Experimental design for estimation of the distribution of the convective heat transfer coefficient for a bubbly impinging jet

Journal of Thermal Analysis and Calorimetry - In this study, a two-dimensional inverse algorithm is developed to determine the heat transfer coefficient distribution of a two-phase air–water...     

Hybrid thermal management of lithium-ion batteries using nanofluid,metal foam,and phase change material: an integrated numerical–experimental approach

Safety issues of Li-ion batteries imposed by unfavorable thermal behavior accentuate the need for efficient thermal management systems to prevent the runaway conditions. To that end, a hybrid thermal management system is designed and further investigated numerically and experimentally in the present study. The passive cooling system is fabricated by saturating copper foam with paraffin as the phase change material (PCM) and integrated with an active cooling system with alumina nanofluid as the coolant fluid. Results for various Reynolds numbers and different heating powers indicate that the hybrid nanofluid cooling system can successfully fulfill safe operation of the battery during stressful operating conditions. The maximum time in which all PCM field is changed to the liquid phase is defined as the onset of the stressful conditions. Therefore, the start time of stressful conditions at 41 W and Re 420 is increased from 3700 s with nanofluid composed of 1% volume fraction nanoparticles (VF-1%) to 4600 s with nanofluid VF-2% during high current discharge rates. Nanofluid cooling extends the operating time of the battery in comparison with the water-based cooling system with 200-s (nanofluid with volume fraction of 1%) and 900-s (nanofluid with volume fraction of 2%) increases in operating time at Reynolds of 420. Using nanofluid, instead of water, postpones the onset of paraffin phase transition effectively and prolongs its melting time which consequently leads to a decrease in the rate of temperature rise.

     

Robust fixed-time attitude stabilization control of flexible spacecraft with actuator uncertainty

Nonlinear Dynamics - A robust fixed-time control framework is presented to stabilize flexible spacecraft’s attitude system with external disturbance, uncertain parameters of inertia, and...     

Gas storage of simple molecules in boron oxide nanocapsules

The capability of the B₂₀O₃₀ nanocapsule to store H₂, N₂, CO, CO₂, NH₃, CH₄, and Cl₂ molecules on the outer surface and inside of the cage was investigated using Monte Carlo simulations, long‐range and dispersion corrected density functional theory, and Møller–Plesset second‐order perturbation theory. Also, Monte Carlo simulations were employed to investigate the adsorption behavior of larger number of guest molecules inserted into and onto the larger B₈₀O₁₂₀ and B₂₀O₃₀@B₈₀O₁₂₀ cages. Absolute localized molecular orbitals energy decomposition analysis was used to describe the nature of intermolecular interactions in these endohedral and exohedral complexes. It is found that the hydrogen and ammonia gases are diffused to the inside of spherical B₂₀O₃₀ capsule, while other guest molecules prefer to interact with the outer surface of spherical and pyramidal capsules. For B₈₀O₁₂₀, up to 26 H₂ and 11–14 N₂, CO, CO₂, NH₃, and CH₄ molecules are stored inside the capsule. The residual molecules are adsorbed on the outer surface of nanocapsule. © 2013 Wiley Periodicals, Inc.     

Synthesis and characterization of new fluorinated photoactive polyamides based on xanthene pendant: Evaluation of antibacterial and heavy metal ions removal behavior

A series of novel organosoluble polyamides (PAs) bearing different functional groups such as flexible ether, substituted imidazole, and xanthene rings and electron-withdrawing CF₃ groups were synthesized from diamines and various dicarboxylic acids. The structures of diamines and PAs were fully characterized by elemental analysis, Fourier transform infrared spectroscopy, and proton nuclear magnetic resonance spectroscopy. The PAs showed good solubility in aprotic and polar organic solvents, with high thermal stability exhibiting the glass transition temperatures (T_gs) and 10% weight loss temperatures (T₁₀%) in the range of 184–277°C and 410–480°C in N₂ atmosphere, respectively. These polymers showed fluorescence emission upon irradiation with UV light. Diamine compounds and two of synthesized polymers were also screened for antibacterial activity against gram-positive and gram-negative bacteria, and the obtained results for all four combinations showed good inhibition. Extraction capability for heavy metal ions such as Cr³⁺, Pb²⁺, Hg²⁺, Cd²⁺, and Co²⁺ from aqueous solutions was also tested at 25°C and pH 7–8.     

Electrocatalytic activity of porous nanostructured Fe/Pt-Fe electrode for methanol electrooxidation in alkaline media

An electrochemical approach to fabricate a nanostructured Fe/Pt-Fe catalyst through electrodepo-sition followed by galvanic replacement is presented. An Fe/Pt-Fe nanostructured electrode was prepared by deposition of Fe-Zn onto a Fe electrode surface, followed by replacement of the Zn by Pt at open-circuit potential in a Pt-containing alkaline solution. Scanning electron microscopy and energy-dispersive X-ray techniques reveal that the Fe/Pt-Fe electrode is porous and contains Pt. The electrocatalytic activity of the Fe/Pt-Fe electrode for oxidation of methanol was examined by cyclic voltammetry and chronoamperometry. The electrooxidation current on the Fe/Pt-Fe catalyst is much higher than that on flat Pt and smooth Fe catalysts. The onset potential and peak potential on the Fe/Pt-Fe catalyst are more negative than those on flat Pt and smooth Fe electrodes for methanol electrooxidation. All results show that this nanostructured Fe/Pt-Fe electrode is very attractive for integrated fuel cell applications in alkaline media.     

Selective detection of sulfur-containing compounds by gas chromatography/chemical reaction interface mass spectrometry

Addition of a reactant gas to a low pressure microwave-induced plasma creates a reaction interface in which complex molecules are converted into small polyatomic neutral species. For a given reactant gas the array of these small molecules reflect s the elemental composition of the original analyte. In this study HCI has been found highly effective as a reactant gas for selective detection of sulfur-eontaining compounds using capillary gas chromatography/ chernical reaction interface mass spectrometry. Detection limits as low as 30 pg of a sulfur-containing compound and a dynamic range of two orders of magnitude were achieved.     

Study on the Interaction of the CpG Alternating DNA with CdTe Quantum Dots

A novel sensitive method for detection of DNA methylation was developed with thioglycollic acid (TGA)-capped CdTe quantum dots (QDs) as fluorescence probes. Recognition of methylated DNA sites would be useful strategy due to the important roles of methylation in disease occurrence and developmental processes. DNA methylation occurs most often at cytosine-guanine sites (CpG dinucleotides) of gene promoters. The QDs significantly interacted with hybridized unmethylated and methylated DNA. The interaction of CpG rich methylated and unmethylated DNA hybrid with quantum dots as an optical probe has been investigated by fluorescence spectroscopy and electrophoresis assay. The fluorescence intensity of QDs was highly dependent to unmethylated and methylated DNA. Specific site of CpG islands of Adenomatous polyposis coli (APC), a well-studied tumor suppressor gene, was used as the detection target. Under optimum conditions, upon the addition of unmethylated dsDNA, the fluorescence intensity increased in linear range from 1.0?×?10^??10 to 1.0?×?10^??6M with detection limit of 6.2?×?10^??11 M and on the other hand, the intensity of QDs showed no changes with addition of methylated dsDNA. We also demonstrated that the unmethylated and methylated DNA and QDs complexes showed different mobility in electrophoresis assay. This easy and reliable method could distinguish between methylated and unmethylated DNA sequences.     

Pyrophosphate Selective Recognition in Aqueous Solution Based on Fluorescence Enhancement of a New Aluminium Complex

A novel and simple fluorescence enhancement method for selective pyrophosphate(PPi) sensing was proposed based on a 1:1 metal complex formation between bis(8-hydroxy quinoline-5-solphonat) chloride aluminum(III) (Al(QS)₂Cl), (L) and PPi in aqueous solution. The linear response range covers a concentration range of 1.6 × 10⁻⁷ to 1.0 × 10⁻⁵ mol/L of PPi and the detection limit of 2.3 × 10⁻⁸ mol/L. The association constant of L-PPi complex was calculated 2.6 × 10⁵ L/mol. L was found to show selectively and sensitively fluorescence enhancement toward PPi over than I₃^-, NO₃^-, CN⁻, CO₃²⁻, Br⁻, Cl⁻, F⁻, H₂PO4⁻ and SO₄²⁻, which was attributed to higher stability of inorganic complex between pyrophosphate and L.     

An experimental investigation of creaming phenomenon using a novel optical method: A case study of mineral oil-in-water emulsion

The present study elucidates the creaming phenomenon of mineral oil-in-water macroemulsion using a new noninvasive method based on turbidimetry. Additionally, microscopic observation of the phenomenon is carried out to derive an in-depth understanding of the mechanisms. Accumulation of the particles in the emulsions under the formed cream is monitored during a relatively prolonged period of time. Backflow of continuous and dispersed phases in temporary channels is observed at the proximity of the cream. In addition to the backflow, a high traffic density of the dispersed particles and deflocculation of the cream are the main reasons for the accumulation of the dispersed phase particles and a temporary stability against creaming. The deflocculation hinders cream growth and increases the stratification of the cream. A low concentration zone of the dispersed phase with the width of ～100?µm is observed under the cream.