Analytical solution of three-dimensional Navier–Stokes equations for the flow near an infinite rotating disk

In this letter, we will consider variational iteration method (VIM) and Padé approximant, for finding analytical solutions of three-dimensional viscous flow near an infinite rotating disk. The solutions is compared with the numerical (fourth-order Runge–Kutta) solution. The results illustrate that VIM–Padé is an appropriate method in solving the systems of nonlinear equations. It is predicted that VIM–Padé can have wide application in engineering problems (especially for boundary-layer and natural convection problems).     

A heterogeneous and reusable nanopolymer-supported palladium catalyst for the copper- and phosphine-free Sonogashira coupling reaction under aerobic conditions in water

We report here the synthesis of a nanopolymer-supported palladium(II) complex catalyst, [PS-tet-Pd(II)] using a simple protocol. The catalyst was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), FT-IR, and energy dispersive X-ray spectroscopy (EDS). PS-tet-Pd(II) proves to be a useful heterogeneous catalyst in the copper- and phosphine-free Sonogashira coupling reaction in water. The catalyst can be recovered from the reaction mixture by simple filtration and reused several times without any significant loss of catalytic activity.     

A highly diastereoselective five-component synthesis of 1-(alkylimino)-5,5-dicyano-3a-aryloctahydro-3-oxacyclobuta[cd]pentalene-1a,2,5a,5b(2H,3aH)-tetracarboxylates

A novel one-pot, five-component synthesis of 1-(alkylimino)-5,5-dicyano-3a-aryloctahydro-3-oxacyclobuta[cd]pentalene-1a,2,5a,5b(2H,3aH)-tetracarboxylates is described. A mixture of phenacyl bromide, malononitrile, isocyanide, and two equivalents of a dialkyl acetylenedicarboxylate undergoes a novel 1:1:1:2 addition reaction at ambient temperature in absolute ethanol to produce diastereoselectively the title compounds in good yields.     

Synthesis,crystal structure,and electrochemical properties of Ni(II) and Cu(II) complexes with two unsymmetrical N2O2 Schiff base ligands

Nickel(II) and copper(II) complexes of two unsymmetrical tetradentate Schiff base ligands [Ni(Me-salabza)] (1), [Cu(Me-salabza)] (2) and [Ni(salabza)] (3), {H₂salabza = N,N′-bis[(salicylidene)-2-aminobenzylamine] and H₂Me-salabza = N,N′-bis[(methylsalicylidene)-2-aminobenzylamine]}, have been synthesized and characterized by elemental analysis and spectroscopic methods. The crystal structures of 2 and 3 complexes have been determined by single crystal X-ray diffraction. Both copper(II) and nickel(II) ions adopt a distorted square planar geometry in [Cu(Me-salabza)] and [Ni(salabza)] complexes. The cyclic voltammetric studies of these complexes in dichloromethane indicate the electronic effects of the methyl groups on redox potential.     

Coordination polymer chains built from CuII and adipate ions linked by hydrogen bonds to form a three‐dimensional framework structure

In the title compound, catena‐poly[bis[(2,2′‐bipyridine‐κ²N,N′)(1,1,3,3‐tetracyano‐2‐ethoxypropenido‐κN)copper(II)]‐μ₄‐hexanedioato‐κ⁶O¹,O^1′:O¹:O⁶,O^6′:O⁶], [Cu₂(C₉H₅N₄O)₂(C₆H₈O₄)(C₁₀H₈N₂)₂]_n, the adipate (hexanedioate) dianion lies across a centre of inversion in the space group P. The Cu^II centre adopts a distorted form of axially elongated (4+2) coordination, and the Cu^II and adipate components form a one‐dimensional coordination polymer from which the 2,2′‐bipyridine and 1,1,3,3‐tetracyano‐2‐ethoxypropenide components are pendent, and where each adipate dianion is bonded to four different Cu^II centres. The coordination polymer chains are linked into a three‐dimensional framework structure by a combination of C—H...N and C—H...O hydrogen bonds, augmented by a π–π stacking interaction.     

Efficient and selective oxidation of hydrocarbons with tert-butyl hydroperoxide catalyzed by oxidovanadium(IV) unsymmetrical Schiff base complex supported on γ-Fe2O3 magnetic nanoparticles

The catalytic activity of an oxidovanadium(IV) unsymmetrical Schiff base complex supported on γ-Fe₂O₃ magnetic nanoparticles, γ-Fe₂O₃@[VO(salenac-OH)] in which salenac-OH?=?[9-(2′,4′-dihydroxyphenyl)-5,8-diaza-4-methylnona-2,4,8-trienato](-2), was explored in the oxidation of hydrocarbons with tert-butyl hydroperoxide (TBHP, 70% aqueous solution) as oxidant. High catalytic activity and selectivity were demonstrated by this magnetic nanocatalyst in alkane hydroxylation and alkene epoxidation, and the corresponding products were obtained with good to excellent yields in acetonitrile at 50 °C. Reasonable catalytic activity was presented by this supported catalyst in the epoxidation of linear alkenes under optimal reaction conditions. In addition, alkylbenzene derivatives and cycloalkanes can be oxidized to their corresponding alcohols and ketones with good yields in this catalytic system. It is possible to magnetically separate the γ-Fe₂O₃@[VO(salenac-OH)] catalyst and reuse it four times without losing the activity significantly. Moreover, the catalyst structure and morphology do not change after recovery, as indicated by comparing scanning electron microscopy (SEM) image, Fourier transform infrared (FT-IR) and diffuse reflectance spectrum (DRS) of the recovered catalyst with those of the fresh catalyst.

     

A Novel Naphthalene-Immobilized Nanoporous SBA-15 as a Highly Selective Optical Sensor for Detection of Fe<Superscript>3+</Superscript> in Water

A novel organic-inorganic hybrid optical sensor (SBA-NCO) was designed and synthesized through immobilization of isocyanatopropyl-triethoxysilane and 1-amino-naphthalene onto the surface of SBA-15 by post-grafting method. The characterization of materials using XRD, TEM, N₂ adsorption-desorption, and FT-IR techniques confirmed the successful attachment of organic moieties and preserving original structure of SBA-15 after modification step. Fluorescence experiments demonstrated that SBA-NCO was a highly selective optical sensor for the detection of Fe³⁺ directly in water over a wide range of metal cations including Na⁺, Mg²⁺, Al³⁺, K⁺, Ca²⁺, Cr³⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, and Pb²⁺ in a wide pH values.     

Electropolymerized coatings of poly(o‐anisidine) and poly(o‐anisidine)‐TiO2 nanocomposite on aluminum alloy 3004 by using the galvanostatic method and their corrosion protection performance

Poly(o‐anisidine) (POA) and poly(o‐anisidine)‐TiO₂ (POA‐TiO₂) nanocomposite coatings on aluminum alloy 3004 (AA3004) have been investigated by using the galvanostatic method. The electrosynthesized coatings were characterized by FT ‐ IR spectroscopy, XRD, SEM ‐ EDX and SEM. The corrosion protection performance of POA and POA‐TiO₂ nanocomposite coatings was investigated in the 3.5% NaCl solution by using potentiodynamic polarization technique and electrochemical impedance spectroscopy. The results show that the corrosion rate of the nanocomposite coatings is about 900 times lower than the bare AA3004 under optimal conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Preparation of ethylene/α-olefins copolymers using (2-RInd)2ZrCl2/MCM-41 (R:Ph,H) catalyst,microstructural study

(2-RInd)₂ZrCl₂ (R:Ph,H) catalyst was supported on MCM-41 and ethylene copolymerization behavior as well as microstructure of copolymers were studied. A steady rate–time profile behavior was observed for homo and copolymerization of ethylene using supported catalysts. It was noticed that increasing the comonomer content can result in lower physical properties. The obtained results indicated that (2-PhInd)₂ZrCl₂/MCM-41 had higher ability of comonomer incorporation than the non-substituted supported catalysts. The CCC, CCE, and ECC (C: comonomer, E: ethylene) triad sequence distribution in backbone of copolymers were negligible, that means no evidence could be detected for comonomer blocks. The polymer characterization revealed that utilizing 1-octene instead of 1-hexene as the comonomer leads to more heterogeneous distribution of chemical composition. The heterogeneity of the chemical composition distribution and the physical properties were influenced by the type of comonomer and catalyst. (2-PhInd)₂ZrCl₂/MCM-41 produced copolymers containing narrower distribution of lamellae (0.3–1 nm) than the copolymer produce using Ind₂ZrCl₂/MCM-41 (0.3–1.6 nm).