Rate of spontaneous deactivation of styryl and α-methylstyryl carbanions

The deactivation of α-methylstyryl and styryl carbanions followed by spectral change and titration was studied kinetically. First-order rate constants were obtained for the deactivation of oligo-α-methylstyryl lithium, disodium, and dipotassium in tetrahydrofuran and of polystyryl potassium in varying degrees of polymerization in benzene that contained a small amount of tetrahydrofuran and n-hexane. It was observed that the addition of cryptate [222] exerts a significant effect on the system of oligo-α-methylstyryl disodium in tetrahydrofuran. The effect of dilution, degree of polymerization of the polymer, and counterions on the rate of deactivation of carbanions was discussed.     

A glucose electrode based on carbon paste chemically modified with a ferrocene-containing siloxane polymer and glucose oxidase,coated with a poly(ester-sulfonic acid) cation-exchanger

A carbon-paste chemically modified with glucose oxidase and a ferrocene-containing siloxane polymer was further modified by coating the electrode surface with a poly(ester-sulfonic acid) cation-exchanger, Eastman AQ-29D. The polymer is obtained as a homogeneous aqueous dispersion at pH 5–6; when dried, the polymer coating is not water-soluble. The coating was shown not to be detrimental to the enzyme activity but to prevent electrochemically active anionic interferents such as ascorbate and urate from reaching the electrode surface. The polymer coating also prevented glucose oxidase from leaking out of the carbon paste into the contacting solution and protected the electrode surface from fouling agents present in urine and bovine serum albumin. Uncoated electrodes lost some 10-2-15% of their original response to glucose after storage in buffer for three weeks whereas the response of the coated electrodes remained constant. Calibration curves for glucose were strictly linear up to about 5 mM for uncoated and up to 20 mM for coated electrodes. The response current to glucose was not decreased after coating.     

A new method for the synthesis of novel 1,2,4-triazolo[3,4-f][1,2,4]triazines

Novel compounds 8-(quinoxalin-2-yl)-1,2,4-triazolo[3,4-f][1,2,4]triazines 3a,b were obtained by a new annulation method in the 1,2,4-triazine synthesis.     

Rapid fermentation of beer using an immobilized yeast multistage bioreactor

The characteristics of yeast sulfite metabolism in a multistage bioreactor system for beer fermentation were investigated. No sulfite was produced in the continuous stirred-tank reactor (CSTR). However, large amounts were produced in the packed-bed reactor (PBR). Production of sulfite in the PBR seems to be inevitable when it is operated continuously. In order to control the sulfite level in the young beer, the yeast needs to be reactivated into the growth phase. One possible strategy to achieve this is to aerate and periodically remove yeast clogged in the reactor once every 6–7 months before the sulfite level exceeds a given concentration (e.g., 20 mg/L). It was confirmed that sulfite production is closely related to the growth condition of the yeast and is therefore important to consider in the control strategy for sulfite when using the immobilized yeast reactor for beer production.     

Molecular-shape recognition of polycyclic aromatic hydrocarbons in reversed phase liquid chromatography

Summary The molecular-shape recognition of polycyclic aromatic hydrocarbons has been studied on various stationary phases in reversed-phase high-performance liquid chromatography. The examined stationary phases were phenyl-, diphenyl-, triphenyl- and benzyl-bonded silicas. The results of regression analysis inidcated that triphenylsilica is the best packing material to recognize the difference in the molecular-shape of structural isomers. This fact was confirmed by the separation of 4-ring isomers.     

Preparation and gas separation properties of zeolite T membrane

Zeolite T membranes were synthesized on tubular porous mullite tubes by hydrothermal synthesis. The membranes selectively permeated carbon dioxide from CO2/CH4 and CO2/N2 mixtures with high separation performances, which were due to combined effects of molecular sieving and competitive adsorption.     

Determination of traces of natural brassinosteroids as dansylaminophenylboronates by liquid chromatography with fluorimetric detection

A microanalytical method for the determination of traces of natural brassinosteroids as their dansylaminophenylboronates by liquid chromatography with fluorimetric detection is described. The boronates are easily prepared by the reaction of brassinosteroids with dansylaminophenylboronic acid (DABA), which was newly synthesized as a precolumn fluorogenic reagent for brassinosteroids. The potential of the method is demonstrated by the separation of a standard brassinosteroid mixture and the analysis of a biologically active fraction sample obtained from an extract of Zea mays L. pollen. The detection limit of the DABA derivative was found to be 25 pg for brassinolide, which is superior to that of the phenanthreneboronate derivative.     

Preparation and certification of JAC river water reference material for trace element analysis

 The Japan Society for Analytical Chemistry has recently issued a river water-certified reference material (CRM) for use in the ultratrace analysis of elements in fresh water. The river water CRM consists of a set of two (natural and spiked) 500-ml samples. The natural water is certified for Pb, Cr, As, Cu, Fe, Mn, Zn, B and Al at their sub-μg/l levels, while the spiked water is intended for use in the regulatory analysis of tap water and fresh water. Key words River water · Trace element analysis · Regulatory analysis · Reference materials     

Determination of optimal formulation for extrusion granulation by compression test of wet kneaded mass

The purpose of this study is to propose the application of a compression test to the determination of an optimal formulation for extrusion granulation. The electric current during extrusion was measured and the characteristics of the wet kneaded mass in the compression test were analyzed under various operating conditions, with different types of extruders and several formulations of kneaded mass. It was found that addition of a binder (HPC-L) to pharmaceutical powders lowered the load of a high-compressing type extruder, since the binder reduced the friction among the wet mass during extrusion. Also, the support stress was found to be proportional to the compression pressure without a binder, although an inflection point appeared on the support stress curve when a binder was present. This inflection point suggested large water retention of the wet kneaded mass, at which the medium of pressure was changed from a discontinuous solid powder to a continuous liquid, and large water retention contributed to the low friction of the wet mass. The friction of the wet kneaded mass and the aptitude of the formulation for extrusion were understood by using the compression test. The compression test is a very useful procedure at the first stage of a formulation study.