New Analytical Method using Coupled Enzymes for Determination of Polyunsaturated Fatty Acid Content in Olive Oil

A new, simple, and original method is described for specific measurement of polyunsaturated fatty acid content in olive oil. This analytical system uses coupled enzymes, lipase and lipoxygenase. The system consists of lipase-catalyzed hydrolysis of triacylglycerol and subsequent lipoxygenation of liberated polyunsaturated fatty acids. The hydroperoxy-fatty acids formed were easily monitored by spectrophotometry at 234 nm. After being optimized, the method was validated in terms of linearity, precision sensitivity, and recovery. Linear calibration graph was obtained in the range 50–500 µg mL^?1, with a correlation coefficient higher than 0.921 and a detection limit (S/N?=?3) of 15 µg mL^?1. The precision of the method (relative standard deviation) for within and between days is better than 7% and 12%, respectively. The proposed method was successfully applied to the estimation of polyunsaturated fatty acids level in olive oil samples and results obtained were in excellent agreement with those obtained by the classical official method. The proposed method is accurate, simple, cheap, and can be satisfactorily used for routine analysis of edible oils.     

Transformations de N-acylaziridines catalysées par des supports à base de silice et d’alumine : une élucidation mécanistique

The silica gel, neutral alumina and acid activated clays transform the N-acyl-2,2-dimethylaziridines 1 into a mixture of N-methallylamides 2, oxazolines 3 and amidoalcohols 4. The reaction of N-benzoyl-2,2-dimethylaziridine with benzylcyanid anion leads to a mixture of amidopyrroline 5 and iminopyrrolidine 6. The product 5 was converted into its tautomer 6 by chromatogaphy on silica gel. Ionic mechanisms were then proposed to explain the formation of products 2–6 resulting from the regioselective ring opening on the more substituted C2 carbon side.     

Electron affinities of biscyclopentadienyl and phospholyl uranium(IV) borohydride complexes: Experimental and DFT studies

Electron affinities (EAs) of a series of biscyclopentadienyl and phospholyl uranium(IV) complexes L₂U(BH₄)₂ [L₂ = Cp₂, (tmp)₂, (tBuCp)₂, (Cp*)(tmp) and Cp*₂] related to the U(III)/U(IV) redox system were calculated using relativistic Density Functional Theory (DFT) based methods coupled with the Conductor-like Screening Model for Real Solvents (COSMO-RS) approach. Electrochemical measurements of half-wave potentials in solution (tetrahydrofuran THF) were carried out for all these compounds under the same rigorous conditions. A good correlation (r² = 0.99) is obtained between the calculated EA values, at the ZORA/BP86/TZ2P level, and the half-wave reduction potentials measured by electrochemistry. The investigations bring to light the importance of spin-orbit coupling and solvent effect and the use of a large basis set in order to achieve such a good agreement between theory and experiment. The study confirms the instability of the Cp₂U(BH₄)₂ complex during the reduction process. The influence of the substituted aromatic ligand L₂, namely their electron donating ability, on EA was studied. The role of involved orbitals (singled occupied molecular orbital –SOMO– of anionic species or lowest unoccupied molecular orbital –LUMO– of neutral species) in the redox process was revealed.     

Simple and efficient cleavage reaction of the boc group in heterocyclic compounds

Dedicated to the memory of Pr. Ladjama Daif A series of chiral cyclosulfamides have been synthesized by alkaline cyclisation starting from N‐benzoylamino acids (Ala, Val, Leu, Phe) derivatives and chlorosulfonyl isocyanate. A simplified and regioselective deprotection of the cyclic compounds (cyclosulfamides) containing the tert‐butyloxycarbonyl group (Boc) has been achieved in good yield by fusion under reduced pressure.     

Access to New Endoperoxide Derivatives by Electrochemical Oxidation of Substituted 3‐Azabicyclo[4.1.0]hept‐4‐enes

A series of substituted 3‐azabicyclo[4.1.0]hept‐4‐ene derivatives were prepared and analysed by cyclic voltammetry. Preparative aerobic electrochemical oxidation reactions were then carried out. Three original endoperoxides were isolated, characterised and subjected to antimalarial and cytotoxicity activity assays.     

Stability indicating method for famotidine in pharmaceuticals using porous graphitic carbon column

A simple, sensitive and rapid HPLC method was developed and validated for the simultaneous determination of famotidine (FMT) and related impurities in pharmaceuticals. Chromatographic separation was accomplished within 10 min on a porous graphitic carbon (PGC) column using 50:50 v/v ACN-water containing 0.5% pentane sulphonic acid (PSA) as the mobile phase. Separation was achieved with a flow rate of 1 mL/min and a detection wavelength of 265 nm. The calibration curves were linear over a concentration range of 1.5-100 microg/mL. The intra- and interday RSDs (n = 5) for the retention times and peak area were all less than 2%. The method was sensitive with an LOD (S/N = 3) of 0.1 microg/mL for FMT, imp. C and 0.05 microg/mL for imp. 2, A and D. All recoveries were greater than 98%. The method was demonstrated to be precise, accurate and specific with no interference from the tablet ingredients and separation of the drug peak from the peaks of the degradation products (oxidative degradation and acid and base degradation). The results indicated that the proposed method could be used for the determination of FMT in commercial dosage forms and as a stability-indicating assay.     

Polyamine-substituted epoxy-grafted silica for aqueous metal recovery

Glycidoxypropyltriethoxysilane (GPS) was used as a reactive silane to graft metal- complexing ligands onto silica gel in aqueous media under mild conditions. The synthesis entailed the reaction of GPS with silica gel, followed by grafting polyamine onto the epoxy functional group. GPS was added to silica gel in ethanol with 5 vol. % water and the mixture was air-dried for 24 h. Subsequently, excess amounts of polyamines: triethylenetetramine, tetraethylenepentamine, and pentaethylenehexamine were individually added to the silanised silica, followed by solvent evaporation and ovendrying at 60°C. The ligand-grafted silica gel particles showed a rapid heavy metal uptake in batch or flow-through experiments with capacities reaching 0.1 mmol g⁻¹ for copper, zinc, cadmium, or lead ions. Columns packed with the modified particles could be readily regenerated by acid-washing with only a small decrease in activity. The particles could be used for the colourimetric detection of heavy metal pollution or for pre-concentration for analytical purposes. Competition between Cu²⁺, Zn²⁺, Pb²⁺, and Cd²⁺ ions for the three synthesised silica showed that Cu²⁺ ions were adsorbed more strongly than the other metal ions. The general method developed can be applied to graft other molecules with terminal amino groups for other purposes.     

Nanoporous carbons as promising novel methane adsorbents for natural gas technology

Nanoporous carbons were synthesized using furfuryl alcohol and sucrose as precursors and MCM-41 and mordenite as nanoporous templates.The produced nanoporous carbons were used as adsorbent for methane storage.The average pore diameter of the samples varied from 3.9 nm to 5.9 nm and the BET surface area varied from 320m2/g to 824m2/g.The volumetric adsorption experiments revealed that MCM-41 and sucrose had better performance compared with mordenite and furfuryl alcohol,correspondingly.Also,the effect of precursor to template ratio on the structure of nanoporous carbons and their adsorption capacities was investigated.The nanoporous carbon produced from MCM-41 mesoporous molecular sieve partially filled by sucrose shows the best methane adsorption capacity among the tested samples.     

Purification and structure elucidation of three naturally bioactive molecules from the new terrestrial Streptomyces sp. TN17 strain

Thirty litres of fermentation broth was extracted from the newly isolated Streptomyces sp. strain TN17 and various separation and purification steps led to the isolation of three pure bioactive compounds (1-3). Compound 1: cyclo (L-Leu-L-Arg), a diketopiperazine 'DKP' derivative; 2: di-(2-ethylhexyl) phthalate, a phthalate derivative; and 3: cyclo 1-[2-(cyclopentanecarbonyl-3-phenyl-propionyl]-pyrrolidine-2-carboxylic acid (1-carbamoyl-propyl)-amide, a cyclic tetrapeptide derivative. The chemical structure of these three active compounds was established on the basis of spectroscopic studies (MS and NMR) and by comparison with data from the literature. According to our biological studies, the pure compounds (1-3) possess antibacterial and antifungal activities.     

Advanced Sensing of Antibiotics with Magnetic Gold Nanocomposite: Electrochemical Detection of Chloramphenicol

The sensing and accurate determination of antibiotics in various environments represents a big challenge, mainly owing to their widespread use in medicine, veterinary practice, and other fields. Therefore, a new, simple electrochemical sensor for the detection of antibiotic chloramphenicol (CAP) has been developed in this work. The amplification strategy of the sensor is based on the application of magnetite nanostructures stabilized with carboxymethyl cellulose (Fe₃O₄‐CMC) and decorated with nanometer‐sized Au nanoparticles (NPs) (Fe₃O₄‐CMC@Au). In this case, CMC serves as a stabilizing agent, preventing the aggregation of Fe₃O₄ NPs, and hence, enabling the kinetic barrier for electron transport to be overcome, and the Au NPs serve as an electron‐conducting tunnel for better electron transport. As a proof of concept, the developed nanosensor is used for the detection of CAP in human urine samples, giving a recovery value of around 97 %, which indicates the high accuracy of the as‐prepared nanosensor.