New functional chiral P-based ligands and application in ruthenium-catalyzed enantioselective transfer hydrogenation of ketones

Metal-catalyzed asymmetric transfer hydrogenation is a powerful and practical method for the reduction of ketones to produce the corresponding secondary alcohols, which are valuable building blocks in the pharmaceutical, perfume, and agrochemical industries. Hence, a series of novel chiral β-amino alcohols were synthesized by chiral amines with regioselective ring opening of (S)-propylene oxide or reaction with (S)-(+)-2-hydroxypropyl p-toluenesulfonate by a straightforward method. The chiral ruthenium catalytic systems generated from [Ru(arene)(μ-Cl)Cl]₂ complexes and chiral phosphinite ligands based on amino alcohol derivatives were employed in asymmetric transfer hydrogenation of ketones to give the corresponding optically active alcohols; (2S)-1-{[(2S)-2-[(diphenylphosphanyl)oxy]propyl][(1R)-1-phenylethyl]amino}propan-2-yldiphenylphosphinitobis[dichol-oro(η⁶-benzene)ruthenium(II)] acts an excellent catalyst in the reduction of α-naphthyl methyl ketone, giving the corresponding alcohol with up to 99% ee. The substituents on the backbone of the ligands were found to have a remarkable effect on both the conversion and enantioselectivity of the catalysts. Furthermore, this transfer hydrogenation is characterized by low reversibility under these conditions.     

Synthesis of molecular sieve AlPO4-12

A member of the novel family of crystalline microporous aluminophosphates, AlPO₄-12, was synthesized by hydrothermal crystallization using different aluminum-containing compounds. Three new crystalline phases were obtained by varying the composition of the reaction mixture. The effect of the synthesis conditions on the hudrothermal process and the kinetics of crystallization are discussed. The apparent activation energies obtained for AlPO₄-12 are 20.9 and 14.6 kcal/mol for nucleation and crystallization, respectively. The adsorption isotherms of one AlPO₄-12 product were measured.     

Microencapsulated oleic–capric acid/hexadecane mixture as phase change material for thermal energy storage

Journal of Thermal Analysis and Calorimetry - Thermal energy storage systems provide efficiency in order to have better utilization of energy sources while protecting the environment. Thermal...     

Tribological behavior of the low-concentration boric acid and ZDDP lubricating oil mixtures

Zinc dithiophosphate (ZDDP)-free environmental friendly lubricating oil research studies have gained importance due to the governmental regulations over the last decade. In this study, low concentration boric acid-base oil and ZDDP-base oil mixtures were investigated with a ball on flat reciprocating tribometer to evaluate their tribological performances. The tribological performances of 1, 3, and 5% additive and base oil mixtures were evaluated at boundary lubrication condition in three main contexts including wear rates, surface tribochemistry, and friction. Results showed that there was no significant difference between boric acid and ZDDP friction coefficients. However, boric acid showed poor wear resistance when compared with ZDDP and it cannot be an alternative additive alone to ZDDPs.     

A new dimeric alkylresorcinol from the stem barks of Swintonia floribunda (Anacardiaceae)

From an EtOAc-soluble fraction of the stem barks of Swintonia floribunda (Anacardiaceae), one new dimeric alkylresorcinol named integracin E (1), together with 4 known compounds (2–5) were isolated. Their chemical structures were elucidated based on the spectroscopic data interpretation. The absolute configuration of 1 was determined by the specific rotation analysis of its acid-catalyzed hydrolysis product. Compound 1 showed potent tyrosinase inhibitory activity with an IC₅₀ value of 48.2?μM.     

Preparation and Characterization of Activated Carbon from Microwave and Conventional Heated Almond Shells Using Phosphoric Acid Activation

Activated carbon production from almond shells using phosphoric acid activation agent was achieved by applying both conventional heating and microwave heating in succession. The morphology and surface properties of activated carbon were studied using thermogravimetric and differential gravimetric analysis, Fourier-transform infrared spectroscopy, scanning electron microscopy, and Brunauer–Emmett–Teller analysis. A surface area of 1128 m²/g was achieved by optimizing the microwave power (500?W), microwave application time (15?minutes), conventional heating time (45?minutes), conventional heating temperature (500?°C), and the phosphoric acid:sample ratio (0.7:1). An adsorption capacity of methylene blue of 148?mg/g and an iodine value of 791?mg/g was obtained for the prepared activated carbon.     

Fast determination of the tin content in cassiterite ores by photon activation method

Photon activation analysis has been success-fully applied to the fast and non-destructive analysis of tin in cassiterite ores based on the 159.7 keV gamma line of^123mSn produced in the¹²⁴Sn/γ, n/^123mSn reaction. In order to improve the accuracy of analytical results, corrections for self-absorption and pile-up effects were performed. Under typical conditions /15 μA electron beam current, 15 MeV bremsstrahlung energy, 5 min irradiation time and 10 min measurement/ the sensitivity of the analysis is 10 ppm. The proposed method can be used for routine analysis of tin in geological samples.     

Mono- and Dinuclear d(10) Metal Complexes of Hexakis(3,5-dimethylpyrazolyl)cyclotriphosphazene. Synthesis, Structures, and Unusual Solution Dynamic Behavior

Synthesis, structures, and unusual solution dynamic processes of d(10) metal complexes of hexakis(3,5-dimethylpyrazolyl)cyclotriphosphazene (L) are reported. Reaction systems with three MX(n):L mole ratios (MX(n) = d(10) metal halide) in CH(2)Cl(2) have resulted in the formation of [ICu(&mgr;,eta(3),eta(3)-L)CuI] (1), [Cl(2)Zn(&mgr;,eta(2),eta(3)-L)ZnCl(2)] (2), [Cl(2)Cd(&mgr;,eta(3),eta(3)-L)CdCl(2)] (3), and [(eta(3)-L)HgCl(2)] (4). These compounds were characterized by single crystal X-ray diffraction studies, and crystallographic data are given in the order of compound: crystal system; space group; unit cell parameters; Z; unique data (I > 2sigma(I)); R(1). 1.0.5CH(2)Cl(2): monoclinic; P2(1)/c; a = 8.268(4) ?; b = 22.365(5) ?; c = 23.325(8) ?, beta = 93.06(1) degrees; 4; 5736; 4.82. 2.CH(3)CN: monoclinic; P2(1)/c; a = 17.021(3) ?; b = 12.161(2) ?; c = 23.608(5) ?; beta = 107.72(1) degrees; 4; 5469; 3.16. 3.CH(2)Cl(2): monoclinic; P2(1)/n; a = 18.585(5) ?; b = 17.585(4) ?; c = 14.404(3) ?; beta = 102.71(2) degrees; 4; 3814; 3.65. The structure of 4 was attempted but resulted in data of low precision. Reaction of L with CuI and ZnCl(2) in an equimolar ratio afforded [ICu(&mgr;,eta(3),eta(3)-L)ZnCl(2)] (5) which crystallizes in monoclinic space group P2(1)/n with a = 22.876(5) ?, b = 21.594(4) ?, c = 9.177(2) ?, beta = 93.54(2) degrees, Z = 4, and R(1) = 7.00 for 3806 (I > 2sigma(I)) data. In all cases, metal halide centers except the Td zinc site in 2 are coordinated by L via a kappa(3)N binding core consisting of two nongeminal pyrazolyl nitrogen atoms and one phosphazene ring nitrogen atom. The eta(2)-N(2) coordination in 2 involves two geminal pyrazolyl nitrogen atoms. Factors which govern the nuclearity of the complex were partially demonstrated. The intermetallic distances in dinuclear metallophosphazenes range from 6.790 to 7.195 ?. The solution behavior of five compounds was studied by variable temperature (31)P{(1)H}, (1)H, and (113)Cd FT NMR spectroscopy. Compounds 1 and 4 are associated with fluxional motions involving A(2)B low-temperature limit spectrum while compounds 2 and 5 show solvent-dependent dynamic processes with ABX and A(2)B low-temperature limit spectral patterns. Compounds 3 constitutes a fluxional system involving three A(2)B species. Accounts of solution NMR spectra were attempted by using PANIC, by assuming the formation of new solution metallophosphazene species and by considering several types of dynamic processes such as a ring-around type hopping motion for the kappa(3)N metal site, a Td conformational change for the geminal pyrazolyl kappa(2)N metal site, and a wigwag motion for the nongeminal pyrazolyl kappa(2)N metal unit.     

Graft polymerization of epoxide and alternating graft copolymerization of epoxide–acid anhydride onto a polystyrene backbone having an aminimide moiety

Graft polymerization of glycidyl phenyl ether (GPE) and alternating graft copolymerization of GPE–succinic anhydride (SA) onto a polymer‐supported aminimide were examined. The polymer‐supported aminimide was synthesized by radical polymerization of 1,1‐dimethyl‐1‐(2‐hydroxy‐3‐(4‐vinylbenzyloxy)propyl)amine 2‐benzoylimide, which was prepared by the reaction of methyl benzoate with equimolar amounts of 1,1‐dimethyl hydrazine and 4‐glycidylmethylstyrene. This aminimide could initiate the polymerization of GPE and alternating copolymerization of GPE with SA to give the corresponding graft copolymers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1041–1048, 1999     

Applicability of in situ detectors for radiological assessment of strontium-90 in rivers and lakes

Journal of Radioanalytical and Nuclear Chemistry - An in situ detector for radiological assessments of strontium-90 (90Sr) in river and lake water is developed, based on a CaF2(Eu) scintillator,...