Studies on Melamine Modified Polyesteramide as Anticorrosive Coatings from Linseed Oil: A Sustainable Resource

Melamine modified polyester amide (MPEA) was synthesized by the reaction of linseed oil fatty amide. The resin was further cured at room temperature by polystyrene co‐maleic anhydride (SMA) in different phr (30–80) to obtain MPEA coatings. The probable structure of MPEA was confirmed by FT‐IR, ¹H‐NMR and ¹³C‐NMR spectroscopic techniques. The physico‐chemical characterization of these resins viz. iodine value, saponification value, refractive index, inherent viscosity were carried out by standard methods. MPEA (40 wt%) solution in ethylene glycol monomethyl ether (EGME) was applied on a mild steel strip of standard sizes to study their physico‐mechanical and chemical resistance properties. It was found that coatings of MPEA with 60 parts per hundred of the resin (phr) of SMA showed the best performance in physico‐mechanical and alkali resistance properties. Thermal stability and curing behavior were studied by Thermo Gravimetric Analyses (TGA) and Differential Scanning Calorimetry (DSC), respectively.     

Moisture absorption and diffusion in an underfill encapsulant at T > T g and T < T g

Moisture absorption and diffusion behavior of an underfill material used for electronic packaging with a glass transition temperature (T _g) slightly above room temperature have been investigated by the sorption thermogravimetric analysis technique. It has been found that moisture diffusion in this material follows the Fick’s diffusion model, and moisture absorption–desorption is reversible and repeatable. Based on moisture-induced mass gain versus time curve, the diffusion constant can be determined. It was found that below T _g, moisture diffusivity exhibits an Arrhenius temperature dependence, which changes to a different Arrhenius temperature dependence as the temperature increases to T > T _g. The change in diffusivity from T < T _g to T > T _g is accompanied by a significant decrease in the energy barrier for moisture diffusion. Results shed light on the change in moisture diffusion in polymer-based materials in the glassy and the rubbery state.     

Molecularly imprinted polyaniline-polyvinyl sulphonic acid composite based sensor for para-nitrophenol detection

We report results of the studies relating to the fabrication and characterization of a conducting polymer based molecularly imprinted para-nitrophenol (PNP) sensor. A water pollutant, para-nitrophenol is electrochemically imprinted with polyvinyl sulphonic acid (PVSA) doped polyaniline onto indium tin oxide (ITO) glass substrate. This PNP imprinted electrode (PNPI-PANI-PVSA/ITO) prepared via chronopotentiometric polymerization and over-oxidation is characterized by Fourier transform infra-red spectroscopy (FT-IR), UV–visible (UV–vis) spectroscopy, contact angle (CA), scanning electron microscopy (SEM), cyclic voltammetry (CV) and differential pulse voltammetry (DPV) studies. The response studies of PNPI-PANI-PVSA/ITO electrode carried out using DPV reveal a lower detection limit of 1 × 10⁻³ mM, improved sensitivity as 1.5 × 10⁻³ A mM⁻¹ and stability of 45 days. The PNPI-PANI-PVSA/ITO electrode shows good precision with relative standard deviation of 2.1% and good reproducibility with standard deviation of 3.78%.     

Synthesis,Characterization, and In Vitro Antimicrobial Activity of Methyleneamine‐Linked Bis‐heterocycles

A new class of methyleneamine‐linked bis‐heterocycles that exhibit antimicrobial activity was synthesized. Bromination of 1 followed by condensation with thiourea gave 3 . The reaction of 3 with propargyl bromide in dry toluene under inert atmosphere led to the formation of 4 . Its subsequent reaction with different nitrile oxides using CuSO₄.5H₂O–sodiumascorbate system in a 2:1 mixture of water and tert‐butyl alcohol yielded the title compounds 6a , 6b , 6c , 6d , 6e , 6f , 6g , 6h , 6i , 6j , 6k , 6l in good yields. The identities of these compounds were confirmed following elemental analysis, IR, ¹H, ¹³C NMR, and mass spectral studies. All the title compounds exhibited pronounced in vitro antibacterial and antifungal activities.     

Synthesis of (±)-2-Methoxy-9a-Carbamorphinan and (±)-2-Methoxy-9a-Carba-14α-Morphinan: Acid Catalyzed Cyclizations of 1-m-Methoxybenzyl-4, 4a,5,6,7,8-Hexahydronaphthalen-2(3H)-ONE and 1 -m-Methox Ybenzyloctalins

The bridged-ethers, (±)-2-methoxy-9a-carbamorphinan (1b) and (±)-2-methoxy-9a-carba-14α-morphinan(2b) have been synthesized. The acid-catalyzed cyclizations of 1-m-methoxy benzyloctalone 3b and 1-m-methoxybenzyloctalins 4b proceed with high regio-and stereoselectivities leading mostly to the bridged-ketone 14 and ether 1b respectively, along with o-methoxy-tetracyclic ketone 15 and the ether 17, in addition to other minor products.     

Water Structure Modification by Sugars and Its Consequence on Micellization Behavior of Cetyltrimethylammonium Bromide in Aqueous Solution

Water structure modification by sugars with a wide difference in stereoregular structures ranging from monosaccharide to trisaccharide and its consequence on the micellization behavior of cetyltrimethylammonium bromide (CTAB) in aqueous medium have been investigated. The characteristic variation in water absorption peaks in the presence of d(?)fructose has been studied by near-infrared spectroscopy. The analyses show that the hydrogen bonding capability of d(+)glucose, d(?)fructose, sucrose, trehalose and raffinose is mainly responsible for the variation in water-additive interactions. The critical micelle concentration determined by specific conductivity measurement and aggregation number determined by steady state fluorescence quenching method show significant variations in presence of additives for CTAB in aqueous solution. The sugars interact with the water structure to varying extents owing to differences in hydrogen bonding capability depending on the stereoregularity of the structure. This induces differences in the microenvironment for competition between the hydrophobic interaction and degree of hydration of the hydrophilic group of the surfactant to ultimately influence the micellization behavior in aqueous solution.     

Effect of ethylene-co-vinyl acetate-glycidylmethacrylate and cellulose microfibers on the thermal,rheological and biodegradation properties of poly(lactic acid) based systems

The properties and biodegradation behavior of blends of poly(lactic acid) (PLA) and ethylene-vinyl acetate-glycidylmethacrylate copolymer (EVA-GMA), and their composites with cellulose microfibers (CF) were investigated. The blends and composites were obtained by melt mixing and the morphology, phase behavior, thermal and rheological properties of PLA/EVA-GMA blends and PLA/EVA-GMA/CF composite films were investigated as a function of the composition. The disintegrability in composting conditions was examined by means of morphological, thermal and chemical analyses to gain insights into the post-use degradation processes. The results indicated a good compatibility of the two polymers in the blends with copolymer content up to 30 wt.%, while at higher EVA-GMA content a phase separation was observed. In the composites, the presence of EVA-GMA contributes to improve the interfacial adhesion between cellulose fibers and PLA, due to interactions of the epoxy groups of GMA with hydroxyls of CF. The addition of cellulose microfibers in PLA/EVA-GMA system modifies the rheological behavior, since complex viscosity increased in presence of fibers and decreased with an increase in frequency. Disintegration tests showed that the addition of EVA-GMA influence the PLA disintegration process, and after 21 days in composting conditions, blends and composites showed faster degradation rate in comparison with neat PLA due to the different morphologies induced by the presence of EVA-GMA and CF phases able to allow a faster water diffusion and an efficient PLA degradation process.     

Micellization and Clouding Phenomenon of Phenothiazine Drug Promethazine Hydrochloride: Effect of NaCl and Urea Addition

Herein we report the micellization and clouding behavior of promethazine hydrochloride (PMT) in absence and presence of NaCl/ureas. The critical micelle concentration (CMC) of PMT is measured by conductivity method and the values decrease with increasing the NaCl concentration. With increasing the temperature, the CMC first increases then decreases. At 25°C, the maximum CMC values were obtained (with or without NaCl). The thermodynamic parameters are evaluated which indicate more stability of the PMT solution in presence of NaCl. PMT shows phase separation also. The cloud point (CP) of PMT decreases with increase in pH due to deprotonation of the drug molecules. Ureas decreased the CP and the behavior is explained on the basis of removal of water from the head group region.     

Acyclovir-Loaded Chitosan Microspheres for Gastroretention: Development and Evaluation

Mucoadhesive chitosan microspheres of acyclovir were prepared to prolong the gastric residence time using simple emulsification phase separation technique. The particle morphology of drug-loaded formulations was measured by SEM and the particle size distribution was determined using an optical microscope. The release profile of acyclovir from microspheres was examined in simulated gastric fluid (SGF pH 1.2). The particles were found to be discreet and spherical with the maximum particles of an average size (31.62 ± 4.64). The entrapment efficiency was found to be in the range of 40.24 to 67.29%. The concentration of the glutaraldehyde (25%v/v) as a cross-linker 2 ml and drug polymer ratio of 1:2 caused an increase in the entrapment efficiency and the extent of drug release. The optimized chitosan microspheres were found to possess good bioadhesion (79.89 ± 1.01%). The gamma-scintigraphy study showed the gastric residence time of more than 6 hours which revealed that optimized formulation could be a good choice for gastroretentive systems.