Probes for narcotic receptor-mediated phenomena. 33. Construction of a strained trans-5,6-ring system by displacement of a nitro-activated aromatic fluorine. synthesis of the penultimate oxide-bridged phenylmorphans

The synthesis of the ortho- and para-e isomers in the oxide-bridged 5-phenylmorphan series of rigid tetracyclic compounds was accomplished via rac-5-(2-fluoro-5-nitrophenyl)-2-methyl-2-azabicyclo[3.3.1]nonan-9beta-ol ((+/-)-10), an intermediate containing an aromatic nitro-activated fluorine atom. The fluorine atom was used as the leaving group for the formation of the strained tetracyclic trans-fused 5,6-ring system in rac-(1alpha,4aalpha,9aalpha)-1,3,4,9a-tetrahydro-2-methyl-6-nitro-2H-1,4a-propanobenzofuro[2,3-c]pyridine ((+/-)-11), although preference for cis ring fusion during the formation of tricyclic tetra- and hexahydrodibenzofurans has been well-documented. Single-crystal X-ray crystallographic study of the desired para-e isomer ((+/-)-2), as well as of two intermediates in its synthesis, provided assurance of the correct structures. The e-isomers are among the last of the 12 oxide-bridged 5-phenylmorphans to be synthesized. We envisioned the syntheses of these rigid, tetracyclic compounds in order to determine the three-dimensional pattern of a ligand that would enable interaction with opioid receptors as agonists or antagonists.     

Characterization and optimization of heroin hapten-BSA conjugates: method development for the synthesis of reproducible hapten-based vaccines

A potential new treatment for drug addiction is immunization with vaccines that induce antibodies that can abrogate the addictive effects of the drug of abuse. One of the challenges in the development of a vaccine against drugs of abuse is the availability of an optimum procedure that gives reproducible and high yielding hapten-protein conjugates. In this study, a heroin/morphine surrogate hapten (MorHap) was coupled to bovine serum albumin (BSA) using maleimide-thiol chemistry. MorHap-BSA conjugates with 3, 5, 10, 15, 22, 28, and 34 haptens were obtained using different linker and hapten ratios. Using this optimized procedure, MorHap-BSA conjugates were synthesized with highly reproducible results and in high yields. The number of haptens attached to BSA was compared by 2,4,6-trinitrobenzenesulfonic acid (TNBS) assay, modified Ellman’s test and matrix assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS). Among the three methods, MALDI-TOF MS discriminated subtle differences in hapten density. The effect of hapten density on enzyme-linked immunosorbent assay (ELISA) performance was evaluated with seven MorHap-BSA conjugates of varying hapten densities, which were used as coating antigens. The highest antibody binding was obtained with MorHap-BSA conjugates containing 3–5 haptens. This is the first report that rigorously analyzes, optimizes and characterizes the conjugation of haptens to proteins that can be used for vaccines against drugs of abuse. The effect of hapten density on the ELISA detection of antibodies against haptens demonstrates the importance of careful characterization of the hapten density by the analytical techniques described.     

Cellulose nanofibril (CNF) reinforced starch insulating foams

In this study, biodegradable foams were produced using cellulose nanofibrils (CNFs) and starch (S). The availability of high volumes of CNFs at lower costs is rapidly progressing with advances in pilot-scale and commercial facilities. The foams were produced using a freeze-drying process with CNF/S water suspensions ranging from 1 to 7.5 wt% solids content. Microscopic evaluation showed that the foams have a microcellular structure and that the foam walls are covered with CNF’s. The CNF’s had diameters ranging from 30 to 100 nm. Pore sizes within the foam walls ranged from 20 to 100 nm. The materials’ densities ranging from 0.012 to 0.082 g/cm³ with corresponding porosities between 93.46 and 99.10 %. Thermal conductivity ranged from 0.041 to 0.054 W/m-K. The mechanical performance of the foams produced from the starch control was extremely low and the material was very friable. The addition of CNF’s to starch was required to produce foams, which exhibited structural integrity. The mechanical properties of materials were positively correlated with solids content and CNF/S ratios. The mechanical and thermal properties for the foams produced in this study appear promising for applications such as insulation and packaging.     

The effect of molecular weight on the separation of semiconducting single‐walled carbon nanotubes using poly(2,7‐carbazole)s

The use of selective interactions between conjugated polymers and single‐walled carbon nanotubes has emerged as a promising method for the separation of nanotubes by electronic type. Although much attention has been devoted to investigating polyfluorenes and their ability to disperse semiconducting carbon nanotubes under specific conditions, other polymer families, such as poly(2,7‐carbazole)s, have been relatively overlooked. Poly(2,7‐carbazole)s have been shown to also preferentially interact with semiconducting carbon nanotubes, however a detailed investigation of polymer parameters, such as molecular weight, has not been performed. We have prepared seven different molecular weights of a poly(2,7‐carbazole), from short chain oligomers to high molecular weight polymers, and have investigated their effectiveness at dispersing semiconducting single‐walled carbon nanotubes. Although all polymer chain lengths were able to efficiently exfoliate carbon nanotube bundles using a mild dispersion protocol, only polymers above a certain threshold molecular weight (M_n ～ 27 kDa) were found to exhibit complete selectivity for semiconducting nanotubes, with no observable signals from metallic species. Additionally, we found the quality of separation to be strongly dependent on the ratio of polymer to carbon nanotube. Contrary to previous reports, we have found that an excess of poly(2,7‐carbazole) leads to incomplete removal of metallic carbon nanotubes. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2510–2516     

Beyond microstructures: Using the Kerr Effect to characterize the macrostructures of synthetic polymers

The macrostructures of synthetic polymers are essentially the complete molecular chain architectures, including the types and amounts of constituent short‐range microstructures, such as the regio‐ and stereosequences of the inserted monomers, the amounts and sequences of monomers found in co‐, ter‐, and tetra‐polymers, branching, inadvertent, and otherwise, etc. Currently, the best method for characterizing polymer microstructures uses high field, high resolution ¹³C‐nuclear magnetic resonance (NMR) spectroscopy observed in solution. However, even ¹³C‐NMR is incapable of determining the locations or positions of resident polymer microstructures, which are required to elucidate their complete macrostructures. The sequences of amino acid residues in proteins, or their primary structures, cannot be characterized by NMR or other short‐range spectroscopic methods, but only by decoding the DNA used in their syntheses or, if available, X‐ray analysis of their single crystals. Similarly, there are currently no experimental means to determine the sequences or locations of constituent microstructures along the chains of synthetic macromolecules. Thus, we are presently unable to determine their macrostructures. As protein tertiary and quaternary structures and their resulting ultimate functions are determined by their primary sequence of amino acids, so too are the behaviors and properties of synthetic polymers critically dependent on their macrostructures. We seek to raise the consciousness of both synthetic and physical polymer scientists and engineers to the importance of characterizing polymer macrostructures when attempting to develop structure–property relations. To help achieve this task, we suggest using the electrical birefringence or Kerr effects observed in their dilute solutions. The molar Kerr constants of polymer solutes contributing to the birefringence of their solutions, under the application of a strong electric field, are highly sensitive to both the types and locations of their constituent microstructures. As a consequence, we may begin to characterize the macrostructures of synthetic polymers by means of the Kerr effect. To simplify implementation of the Kerr effect to characterize polymer macrostructures, we suggest that NMR first be used to determine the types and amounts of constituent microstructures present. Subsequent comparison of observed Kerr effects with those predicted for different microstructural locations along the polymer chains can then be used to identify the most likely macrostructures. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 155–166     

Spermine binding to Parkinson's protein alpha-synuclein and its disease-related A30P and A53T mutants

Aggregation of alpha-synuclein (alpha-syn), a protein implicated in Parkinson's disease (PD), is believed to progress through formation of a partially folded intermediate. Using nanoelectrospray ionization (nano-ESI) mass spectrometry combined with ion mobility measurements we found evidence for a highly compact partially folded family of structures for alpha-syn and its disease-related A53T mutant with net charges of -6, -7, and -8. For the other early onset PD mutant, A30P, this highly compact population was only evident when the protein had a net charge of -6. When bound to spermine near physiologic pH, all three proteins underwent a charge reduction from the favored solution charge state of -10 to a net charge of -6. This charge reduction is accompanied by a dramatic size reduction of about a factor of 2 (cross section of 2600 A2 (-10 charge state) down to 1430 A2 (-6 charge state)). We conclude that spermine increases the aggregation rate of alpha-syn by inducing a collapsed conformation, which then proceeds to form aggregates.     

Transient ordering in a quasi-two-dimensional liquid near freezing

We report the results of a theoretical study of locally ordered fluctuations in a quasi-two-dimensional colloid fluid. The fluctuations in the equilibrium state are monitored by the aperture cross-correlation function of radiation scattered by the fluid, as calculated from molecular dynamics simulations of near hard spheres with diameter sigma confined between smooth hard walls. These locally ordered fluctuations are transient; their decay can be monitored as a function of the time between the cross-correlated scattered radiation signals, but only the single-time cross-correlated signals are discussed in this paper. Systems with thicknesses less than two hard sphere diameters were studied. For wall separation H in the range 1 sigma/=1.57 sigma, hexagonal fluctuations persist in the dense liquid up to H=1.75 sigma, and fluctuations with square ordered symmetry, that of the solid to which the liquid freezes, only emerge at densities approximately 2% below freezing. For H=1.8 sigma and 1.85 sigma, hexagonal ordered flucuations are no longer found, and the square ordered fluctuations dominate the dense liquid region as the system freezes into a two layer square solid. For H=1.9 sigma and 1.95 sigma, where the liquid freezes into a two layer hexagonal solid, both square and hexagonal ordered fluctuations are observed. At lower densities, the ordered fluctuations only exhibit square symmetry. Hexagonal ordered fluctuations appear at densities approximately 7% below freezing and become more dominant as the density is increased, but the square ordered fluctuations persist until the system is converted into the solid.