New 5-bromo-2-hydroxybenzaldehyde S-ethylisothiosemicarbazone and its mixed-ligand Cu(II) complex with imidazole: synthesis, characterization and DFT calculation

A new Schiff base ligand of 5-bromo-2-hydroxybenzaldehyde S-ethyl-isothiosemicarbazone (H₂L) was synthesized and its mixed-ligand Cu(II) complex was also prepared by reaction of Cu(NO₃)₂·3H₂O with H₂L and imidazole. Their structures were fully characterized by elemental analysis, FT-IR, molar conductivity and UV-Vis methods. The analytical data suggest that the metal, H₂L and imidazole ratios in the Schiff base complex are 1:1:1. Single crystal diffraction was also used to better understand the molecular structure of the Cu(II) complex. The results of physico-chemical analyses of the Schiff base complex reveal the coordination geometry around the central atom is square planar. The H₂L ligand (NNO donor) is coordinated to the metal center as a tridentate bionegatively agent. Another position of the square planar geometry is occupied by the imidazole ligand. Furthermore, computational studies of the new complex were performed by carrying out DFT calculations. Geometry optimization and natural band analysis of the complex is discussed in further detail.      

Optimization of synthesis procedure and structure characterization of manganese tungstate nanoplates

A simple and fast chemical method was used for synthesis of manganese tungstate nanoplates in flower-like clusters; while Taguchi robust design was employed as statistical method for optimization of the experimental parameters for the procedure. Ultrafine manganese tungstate plates in flower-like clusters were synthesized via a direct precipitation method involving addition of manganese ion solution to the aqueous tungstate reagent. Effects of various reaction conditions such as manganese and tungstate concentrations, flow rate of reagent addition and reactor temperature on the thickness of the synthesized manganese tungstate plates were investigated experimentally. Analysis of variance (ANOVA) showed that manganese tungstate nanoplates could be effectively synthesized by tuning significant parameters of precipitation procedure. Meanwhile, optimum conditions for synthesis of MnWO4 nanoplates via this simple, fast, and cost effective method were proposed. The structure and composition of the prepared nanoplates under optimum conditions were characterized by EDX, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), FT-IR spectroscopy, and photoluminescence techniques.      

SMFs-supported Pd nanocatalysts in selective acetylene hydrogenation: Pore structure-dependent deactivation mechanism

In the present study, CNFs, ZnO and Al₂O₃ were deposited on the SMFs panels to investigate the deactivation mechanism of Pd-based catalysts in selective acetylene hydrogenation reaction. The examined supports were characterized by SEM, NH₃-TPD and N₂ adsorption-desorption isotherms to indicate their intrinsic characteristics. Furthermore, in order to understand the mechanism of deactivation, the resulted green oil was characterized using FTIR and SIM DIS. FTIR results confirmed the presence of more unsaturated constituents and then, more branched hydrocarbons formed upon the reaction over alumina-supported catalyst in comparison with the ones supported on CNFs and ZnO, which in turn, could block the pores mouths. Besides the limited hydrogen transfer, N₂ adsorption-desorption isotherms results supported that the lowest pore diameters of Al₂O₃/SMFs close to the surface led to fast deactivation, compared with the other catalysts, especially at higher temperatures.     

One-step synthesis of agarose coated magnetic nanoparticles and their application in the solid phase extraction of Pd(II) using a new magnetic field agitation device

A magnetic solid phase extraction method based on agarose coated magnetic nanoparticles)ACMNPs(coupled to a new magnetic field agitation (MFA) device was developed and investigated for the separation, preconcentration and determination of Pd(II) in aqueous solutions. For the first time, the formation of the nanoparticles and their encapsulation in agarose micro-flakes was conducted in a single step. For this purpose, preparation of the magnetic iron oxide nanoparticles was performed in an alkaline agarose solution. The sizes of Fe₃O₄ nanoparticles and agarose micro-flakes were 10–14 nm and 90–130 μm, respectively. The nanomagnetic agarose particles were functionalized by iminodiacetic acid and subjected to magnetic field agitation in the MFA device. The influence of different analytical parameters such as pH, ionic strength, type and volume of desorption solvent and amount of the adsorbent on the preconcentration of Pd(II) were investigated. Eight replicated analysis at the optimized conditions, resulted in a recovery of 94.1% with an RSD of 5.2% for Pd(II). The detection limit of the method (3σ) was 47 ng L⁻¹ for the analyte. The method was successfully applied to the determination of Pd(II) in natural water samples.     

Synthesize,Characterization and Application of Phosphine‐free Polymer Supported Palladium Nanoparticles as Effective Catalyst in Suzuki‐Miyaura Cross‐coupling Reactions

Heterogeneous catalysts were developed by supporting palladium nanoparticles on modified cross‐linked polyacrylamide and successfully applied in Suzuki‐Miyaura cross‐coupling reactions. These catalysts are stable to air and moisture, and no sign of metal leaching was detected during the reactions as judged by elemental analysis of palladium by ICP‐OES technique and hot filtration test, which demonstrates the heterogeneous character of the catalysts. High yields of desired products were resulted by using these phosphine‐free catalysts at temperatures below 80 °C without aid of any additional ligands. The heat stability of the catalysts at the operating temperature was confirmed by thermogravimetric analysis (TGA). These catalysts are easy to use and cost effective. They can be recovered from reaction mixture by a simple filtration and reused in more successive reactions without significant loss in activity. The catalyst activity was restored by an ultrasonication program after deactivation in 10 cycles.     

Silica‐Bound 3‐{2‐[Poly(ethylene Glycol)]ethyl}‐Substituted 1‐Methyl‐1H‐imidazol‐3‐ium Bromide: A Recoverable Phase‐Transfer Catalyst for Smooth and Regioselective Conversion of Oxiranes to β‐Hydroxynitriles in Water

A series of β‐hydroxynitriles were efficiently synthesized from the regioselective ring opening of oxiranes by cyanide anion in the presence of silica‐bound 3‐{2‐[poly(ethylene glycol)]ethyl}‐substituted 1‐methyl‐1H‐imidazol‐3‐ium bromide (SiO₂? PEG? ImBr) as a novel recoverable phase‐transfer catalyst in H₂O (Scheme 1 and Table 2). The workup procedure was straightforward, and the catalyst could be reused over four times with almost no loss of catalytic activity and selectivity.     

Highly Efficient Solvent-Free Synthesis of Dihydropyrimidinones Catalyzed by Zinc Oxide

A simple, efficient and practical procedure for the Biginelli reaction using zinc oxid (ZnO) as a novel and reusable catalyst is described under solvent-free conditions in high yields. The use of this agent is characterized by remarkable reactivity, moderate costs, low toxicity and simple work up procedures.     

Three-Component,One-Pot Synthesis of Benzo[b][1,4]oxazines in Ionic Liquid 1-Butyl-3-methylimidazolium Bromide

Benzo[b][1,4]oxazines have been synthesized in good to excellent yields in the presence of the ionic liquid 1-butyl-3-methylimidazolium bromide [bmim]Br under relatively mild conditions without any added catalyst, The method offers the advantages of good yields and short reaction times, and the ionic liquid can be easily separated from the product and reused.     

Synthesis,Characterization, and Herbicidal Activities of New 1,3,4‐Oxadiazoles, 1,3,4‐Thiadiazoles,and 1,2,4‐Triazoles Derivatives Bearing (R)‐5‐Chloro‐3‐fluoro‐2‐phenoxypyridine

Synthesis of some novel 1,2,4‐triazoles, 1,3,4‐oxadiazoles and 1,3,4‐thiadiazoles bearing a (R) 5‐(1‐(4‐(5‐chloro‐3‐fluoropyridin‐2‐yloxy)phenoxy)ethyl) unit, as a moiety of commercial herbicide, using their thiosemicarbazides in an alkaline, iodine and acidic media is reported, respectively. The structure of the synthesized compounds was characterized by IR, ¹H, ¹³C NMR spectroscopic data, and elemental analyses. The herbicidal activities of synthesized compounds were evaluated against Echinochloa cruss‐galli, Avena fatua, and Sorgum halepense weeds. Compounds 7 and 12a showed potential herbicidal activity against gramineous weeds. Our results may provide some guidance for synthesis development of some novel oxa or thiadiazole and triazole‐based herbicidal lead structures.     

Convenient Synthesis of 2-Aminothiophene Derivatives by Acceleration of Gewald Reaction Under Ultrasonic Aqueous Conditions

Under ultrasound irradiation and in the presence of H₂O/Et₂NH, ethyl cyanoacetate or malononitrile can combine with α-methylene carbonyl compounds and elemental sulfur to efficiently yield 2-aminothiophene derivatives within a few minutes. Products are easily obtained by simple filtration because of their spontaneous precipitation in the reaction mixtures.