Numerical study on strained InGaAsP/InGaP quantum wells for 850-nm vertical-cavity surface-emitting lasers

The physical and optical properties of compressively strained InGaAsP/InGaP quantum wells for 850-nm vertical-cavity surface-emitting lasers are numerically studied. The simulation results show that the maximum optical gain, transparency carrier densities, transparency radiative current densities, and differential gain of InGaAsP quantum wells can be efficiently improved by employing a compressive strain of approximately 1.24% in the InGaAsP quantum wells. The simulation results suggest that the 850-nm InGaAsP/InGaP vertical-cavity surface-emitting lasers have the best laser performance when the number of quantum wells is one, which is mainly attributed to the non-uniform hole distribution in multiple quantum wells due to high valence band offset. PACS 42.55.Px; 78.20.-e; 78.20.Bh; 78.30.Fs     

Vorticity-streamfunction formulation of unsteady incompressible flow past a cylinder: Sensitivity of the computed flow field to the location of the outflow boundary

The influence of the location of the outflow computational boundary on the unsteady incompressible flow past a circular cylinder at Reynolds number 100 is examined. The vorticity-streamfunction formulation of the Navier-Stokes equations is used in all computations. Two types of outflow boundary conditions are subjected to a series of tests in which the domain length is gradually reduced. The traction-free condition performs well in most cases and allows the outflow boundary to be located as close as 6.5 cylinder diameters from the body. The other boundary condition type is not as forgiving, but has the advantage of being simpler to implement and can still provide reasonably accurate solutions. It is also observed that both condition types can influence the flow field strongly and globally when the boundary is brought closer than 2.5 diameters from the body. In such cases the temporal periodicity of the solution is lost.     

Thermally-induced order-order transition of DNA-cationic surfactant complexes

Polyanionic DNA interacts with cationic amphiphiles to form electrostatic complexes exhibiting rich self-assembled structures. This type of complex has been considered as a nonviral carrier in gene therapy and as a template for nanostructure construction. Here we report a thermally-induced phase transition of the complexes of DNA with the mixtures of a cationic surfactant, dodecyltrimethyl bromide (DTAB), and a neutral lipid, dioleoylphosphatidylethanolamine (DOPE), in fully hydrated state. An order-order transition between a multilamellar (L(c)alpha) phase and an inverted hexagonal (H(c)II) phase was found to occur with the transition temperature adjustable by the DTAB-to-DNA base pair molar ratio (x) and DOPE-to-DTAB molar ratio (m). The stability of the L(c)alpha phase was enhanced at lower m and x, as the L(c)alpha-to-H(c)II transition temperature increased with the decreases of these two parameters. The suppression of -to- transition at lower x was attributed to the lower entropic gain from the counterion release due to the presence of uncomplexed DNA in the bulk solution.     

Comparative analysis of the machine repair Problem with imperfect coverage and service pressure condition

In this paper we analyze the warm-standby M/M/R machine repair problem with multiple imperfect coverage which involving the service pressure condition. When an operating machine (or warm standby) fails, it may be immediately detected, located, and replaced with a coverage probability c by a standby if one is available. We use a recursive method to develop the steady-state analytic solutions which are used to calculate various system performance measures. The total expected profit function per unit time is derived to determine the joint optimal values at the maximum profit. We first utilize the direct search method to measure the various characteristics of the profit function followed by Quasi-Newton method to search the optimal solutions. Furthermore, the particle swarm optimization (PSO) algorithm is implemented to find the optimal combinations of parameters in the pursuit of maximum profit. Finally, a comparative analysis of the Quasi-Newton method with the PSO algorithm has demonstrated that the PSO algorithm provides a powerful tool to perform the optimization problem.     

Curing and pyrolysis of epoxy resins containing 2-(6-oxido-6<Emphasis Type="Italic">H</Emphasis>-dibenz(<Emphasis Type="Italic">c</Emphasis>,<Emphasis Type="Italic">e</Emphasis>)(1,2)oxaphosphorin-6-yl)-1,4-naphthalenediol or bisphenol S

This work examines the curing kinetics, thermal properties, and decomposition kinetics of diglycidyl ether of bisphenol A (DGEBA) epoxies with three different curing agents, 2-(6-oxido-6H-dibenz(c,e)(1,2)oxaphosphorin-6-yl)-1,4-naphthalenediol (ODOPN), bisphenol A (BPA), and bisphenol S (BPS). The differential scanning calorimetry curing study reveals that the curing kinetics of the DGEBA/ODOPN epoxy is first order, independent of the scan rate. The ODOPN-containing epoxy, unlike the conventional BPA one, includes a phosphorus-containing bulky pendant aromatic group and results in an increase in the glass-transition temperature of 83 K, the char yield increases by a factor of 3, and the limiting oxygen index values increase from 23 to 27. For the BPS system, the glass-transition temperature increased slightly, and both the char yield and the limiting oxygen index value increased insignificantly when the test was conducted in air. Finally, the thermogravimetric analysis decomposition study in N₂ from Ozawa's analysis demonstrates that the DGEBA/BPS epoxy has the highest activation energy, followed by the regular DGEBA/BPA system, and lastly the DGEBA/ODOPN has the lowest activation energy. The low activation energy for the ODOPN system is attributed to the initial decomposition of the phosphorus compound in the formation of an insulating layer.     

Gas-phase complexation of polyethers with halide ions

Gas-phase complexes of halide anions with a variety of crown ethers and acyclic analogs are formed by ion-molecule reactions in the chemical ionization source of a triple-quadrupole mass spectrometer. The ether complexes of iodide, bromide, and chloride dissociate on collisional activation by cleavage of the halide-ether electrostatic hydrogen bonds, resulting in the formation of bare halide anions. By contrast, the fluoride complexes dissociate by loss of HF, which may occur in conjunction or sequentially with losses of ethylene oxide units. This dissociation behavior is similar to that observed for collisionally activated dissociation of [M ? H]^? ions of the crown ethers and suggests that the fluoride ion is capable of promoting an intramolecular proton abstraction within the [M+F]^? complex. This type of dissociation chemistry is only observed for the fluoride ion complexes, and the fluoride ion is the most basic of all the halides. The kinetic method was used to establish orders of relative halide binding strengths, and the trends for the chloride and bromide affinities were 12-crown-4 < triethylene glycol dimethyl ether < 15-crown-5 < tetraethylene glycol dimethyl ether < 18-crown-6 < 21-crown-7 < tetraethylene glycol < pentaethylene glycol < 1,4,7,10,13-pentathiacyclopentadecane.     

Tricarbonyl(dialkylamidocyclohexa-1,3-diene)iron: Preparation,Isomerization and Stereochemistry

The direct reaction of iron pentacarbonyl with diethylamidocyclohexadiene gave three isomeric tricarbonyliron complexes, 1, 2 and 3. Only 1 isomerized to give 2 under acidic conditions, whereas 3 remained unchanged. The chemical properties of the tricarbonyl(amidocyclohexadiene)iron complexes differed from those of the tricarbonyl(carboxycyclohexadiene)iron complexes. Complex 3 which underwent no hydride abstraction with triphenylmethyl hexafluorophosphate, has an exo stereochemistry.     

New rigid-rod poly(benzoxazole-imide)s containing chloro-substituted p-phenylene units in the main chain

A series of new poly(o-hydroxy amide-imide)s with high molecular weights were synthesized by low-temperature solution polycondensation from a preformed imide ring and chloro- or dichloro-substituted p-phenylene-containing diacid chlorides of 2,5-bis(trimellitimido)chlorobenzene or 1,4-bis(trimellitimido)-2,5-dichlorobenzene and three bis(o-amino phenol)s. All the poly(o-hydroxy amide-imide)s were readily soluble in a variety of organic solvents such as N-methyl-2-pyrrolidone and N,N-dimethylacetamide. Transparent and flexible films of these polymers were cast from their solutions. The cast films had tensile strengths ranging from 88 to 102 MPa and elongations at break of 8–12%. Subsequent thermal cyclodehydration of the poly(o-hydroxy amide-imide)s afforded novel poly(benzoxazole-imide)s. The poly(benzoxazole-imide)s exhibited glass-transition temperatures in the range of 310–338 °C and were stable up to 500 °C in nitrogen, with 10% weight-loss temperatures recorded between 550 and 570 °C in nitrogen. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4151–4158, 1999     

Efficient acid catalytic synthesis of pyrazolopyrimidines from 1H-pyrazol-5-yl-N,N-dimethylformamidines with cyanamide

The efficient acid catalytic synthesis of pyrazolo [3,4-d]pyrimidine was developed by treating 1H-pyrazol-5-yl-N,N-dimethylformamidine with various aminating agents including N,O-bis(trimethylsilyl)hydroxylamine (NHSiMe₃(OSiMe₃)), cyanamide (NH₂CN), hydroxylamine (NH₂OH), methoxyamine (NH₂OMe), hydrazine (NH₂NH₂), and urea (NH₂C(O)NH₂) in acidic solution at reflux. Based on the experimental result, cyanamide (NH₂CN) and methanesulfonic acid were indicated the best aminating agent and acid mediated solvent. On the other hands, the reactivity tendency was involved the activity of original leaving species grafting on the aminating agents, such as –OH, –OMe, –OSiMe₃, –NH₂, –OSiMe₃, –C(O)NH₂, and –CN, in acid catalytic heterocyclic reaction.