4-disulfide (Lawesson’s reagent: LR) was reacted with 1,2:5,6-di-O-cyclohexylidene-α-D-glucofuranose and 1,2:5,6-di-O-isopropylidene-α-D-glucofuranose in toluene and gave rise to crude dithiophosphonic acids. The crude dithiophosphonic acids were treated with excess triethylamine and the triethylammonium salts of dithiophosphonic acids (1) and (2) were isolated by crystallization method. Compounds 1 and 2 were characterized by elemental analysis, IR, and NMR (¹H-, ¹³C- and ³¹P-) spectroscopies and mass spectrometry. In addition, NMR spectra, the electronic properties (the electronic chemical potential, electronegativity, chemical hardness and the global electrophilicity index) and NBO analysis of compound 2 have been calculated by using the Gaussian 16?W program. The electronic properties were calculated using Highest Occupied Molecular Orbital (HOMO) and Lowest Unoccupied Molecular Orbital (LUMO) energies by density functional method (DFT/B3LYP) at 6-31G(d,p) level. The HOMO and LUMO energies are ?5.9 and ?0.72?eV, respectively. The HOMO–LUMO energy difference is 5.18?eV and this value shows that compound 2 has a high stability and low reactivity.     

Electroinitiated Polymerization of N-Vinylcarbazole by Direct Electron Transfer

Electroinitiated polymerization of N-vinylcarbazole has been accomplished by constant potential electrolysis. It was found that direct electron transfer from the monomer to the anode initiates the polymerization even at a potential as low as +0.95 V versus Ag^?/ Ag⁺. Dichloromethane was used as the solvent, and the electrolyte was tetrabutylammonium fluoroborate. Conversions as high as 86% were reached even when a microelectrode was used. Effects of electrode area, temperature, and electrode potential on polymerization were studied. Percent conversion was followed by cyclic voltammetry.     

Manganese(III) acetate mediated synthesis of 3-trifluoroacetyl-4,5-dihydrofurans and 3-(dihydrofuran-2(3H)-ylidene)-1,1,1-trifluoroacetones by free radical cyclization. Part 1

2-Trifluoroacetyl-4,5-dihydrofurans were obtained by manganese(III) acetate mediated radical cyclization of trifluoromethyl-1,3-dicarbonyl compounds (1a-c) with conjugated alkenes (2a-h). The reaction of 1,1,1-trifluoropentane-2,4-dione (1a) with propenylbenzene and 1,1-diphenyl-1-butene surprisingly yielded 3-(dihydrofuran-2(3H)-ylidene)-1,1,1-trifluoroacetones besides 3-trifluoroacetyl-4,5-dihydrofurans.     

Atom transfer radical polymerization of 1-phenoxycarbonyl ethyl methacrylate monomer

Atom transfer radical polymerization conditions with copper(I) bromide/2,2^′-bipyridine (Cu/2,2^′-bpy) as the catalyst system were employed for the homopolymerization and random copolymerization of 1-phenoxycarbonyl ethyl methacrylate (PCMA) with methyl methacrylate (MMA). Temperature studies indicated that the polymerizations occurred smoothly in bulk at 110 °C. Poly(PCMA)(polydispersity index=1.27) homopolymer was characterized and then used as macroinitiator for increasing its molecular weight. The homopolymerization of PCMA was also carried out under free radical conditions using 2,2^′-azobisisobutyronitrile as an initiator.The monomer and polymers were characterized by FT-IR and ¹H and ¹³C-NMR techniques. The glass transition temperatures, the solubility parameters and average-molecular weights of the polymers were determined. Thermal stabilities of the polymers were given as compared with each other by using TGA curves. Thermal degradation products of poly(PCMA)s obtained by ATRP and free radical polymerization were compared with each other by using ¹H-NMR technique.     

Characterization and determination of the thermodynamic and kinetic properties of p-CP adsorption onto organophilic bentonite from aqueous solution

The characterization of tetraethylammonium bentonite and the adsorption of p-chlorophenol (p-CP) onto organophilic bentonite (tetraethylammonium bentonite) was studied as a function of the solution concentration and temperature. The observed adsorption rates were found to fit first-order kinetics. The rate constants were calculated for temperatures ranging between 15.0 and 35.0 degrees C at constant concentration. The adsorption energy E and adsorption capacity q(m) for the phenolic compound adsorbing on organophilic bentonite were estimated using the Dubinin-Radushkevic equation. Thermodynamic parameters (Deltag(a), Deltah(a), Deltas(a)) were calculated by a new approximation from the isotherms of p-CP adsorption on organophilic bentonite. These isotherms were modeled according to Freundlich and Dubinin-Radushkevic adsorption isotherms. The amount of adsorption of p-chlorophenol on organophilic bentonite was found to be dependent on the relative energies of adsorbent-adsorbate, adsorbate-solvent, and adsorbate-adsorbate interactions.     

A novel (E,E)-dioxime and its mono-, di- and trinuclear complexes bearing tetradentate octyl sulfanyl phenylamino substituents. Synthesis,characterization and electrochemical properties of its transition metal complexes

A new vic-dioxime, 13,14-bis-(hydroxyimino)-9,12,15,18-diazadithiaoctacosane, has been synthesized from 2-octylsulfanylaminobenzene and (E,E)-dichloroglyoxime. Mononuclear transition metal complexes of Ni^II, Cu^II, Co^II and Fe^II have been prepared and were found to have a metal–ligand ratio of 1:2. The synthesis of di- and trinuclear complexes was achieved with U^IVO₂ and Cu^II depending on the stoichiometry of the reactants. The complexes were characterized by elemental analysis, ¹H-n.m.r., u.v.–vis, i.r., f.a.b.-m.s. and by cyclic voltammetry.     

A Grafting Study on Partially Dehydrochlorinated Poly(vinyl chloride) by Atom Transfer Radical Polymerization

HCl elimination in low ratio was first carried out from poly(vinyl chloride) to increase allylic chlorines. Partially dehydrochlorinated poly(vinyl chloride), having a macroinitiator effect, was grafted with tert‐butyl methacrylate via atom transfer radical polymerization in the presence of CuBr/2,2′‐bipyridine at 64°C in tetrahydrofuran. Original poly(vinyl chloride) was also grafted with tert‐butyl methacrylate under the same conditions to compare with that of partially dehydrochlorinated poly(vinyl chloride). The graft copolymers were characterized by elemental analysis, FTIR, ¹H and ¹³C‐NMR, differential scanning calorimetry, and gel permeation chromatography (GPC). Thermal stabilities of the graft copolymers were investigated by thermogravimetric analysis as compared with those of the macroinitiators.     

Exergoeconomic analysis of a thermochemical copper–chlorine cycle for hydrogen production using specific exergy cost (SPECO) method

The manner is investigated in which exergy-related parameters can be used to minimize the cost of a copper–chlorine (Cu–Cl) thermochemical cycle for hydrogen production. The iterative optimization technique presented requires a minimum of available data and provides effective assistance in optimizing thermal systems, particularly in dealing with complex systems and/or cases where conventional optimization techniques cannot be applied. The principles of thermoeconomics, as embodied in the specific exergy cost (SPECO) method, are used here to determine changes in the design parameters of the cycle that improve the cost effectiveness of the overall system. The methodology provides a reasonable approach for improving the cost effectiveness of the Cu–Cl cycle, despite the fact that it is still in development. It is found that the cost rate of exergy destruction varies between $1 and $15 per kilogram of hydrogen and the exergoeconomic factor between 0.5 and 0.02 as the cost of hydrogen rises from $20 to $140 per GJ of hydrogen energy. The hydrogen cost is inversely related to the exergoeconomic factor, plant capacity and exergy efficiency. The results are expected to assist ongoing efforts to increase the economic viability and to reduce product costs of potential commercial versions of this process. The impact of the results are anticipated to be significant since thermochemical water splitting with a copper–chlorine cycle is a promising process that could be linked with nuclear reactors to produce hydrogen with no greenhouse gases emissions, and thereby help mitigate numerous energy and environment concerns.     

Single crystal X-ray structure and optical properties of anthraquinone-based dyes

This study focuses on the preparation, single crystal X-ray diffraction, characterization, and optical properties of some anthraquinone-based dyes. The anthraquinone-based antimicrobial dye N-{2-[(9,10-dioxo-9,10-dihydroanthracen-1-yl)amino]-2-oxoethyl}-N,N-dimethylbutan-1-aminium chloride monohydrate (III) was obtained from 1-aminoanthraquinone (I) via 2-chloro-N-(9,10-dioxo-9,10-dihydroanthracen-1-yl)acetamide (II) using known preparation and characterization methods. Single crystal X-ray diffraction analysis of III revealed a monoclinic system, space group P2₁/n, Z = 4. Photoluminescence properties of anthraquinone dyes I–III were also investigated. These dyes gave an intense emission (λ_max = 341 nm) upon the irradiation by UV light and showed photoluminescence quantum yields of 73 %, 66 %, and 61 % with long excited-state lifetimes of 6.87 ns, 6.14 ns, and 5.69 ns, respectively. These anthraquinone dyes are of interest as an organic light emitting material for electroluminescent devices.