Synthesis,characterization, electrochemical behaviour and X-ray crystal structures of nickel(II) complexes with a N2O4 donor set macrocyclic Schiff base ligand

Two nickel(II) complexes of [1 + 1] macrocyclic Schiff base ligand (L) have been prepared by cyclocondensation reactions between 1,3-diamino-2-propanol and 2-[3-(2-formylphenoxy)-2-hydroxypropoxy] benzaldehyde, using NiX₂ (X = Br, and I) salts as template agents, and characterized by elemental analyses, IR, molar conductivity and electronic spectra in both solid and solution states. The single-crystal X-ray diffractions of the complexes are also reported that contain nickel(II) ion in a distorted octahedral geometry coordination of N₂O₃X (X = Br, I and NO₃). In all complexes the ligand behaves as a pentadentate ligand. Cyclic voltammetric studies of nickel(II) complexes indicate a quasi-reversible redox wave in the negative potential range.     

Separation and identification of a new saponin from the flowers of Guaiacum officinale L

A triterpenoid saponin, guaianin O (1), oleanolic acid 3-O-{α-L-rhamnopyranosyl-(1 → 2)-[β-D-glucopyranosyl-(1 → 3)]-α-L-arabinopyranoside}-28- O-[β-D-glucopyranosyl]-ester, was isolated from the n-butanol extract of flowers of Guaiacum officinale L. The structural elucidation of 1 was accomplished by extensive studies of both one and two dimensional 1H, 13C-NMR spectra, the FAB mass spectrum, and alkaline and acid hydrolyses.     

Methyl Methacrylate–Ethyleneglycol Dimethacrylate–Acrylic Acid Surface as Stationary Phase for Stir Bar Sorptive Extraction

A novel poly(methyl methacrylate–ethyleneglycol dimethacrylate–acrylic acid) film has been introduced for coating on stir bars to sorptive extraction (SBSE). The effects of different contents of porogen, monomer, cross-linker, modifier and initiator during the solvent or bulk polymerization step on the mechanical property and solvent resistant of prepared sorptive stir bars were investigated. The evaluation of results were caused to obtain the four prepared sorptive stir bars with good mechanical stability and excellent resistance to organic solvents. The extraction efficiency of these prepared sorptive stir bars were investigated by liquid desorption-liquid chromatography-ultraviolet detection (LD-LC-UV) using N-Nitrosodiphenylamine as target analyte. SBSE assays showed the sorptive stir bar that prepared using solution polymerization method had the better recovery for N-Nitrosodiphenylamine in water samples. This sorptive stir bar showed good linearity and acceptable recoveries, as well as advantages such as sensitivity, simplicity, low cost and high feasibility. Based on atomic force microscopy (AFM) results, the average pore size of optimum prepared stir bar using solvent polymerization method was obtained ~9 nm. The thermal gravity (TG) and differential scanning calorimetric (DSC) results showed this polyacrylate film has high thermal stability.     

Application of Sol–Gel Based Poly(ethylene glycol)/Multiwalled Carbon Nanotubes Coated Fiber for SPME of Methyl tert-Butyl Ether in Environmental Water Samples

In this research, the sol–gel technology was applied for the preparation of solid-phase microextraction fibers for extracting of methyl tert-butyl ether (MTBE) from environmental water samples. For this purpose, two different polymers such as poly(ethylene glycol) (PEG) and combination of PEG and multiwall carbon nanotubes (MWCNTs) were prepared using sol–gel technology as coating procedure for the fibers. The pre-concentration process followed by GC–FID determination was used and the results evidenced that pre-concentration factor for PEG/CNTs fiber was approximately five times higher than PEG. Parameters affecting the extraction efficiency such as temperature, extraction time, stirring speed and salt effect for each fiber were investigated and optimized. On the optimal conditions, the linear range for MTBE with PEG and PEG/CNT fibers were 10–3,000 and 1–1,000 ng mL^?1 and the detection limits (S/N = 3) were 1.0 and 0.3 ng mL^?1, respectively. The sol–gel PEG/CNTs fiber has good performance and therefore relatively better figures of merit and experimental results such as thermal stability (up to 320 °C), average of life time (over 150 times) and repeatability (RSD < 4) in comparison to conventional PDMS/Carboxen fiber, which was already reported for determination of MTBE.     

Thermokinetic studies of organotin(IV) carboxylates derived from para-methoxyphenylethanoic acid

Thremogravimetric (TG) studies of a new series of organotin(IV) carboxylates of the general formula R_nSnL_4-n (where R = CH₃, C₂H₅, C₄H₉, C₆H₅, C₆H₁₁ and C₈H₁₇, n = 2, 3 and L = para-methoxyphenylethanoate anion) have been carried out. Horowitz and Metzger method has been used to calculate thermokinetic parameters. It has been found that diorganotin dicarboxylates have larger activation energy than those of corresponding triorganotin carboxylates. Furthermore, the activation energy, Gibb’s free energy, entropy and enthalpy of diorganotin compounds shows the following trend, (CH₃)₂SnL₂ < (C₂H₅)₂SnL₂ < (C₄H₉)₂SnL₂ < (C₈H₁₇)₂SnL₂. This is attributed to steady increase in chain length of the alkyl groups. However, triorganotin compounds do not show such behavior.     

In vitro antitumor and antibacterial assay of organotin(IV) complexes of 2,3-methylenedioxybenzoic acid; X-ray crystal structure of [(C2H5)2Sn(C8H5O4)2]

New organotin(IV) compounds containing the carboxylate ligand 2,3-methylenedioxybenzoic acid (HL) have been synthesized with the general formula R₂SnL₂ (R = Me, Et, n-Bu, Ph and n-Oct) and R₃SnL (R = n-Bu). All compounds have been studied in the solution state by multinuclear NMR (¹H, ¹³C and ¹¹⁹Sn) by using the non-coordinating solvent and also in solid sate by FTIR, mass spectrometry and X-ray crystallography. Spectroscopic data have shown that methylenedioxy moiety does not coordinate with tin atom and the coordination site is actually -COO group, as is proved by X-ray structure determination. The solid state structure of compound (2) has been determined by X-ray crystallography which shows that the complex (2) has distorted octahedral geometry. These complexes have been evaluated in vitro against crown gall tumor and antibacterial activity. Interesting results were noticed during the bio-activity screenings, which proved their in vitro biological potential and possible use as drugs.     

Synthesis and solution properties of a pH‐responsive cyclopolymer of zwitterionic ethyl 3‐(N,N‐diallylammonio)propanephosphonate

The zwitterionic monomer, ethyl 3‐(N,N‐diallylammonio)propanephosphonate, was cyclopolymerized in aqueous solutions using t‐butylhydroperoxide or ammonium persulfate as initiators to afford a polyphosphonobetaine (PPB). The protonation of P(?O)OEtO^– and deprotonation of ? NH⁺ groups in PPB by HCl and NaOH, gave the corresponding cationic polyphosphononic acid (CPP) and anionic polyphosphonate (APP). The presence of two pH‐responsive functionalities in APP has led to establish the equilibria: APP ? PPB ? CPP, the position of which very much dictates the viscosity behavior of its aqueous solution. The PPB demonstrated “antipolyelectrolyte” viscosity behavior; however, in contrast to many polycarbo‐ and polysulfo‐betaines, it was found to be soluble in salt‐free water as well as in salt‐added solutions. Basicity constant (K₁) of the amine group in APP, as determined by potentiometric technique, were found to be “apparent,” and as such followed the modified Henderson‐Hasselbalch equation. The study demonstrated a correlation between the basicity constants and viscosity values. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Exergoeconomic analysis of a thermochemical copper–chlorine cycle for hydrogen production using specific exergy cost (SPECO) method

The manner is investigated in which exergy-related parameters can be used to minimize the cost of a copper–chlorine (Cu–Cl) thermochemical cycle for hydrogen production. The iterative optimization technique presented requires a minimum of available data and provides effective assistance in optimizing thermal systems, particularly in dealing with complex systems and/or cases where conventional optimization techniques cannot be applied. The principles of thermoeconomics, as embodied in the specific exergy cost (SPECO) method, are used here to determine changes in the design parameters of the cycle that improve the cost effectiveness of the overall system. The methodology provides a reasonable approach for improving the cost effectiveness of the Cu–Cl cycle, despite the fact that it is still in development. It is found that the cost rate of exergy destruction varies between $1 and $15 per kilogram of hydrogen and the exergoeconomic factor between 0.5 and 0.02 as the cost of hydrogen rises from $20 to $140 per GJ of hydrogen energy. The hydrogen cost is inversely related to the exergoeconomic factor, plant capacity and exergy efficiency. The results are expected to assist ongoing efforts to increase the economic viability and to reduce product costs of potential commercial versions of this process. The impact of the results are anticipated to be significant since thermochemical water splitting with a copper–chlorine cycle is a promising process that could be linked with nuclear reactors to produce hydrogen with no greenhouse gases emissions, and thereby help mitigate numerous energy and environment concerns.     

Effect of radiation process on antinutrients and HCl extractability of calcium,phosphorus and iron during processing and storage

Whole and dehulled flours of millet cultivars Ashana and Dembi were stored for 30 and 60 days before and after radiation and/or cooking. Phytic acid and polyphenols contents were assayed for all treatments. The results revealed that the storage period was found to have no effect on phytate and polyphenols contents. Moreover, dehulling of the grains reduced more than 50% of phytate and polyphenols of both cultivars. Cooking of the raw whole and dehulled flour significantly (P≤0.05) reduced phytate and polyphenols contents for both cultivars. Radiation process alone had no effect on phytate and polyphenols contents but when followed by cooking significantly (P≤0.05) reduced the level of such antinutrients for the whole and dehulled flour of both cultivars. Dehulling alone significantly (P≤0.05) decreased Ca and P content but slightly decreased Fe content. Radiation alone or in combination with cooking was found to have slight effect on minerals content of the whole and dehulled raw flour for both cultivars. Cooking alone or in combination with radiation of whole or dehulled raw flour significantly (P≤0.05) improved the extractable Ca but had no significant (P≤0.05) effect on extractable P and Fe for both cultivars.     

Optimized ultrasound‐assisted extraction procedure for the analysis of opium alkaloids in papaver plants by cyclodextrin‐modified capillary electrophoresis

This study investigated the use of ultrasound‐assisted extraction to improve the extraction efficiency of morphine, codeine and thebaine from the papaver plants. Extraction conditions such as type of solvent, temperature, duration, frequency and power level of ultrasonic were optimized and the influences of different parameters on resolution of alkaloids in CE were studied. The optimized condition for CE separation includes a sodium phosphate buffer (100 mM, pH 3.0) containing 5 mM α‐CD. The optimized extraction conditions for ultrasound‐assisted extraction was an extraction time of 1 h, an ultrasonic frequency of 60 kHz with water–methanol (80:20) at 40°C as the extraction solvent. The LOD for alkaloids was found to be 0.1 μg/mL at a signal‐to‐noise ratio of 3:1. The RSDs for peak areas were in the range of 1.4–4.4%. The amounts of opium alkaloids (mg/100 g dried sample) in four Iranian papaver plants were found to be in the range of 7.8–8.7 (morphine), 5.5–9.5 (codeine) and 1.4–10.4 (thebaine). It should be emphasized that no cleanup of the filtered extract was required; hence, direct determination after extraction drastically simplifies the analytical process.