Automated determination of fatty acid methyl ester and cis/trans methyl ester composition of fats and oils

The determination of the fatty acid composition (as methyl esters, FAMEs) of fats and oils and their cis/trans (CTME) distribution requires a simple, but manual and time-consuming sample preparation. The so-called BF3 method is often the preferred procedure. Because FAME/CTME analyses are encountered very frequently in the food industry, an automated, robot-based alternative is proposed which uses the sodium methylate procedure. After sample weighing and the (manual) addition of heptane (2 min), a XYZ robotic autosampler is used for all remaining work, which includes reagent addition, agitation, sample settling and the final injection into the gas chromatograph (10 min). The performance of the sodium methylate and BF3 methods are compared by analysing some 30 oil and fat samples. The novel procedure is much faster (less than 15 min versus ca. 1 h) and manual sample handling is drastically decreased. The experimental results obtained with the two methods frequently are the same, while small differences can be explained by (known) differences of the two methods in the conversion of minor oil/fat constituents, such as free fatty acids, wax esters and sterol esters. In case of FAME analyses, a hot injection is to be preferred over a cold injection. The RSDs of the peak areas were 1.5% for the major fatty acids to 11% for peaks that were just above the noise level. The detection limit were approximately 0.03%.     

Non-linear density dependence of rotational line-broadening of HCl in dense argon

The rotational far-infrared spectra of HCl in argon at densities between 100 and 480 amagat and T = 162.5 K are presented. The observed density dependence of the width of the different rotational lines is non-linear and differs for high- and low-frequency lines. An Enskog correction to the collision frequency in the dense gas fails to account for the density dependence of the high rotational lines. It is argued that the many-body character of the relaxation mechanism should be taken into account. Comparison with the results of MD calculations on argon indicates that such an approach may explain the observed density dependence.     

BIOCHEMICAL ISOLATION AND SPECTROSCOPIC CHARACTERIZATION OF POSSIBLE PHOTORECEPTOR PIGMENTS FOR PHOTOTAXIS IN A FRESHWATER Peridinium

Photoreceptor pigments have been isolated biochemically from the freshwater dinoflagellate Peridinium gatunense, and characterized spectroscopically. At least four different chromoproteins can be detected in the crude extract and the membrane fraction isolated from the cells absorbing at 580, 638, 667 and 710 nm, which correspond with the maxima in the action spectrum for phototaxis in this organism. Light energy absorbed by shorter wavelength pigments is emitted as fluorescence at wavelengths which are absorbed by pigments with maxima at longer wavelengths. Protein separation on a MonoQ anion exchanger column using fast liquid chromatography resulted in a non-bound fraction and four bound fractions eluted by an NaCI gradient, which differed in their pigment composition.     

Hyperfine structure of SrCl X2∑+ by microwave—optical polarization spectroscopy

The hyperfine structure of the X²∑⁺, υ = 0 state of ⁸⁸Sr³⁵Cl has been investigated using microwave—optical polarization spectroscopy. Resolution of the hyperfine structure in transitions between low-lying rotational states has allowed the first determination of magnetic dipole and electric quadrupole coupling constants. The results are: b = 18.663(89) MHz, c = 7.72(30)MHz, and eqQ = 3.96(84) MHz.     

Molecular gradients: an efficient approach for optimizing the surface properties of biomaterials and biochips

A variety of molecular gradients of alkanethiols with the structure HS-(CH(2))(m)-X (m = 15; X = COOH, CH(2)NH(2), or CH(3)) and oligo(ethylene glycol)-terminated alkanethiols with the structures HS-(CH(2))(15)-CO-NH-Eg(n) (n = 2, 4, or 6), HS-(CH(2))(15)-CO-NH-Eg(2)-(CH(2))(2)-NH-CO-(CH(2))(4)-biotin, and HS-(CH(2))(15)-CO-NH-Eg(6)-CH(2)-COOH were prepared on polycrystalline gold films. These gradients were designed to serve as model surfaces for fundamental studies of protein adsorption and immobilization phenomena. Ellipsometry, infrared spectroscopy, and X-ray photoelectron spectroscopy, operating in scanning mode, were used to monitor the layer composition, gradient profiles, tail group conformation, and overall structural quality of the gradient assemblies. The gradient profiles were found to be 4-10 mm wide, and they increased in width with increasing difference in molecular complexity between the thiols used to form the gradient. The oligo(ethylene glycol) thiols are particularly interesting because they can be used to prepare so-called conformational gradients, that is, gradients that display a variation in oligo(ethylene glycol) chain conformation from all trans on the extreme Eg(2,4) sides, via an amorphous-like phase in the mixing regimes, to helical at the extreme Eg(6) sides. We demonstrate herein a series of experiments where the above gradients are used to evaluate nonspecific binding of the plasma protein fibrinogen, and in agreement with previous studies, the highest amounts of nonspecifically bound fibrinogen were observed on all-trans monolayers, that is, on the extreme Eg(2,4) sides. Moreover, gradients between Eg(2) and a biotinylated analogue have been prepared to optimize the conditions for the immobilization of streptavidin. Ellipsometry and infrared spectroscopy reveal high levels of immobilization over a fairly broad range of compositions in the gradient regime, with a maximum between 50 and 60% of the biotinylated analogue in the monolayer. A pI gradient composed of (NH(3)(+)/COO(-))-terminated thiols was also prepared and evaluated with respect to its ability to separate differently charged proteins, pepsin, and lysozyme, on a solid surface.     

Thermosensitive mucoadhesive gel formulation loaded with 5-Fu: cyclodextrin complex for HPV-induced cervical cancer

Human Papilloma Virus (HPV) infections are the major cause of cervical cancers. To achieve a better therapeutic efficacy and patient compliance in the treatment for HPV-induced cervical cancers, anticancer agent 5-fluorouracil has been formulated in a vaginal gel using the thermosensitive polymer Pluronic^® F127 together with alternative mucoadhesive polymers e.g., hyaluronic acid, Carbopol 934 and hydroxypropylmethylcellulose. To increase its aqueous solubility and to achieve the complete release of 5-FU from the gel, the drug was incorporated as its inclusion complex with 1:1 molar ratio with either β-cyclodextrin or hydroxypropyl-β-cyclodextrin. Following the characterization of drug:CD complexes, thermosensitive gel formulations containing different mucoadhesive polymers and the drug in free or complexed form were characterized in vitro by determining the gelation temperature and the rheological behavior of different formulations along with the in vitro release profiles of these formulations in pH 5.5 citrate buffer. It was observed that complexation with cyclodextrin accelerated the release of 5-FU with the exception of formulation containing Carbopol 934 as mucoadhesive polymer. As far as rheological properties are concerned, favorable thermosensitive in situ gelling properties were obtained with formulations containing HPMC as mucoadhesive polymer. Complete release of 5-FU from gels were obtained with both complexes of β-CD and HP-β-CD and cytotoxicity studies against HeLa human cervical carcinoma cells demonstrated that 1% 5-FU:CD complexes were equally effective as 1% free 5-FU indicating better therapeutic efficacy with lower dose.     

S-4-methylphenyl-o,o-bis[1-benzotriazolyl] phosphorothioate: a versatile phosphorylating agent

The phosphorylating agent obtained by treatment of S-4-methylphenyl phosphorodichloridothioate with 1-hydroxybenzotriazole can not only be applied for the introduction of polyphosphate functions at the terminal ends of nucleic acids, but also for the formation of 3′-5′-phosphotriester linkages.     

LIGHT-INDUCED CHEMOTACTIC REACTIONS IN THE DINOFLAGELLATE, Peridiniopsis berolinensis

Abstract The photosensitizer riboflavin induces accumulation of the colorless flagellate Peridiniopsis berolinensis in a light field at low photon fluence rates but dispersal from a light field at high photon fluence rates. The wavelength dependence of the accumulation resembles the absorption spectrum of riboflavin in the visible range. The photodynamic effects are caused by a positive or negative chemotactic response to photoproducts in the medium which are produced by photochemical reactions of the dye.     

Infrared spectra and relative stability of the F3CH/NH3 H-bonded complex in liquefied Xe

FTIR spectra of mixtures of fluoroform (F3CH) and ammonia (NH3), have been studied in liquid xenon between 5400 and 500 cm-1. Spectroscopic evidence for the formation of a hydrogen bonded complex has been found and the complexation enthalpy Delta(LXe)H degrees in the temperature interval between 173 and 215 K, was determined to be 14.4 (7) kJ mol-1. The parallel fundamentals nu1 and nu2 of ammonia reveal a strong narrowing effect upon complex formation, whereas the perpendicular fundamentals nu3 and nu4 show a modest decrease of their width. CP corrected ab initio calculations at the MP2(FULL)/6-311++G(3df,2pd) level predict a linear geometry for the complex, characterized by a small red shift of the CH stretch frequency of fluoroform. The ab initio interaction energy was found to be compatible with the isolated molecule complexation energy extrapolated from the experimental Delta(LXe)H degrees .