A Sensitive and Selective RP-LC Method for the Simultaneous Determination of the Antihypertensive Drugs,Enalapril, Lercanidipine,Nitrendipine and Their Validation

A RP-LC method is presented, which is sensitive and selective for the simultaneous determination of enalapril–lercanidipine and enalapril–nitrendipine binary mixtures in their pharmaceutical dosage forms. The analyte peaks were detected using the LC method with the mobile phase ratio of methanol: water (70:30 v/v, pH 3.0) and a 1.0 mL min⁻¹ flow rate. The detection wavelength was selected at 210 nm using photo diode array detector and column temperature was optimized to 30 °C. Linearity was obtained at different concentration ranges for all working pharmaceutically active compounds between 0.5 and 25 μg mL⁻¹. The proposed methods were extensively validated according to USP 27 requirements and ICH guidelines. The methods were applied to the analysis of pharmaceutical dosage forms containing binary mixtures of enalapril–lercanidipine and enalapril–nitrendipine. Moreover, the proposed methods were applied for the degradation studies of the selected compounds. Degradation studies were conducted using stress conditions such as UV light, acidic and alkaline hydrolysis, oxidation and heat in oven, to evaluate the ability of the separation of the response of standard compounds from their degradation products.

     

Synthesis of 2,3‐Dihydro‐4H‐furo[3,2‐c] chromen‐4‐ones and 2,3‐Dihydronaphtho[2,3‐b]furan‐4,9‐diones by the Radical Cyclizations of Hydroxyenones with Electron-Rich Alkenes using Manganese(III) Acetate

We have obtained dihydrofurans 3a–j in the radical cyclization of 4‐hydroxycoumarin 1a and 2‐hydroxy‐1,4‐naphtoquinone 1b with electron rich alkenes 2a–i by manganese(III) acetate. Methods A and B, which have different molar ratios were studied comparatively in these reactions, and we observed that method B (molar ratio 2:1:3) gave the best results. Treatment of 4‐hydroxycoumarin 1a and electron rich alkenes 2a–e gave 2,3‐dihydro‐4H‐furo[3,2‐c]chromen‐4‐ones 3a–e in 36–86% yields by the method B. Under the same conditions, the reactions of 2‐hydroxy‐1,4‐naphtaquinone 1b with conjugated alkenes 2b and 2f–i afforded 2,3‐dihydronaphtho[2,3‐b]furan‐4,9‐diones 3f–j in an excellent yields.     

Synthesis of C 2-Symmetric Chiral Amino Alcohols: Their Usage as Organocatalysts for Enantioselective Opening of Epoxide Ring

A series of β-amino alcohols derivatives were synthesized from (R)-2-amino-1-butanol and (S)-1,2-propanediol, and they have been used as organocatalaysts in the racemic ring opening of epoxide in good yields with high enantiomeric excess (up to 97%).     

Investigation of the reaction mechanism and kinetics of production of anhydrous sodium metaborate (NaBO2) by a solid-state reaction

In this study, the solid-state reaction mechanism and kinetics were investigated for production of anhydrous sodium metaborate (NaBO₂), an industrially and technologically important boron compound. To assess the kinetics of solid-state production of NaBO₂, the chemical reaction between borax (Na₂B₄O₇) and sodium hydroxide (NaOH) was investigated by use of the thermal analysis techniques thermogravimetry (TG) and differential thermal analysis (DTA). DTA curves obtained under non-isothermal conditions at different heating rates (5, 10 and 20 °C/min), revealed five endothermic peaks corresponding to five solid-state reactions occurring at 70, 130, 295, 463, and 595 °C. The stages of the solid-state reaction used for production NaBO₂ were also analyzed by XRD, which showed that at 70 and 130 °C, Na₂B₄O₇ and NaOH particles contacted between the grains, and diffusion was initiated at the interface. However, there was not yet any observable formation of NaBO₂. Formation of NaBO₂ was initiated and sustained from 295 to 463 °C, and then completed at 595 °C; the product was anhydrous NaBO₂. Activation energies (E _a) of the solid-state reactions were calculated from the weight loss based on the Arrhenius model; it was found that in the initial stages of the solid-state reaction E _a values were lower than in the last three steps.     

Design,synthesis, photochromism and electrochemistry of a novel material with pendant photochromic units

In the present work, the synthesis, photochromism and electrochemistry of a novel material 1, 1-(4-[3,4-bis(2,5-dimethyl-3-thienyl)cyclopent-3-en-1-yl]phenyl)-2,5-di-2-thienyl-1H-pyrrole, with pendant dithienylethene (DTE) photochromic units are described. It should be noted that the system 1 can be reversibly and efficiently switched between open (1o) and closed (1c) states by light in both solution and in the solid poly(methyl methacrylate) matrix. It is also noteworthy that the two isomers (1o and 1c) of this novel system 1 can be smoothly polymerized on ITO by electrochemical means. Surprisingly, the DTE unit in 1 does not retain its photochemical switching properties after immobilization onto ITO. The morphology of the polymer film was investigated by AFM analysis. Furthermore, it was found that the polymer exhibited remarkable electrochromic features that can be switched from green in the neutral state to violet state under applied external potentials without disturbing the photochromic units.     

Imidazole,pyrimidine and diazepine containing heteroaryl-substituted heterocyclic salts as efficient ligand precursors for Mizoroki–Heck coupling reaction: synthesis,structural characterization and catalytic activities

The nine new heteroaryl-substituted imidazolidinium (1a–c), pyrimidinium (2a–c) and diazepinium (3a–c) salts as N-heterocyclic carbene (NHC) precursors were synthesized in good yields and entirely characterized using elemental analyses and conventional spectroscopic methods. In situ formed complexes from heterocyclic salts (1–3), Pd(OAc)₂ and in the presence of KOBu ^t as a base were tested as catalysts for the Mizoroki–Heck coupling reaction in an aqueous media and very high yields were achieved. 1,3-Di(5-methylthiophen-2-ylmethyl)pyrimidinium hexafluorophosphate salt (2b) was structurally characterized by single-crystal X-ray diffraction. In the 2b compound (C₁₆H₂₁N₂S₂)⁺[PF₆]^?, the terminal thiophene rings are twisted with a dihedral angle of 72.8(3)°. In the pyrimidine ring, the three successive C atoms between the N atoms are disordered over two positions [occupancy ratio 0.753(12):0.247(12)]. In the crystal, neighboring molecules are linked by C–H…F hydrogen bonds, running along the b axis.     

Finite element method for the vibration of cracked beams with varying cross section

Vibration analysis of cracked beams having linearly varying cross-sections both in thickness and width was investigated. A computer program using the finite element method has been written to find the dynamical characteristics (natural frequencies and mode shapes) of the cracked beam. The cracked section in the beam has been modeled by a massless spring whose flexibility depens on the local flexibility induced by the crack. The stiffness of spring has been derived from the linear elastic fracture mechanics theory as the inverse of the compliance matrix calculated using stress intensity factors and strain energy release rate expression. Some examples have been given to explain the proposed method and investigate the effects of the depth and location of cracks on the natural frequencies and mode shapes. The results of current study and those in the literature are compared and good agreements have been found. Consequently it is showed that proposed method is reliable and simple. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Corrosion prevention of mild steel in acidic medium by 2-Pyrrolidin-1-yl-1,3-thiazole-5-carboxylic acid: Theoretical and experimental approach

The inhibition efficiency of 2-Pyrrolidin-1-yl-1,3-thiazole-5-carboxylic acid (PTCA) against mild steel (MS) corrosion was investigated in acidic solution by using quantum chemical calculations based on Density Functional Theory (DFT) method and electrochemical measurements. The electrochemical impedance spectroscopy (EIS), potentiodynamic, potential zero charge (pzc) analysis and electrochemical noise (EN) measurements at various concentrations (from 0.1 to 10 mM) and immersion times were utilized in experimental part. The surface analysis was achieved scanning electron microscope (SEM) and contact angle measurements in the absence and presence of 10 mM PTCA. According to DFT results, PTCA exhibited 3.737 eV band gap and 8.130 Debye dipole moment which were a signal of potentially convenient corrosion inhibitor properties. PTCA has a remarkable corrosion inhibition capability to mild steel, which inhibited both anodic and cathodic corrosion rates, relying on it's physically adsorption on the metal solution interface and protection ability was increased with increasing PTCA concentration. The obtained adsorption equilibrium constant was 11.11 × 10³ M^-1 and calculated standard free energy of adsorption was ?33.03 kJ mol^?1. The determined activation energy values were 55.58 kJ mol^?1 and 96.86 kJ mol^?1 in 0.5 M HCl in the absence and presence of 10 mM PTCA, respectively. PTCA demonstrated a strong inhibition efficiency of 98.3%, after 168 h immersion, according to the EIS results. As a consequently, we recommend that PTCA is a convenient inhibitor in 0.1 M HCl for mild steel protection against corrosion.     

Asymmetrically tetra-substituted phthalocyanine derivatives: synthesis,photophysical and photochemical properties

Transition Metal Chemistry - The syntheses of highly soluble asymmetrically substituted metal free and zinc phthalocyanine derivatives bearing three 4-(4-(5-phenyl-1,3,4-oxadiazol-2-yl)phenoxy) and...