Synthesis,Characterization, and In Vitro Antimicrobial Activity of Methyleneamine‐Linked Bis‐heterocycles

A new class of methyleneamine‐linked bis‐heterocycles that exhibit antimicrobial activity was synthesized. Bromination of 1 followed by condensation with thiourea gave 3 . The reaction of 3 with propargyl bromide in dry toluene under inert atmosphere led to the formation of 4 . Its subsequent reaction with different nitrile oxides using CuSO₄.5H₂O–sodiumascorbate system in a 2:1 mixture of water and tert‐butyl alcohol yielded the title compounds 6a , 6b , 6c , 6d , 6e , 6f , 6g , 6h , 6i , 6j , 6k , 6l in good yields. The identities of these compounds were confirmed following elemental analysis, IR, ¹H, ¹³C NMR, and mass spectral studies. All the title compounds exhibited pronounced in vitro antibacterial and antifungal activities.     

Near‐IR Absorbing Ruthenium Complexes of Non‐Innocent 6,12‐Di(pyridin‐2‐yl)indolo[3,2‐b]carbazole: Variation as a Function of Co‐Ligands

This article deals with the hitherto unexplored metal complexes of deprotonated 6,12‐di(pyridin‐2‐yl)‐5,11‐dihydroindolo[3,2‐b]carbazole (H₂L). The synthesis and structural, optical, electrochemical characterization of dimeric [{Ru^III(acac)₂}₂(μ‐L^.?)]ClO₄ ([ 1 ]ClO₄, S=1/2), [{Ru^II(bpy)₂}₂(μ‐L^.?)](ClO₄)₃ ([ 2 ](ClO₄)₃, S=1/2), [{Ru^II(pap)₂}₂(μ‐L^2?)](ClO₄)₂ ([ 4 ](ClO₄)₂, S=0), and monomeric [(bpy)₂Ru^II(HL^?)]ClO₄ ([ 3 ]ClO₄, S=0), [(pap)₂Ru^II(HL^?)]ClO₄ ([ 5 ]ClO₄, S=0) (acac=σ‐donating acetylacetonate, bpy=moderately π‐accepting 2,2’‐bipyridine, pap=strongly π‐accepting 2‐phenylazopyridine) are reported. The radical and dianionic states of deprotonated L in isolated dimeric 1 ⁺/ 2 ³⁺ and 4 ²⁺, respectively, could be attributed to the varying electronic features of the ancillary (acac, bpy, and pap) ligands, as was reflected in their redox potentials. Perturbation of the energy level of the deprotonated L or HL upon coordination with {Ru(acac)₂}, {Ru(bpy)₂}, or {Ru(pap)₂} led to the smaller energy gap in the frontier molecular orbitals (FMO), resulting in bathochromically shifted NIR absorption bands (800–2000 nm) in the accessible redox states of the complexes, which varied to some extent as a function of the ancillary ligands. Spectroelectrochemical (UV/Vis/NIR, EPR) studies along with DFT/TD‐DFT calculations revealed (i) involvement of deprotonated L or HL in the oxidation processes owing to its redox non‐innocent potential and (ii) metal (Ru^III/Ru^II) or bpy/pap dominated reduction processes in 1 ⁺ or 2 ²⁺/ 3 ⁺/ 4 ²⁺/ 5 ⁺, respectively.     

Electrochemical behavior of anthraquinone in aqueous solution in presence of a non-ionic surfactant

Cyclic voltammetric behavior of anthraquinone in aqueous medium has been studied in presence of a non-ionic surfactant, Triton X-100 (TX-100) using sodium salt of anthraquinone-2-sulphonic acid (AQS) as the electro-active species. When cathodic potential is applied, the anthraquinone (AQ) group of AQS is reduced to its dianion. In the reverse scan, the oxidation of AQ²⁻ gives AQ. The electrochemical behavior shows a profound influence from the dissolved state of TX-100 in aqueous media. Spectrophotometric results indicate interaction between AQ and TX-100. A CEC (chemical–electrochemical–chemical) mechanism with the electrochemical reaction coupled with preceding interaction of AQS with TX-100 and following protonation reaction of reduced AQ has been proposed.     

Micellization and Clouding Phenomenon of Phenothiazine Drug Promethazine Hydrochloride: Effect of NaCl and Urea Addition

Herein we report the micellization and clouding behavior of promethazine hydrochloride (PMT) in absence and presence of NaCl/ureas. The critical micelle concentration (CMC) of PMT is measured by conductivity method and the values decrease with increasing the NaCl concentration. With increasing the temperature, the CMC first increases then decreases. At 25°C, the maximum CMC values were obtained (with or without NaCl). The thermodynamic parameters are evaluated which indicate more stability of the PMT solution in presence of NaCl. PMT shows phase separation also. The cloud point (CP) of PMT decreases with increase in pH due to deprotonation of the drug molecules. Ureas decreased the CP and the behavior is explained on the basis of removal of water from the head group region.     

Electronic phase separation in transition metal oxide systems

Electronic phase separation is increasingly getting recognized as a phenomenon of importance in understanding the magnetic and electron transport properties of transition metal oxides. The phenomenon dominates the rare-earth manganates of the formula Ln(1-x)A(x)MnO(3)(Ln = rare earth and A = alkaline earth) which exhibit ferromagnetism and metallicity as well as charge-ordering, depending on the composition, size of A-site cations and external factors such as magnetic and electric fields. We discuss typical phase separation scenarios in the manganates, with particular reference to Pr(1-x)Ca(x)MnO(3)(x= 0.3-0.4), (La(1-x)Ln(x))(0.7)Ca(0.3)MnO(3)(Ln = Pr, Nd, Gd and Y) and Nd(0.5)Sr(0.5)MnO(3). Besides discussing the magnetic and electron transport properties, we discuss electric field effects. Rare-earth cobaltates of the type Pr(0.7)Ca(0.3)CoO(3) and Gd(0.5)Ba(0.5)CoO(3) also exhibit interesting magnetic and electron transport properties which can be understood in terms of phase separation.     

Faceted structures in Langmuir monolayers of diethylene glycol mono-n-octadecyl ether at the air--water interface

We have concurrently studied the surface pressure (pi) versus area (A) isotherms and microscopic surface morphological features of Langmuir monolayers of diethylene glycol mono-n-octadecyl ether (C18E2) by film balance and Brewster angle microscopy (BAM) over a wide range of temperature. At temperatures < or =10 degrees C, the monolayers exist in the form of condensed phase even just after the evaporation of the spreading solvent, suggesting that the melting point of the condensed phase is above this temperature. At > or =15 degrees C, the monolayers can exist as gas (G), liquid expanded (LE), and liquid condensed (LC) phases and undergo a pressure-induced first-order phase transition between LE and LC phases showing a sharp cusp point followed by a plateau region in the pi-A isotherms. A variety of 2-D structures, depending on the subphase temperature, are observed by BAM just after the appearance of the cusp point. It is interesting to note here that the domains attain increasingly large and compact shape as the subphase temperature increases and finally give faceted structures with sharp edges and corners at > or =30 degrees C. The BAM observations were coupled with polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) to gain better understanding regarding the conformational order and subcell packing of the molecules. The constancy of the methylene stretching modes over the studied temperature range suggests that the hydrocarbon chains do not undergo any conformational changes upon compression of the monolayer. However, the full width at half-maximum (fwhm) values of the asymmetric methylene stretching mode (nu(as)(CH(2))) are found to respond differently with changes in temperature. It is concluded that even though the trans/gauche ratio of the hydrocarbon chains remains virtually constant, the LE-LC phase transition upon compression of the monolayer is accompanied by a loss of the rotational freedom of the molecules.     

Computer-assisted optimization of reversed-phase HPLC isocratic separation of neutral compounds

An appropriate optimization strategy should be used to find a desired resolution or selectivity with a minimum number of experiments in a limited time, which could assure the baseline separation of all target compounds. It was usually realized by means of a specialized computer program. In this paper, mapping optimization method and overlapping resolution mapping were compared for the optimization of a reversed-phase high-performance liquid chromatography (HPLC) isocratic separation of neutral compounds. The calculated resolutions and separation time of 7 to 10 experiments are fitted by different equations, which were used to build a contour plot with a minimum effective resolution and maximum retention time as a function of a mobile phase composition. The balance between resolution and analysis time could be easily realized by the overlapping of the final overlapping resolution mapping and analysis time mapping. The validity of the two methods was confirmed by some typical experiments. The models are simple, visual, and common without theoretical arithmetic.     

De novo enantioselective syntheses of galacto-sugars and deoxy sugars via the iterative dihydroxylation of dienoate

An efficient route to various sugar lactones has been developed. Key to the overall transformation is the sequential osmium-catalyzed dihydroxylation of 2,4-dienoates. The simplest (one-step/racemic) example of this reaction occurs when the dihydroxylation is performed with aqueous NMO in MeOH. When the first dihydroxylation is performed using the AD-mix procedure, an enantioselective variant results. When a matched AD-mix procedure is used for the second dihydroxylation, an exceedingly diastereo- and enantioselective synthesis of galacto-1,4-lactone results. [Reaction: see text]     

Reversible colorimetric probes for mercury sensing

The selectivity and sensitivity of two colorimetric sensors based on the ruthenium complexes N719 [bis(2,2'-bipyridyl-4,4'-dicarboxylate)ruthenium(II) bis(tetrabutylammonium) bis(thiocyanate)] and N749 [(2,2':6',2' '-terpyridine-4,4',4' '-tricarboxylate)ruthenium(II) tris(tetrabutylammonium) tris(isothiocyanate)] are described. It was found that mercury ions coordinate reversibly to the sulfur atom of the dyes' NCS groups. This interaction induces a color change in the dyes at submicromolar concentrations of mercury. Furthermore, the color change of these dyes is selective for mercury(II) when compared with other ions such as lead(II), cadmium(II), zinc(II), or iron(II). The detection limit for mercury(II) ions--using UV-vis spectroscopy--in homogeneous aqueous solutions is estimated to be approximately 20 ppb for N719 and approximately 150 ppb for N749. Moreover, the sensor molecules can be adsorbed onto high-surface-area mesoporous metal oxide films, allowing reversible heterogeneous sensing of mercury ions in aqueous solution. The results shown herein have important implications in the development of new reversible colorimetric sensors for the fast, easy, and selective detection and monitoring of mercuric ions in aqueous solutions.     

Unexpected, drastic effect of triflic acid on oxidative diacetoxylation of iodoarenes by sodium perborate. A facile and efficient one-pot synthesis of (diacetoxyiodo)arenes

An easy, safe, and effective method for preparing (diacetoxyiodo)arenes from iodoarenes is presented. Addition of trifluoromethanesulfonic acid (triflic acid) as a promoter causes a drastic increase in the yield of (diacetoxyiodo)arenes in the reaction of iodoarenes with sodium perborate. The reaction of the iodoarenes with sodium perborate in acetic acid in the presence of triflic acid at 40-45 degrees C efficiently generates the corresponding (diacetoxyiodo)arenes in high yields within short time.